[PATCH] arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node

[Krzysztof Kozlowski]

The DSI OPP table on SDM630 is used by one DSI0, but on SDM660 is shared
by two nodes (DSI0 and DSI1), thus it should be rather in top-level, not
in DSI0.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

A cleanup patch to commit a2e5260d0755 ("arm64: dts: qcom: sdm630: move
DSI opp-table into DSI node").

Follow-up to:
https://lore.kernel.org/all/20230407163442.ckbd4vxa5b2xu3eu@ripper/
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 38 ++++++++++++++--------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 8bdb36a63474..b91e423a3cfc 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -328,6 +328,25 @@ memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-131250000 {
+			opp-hz = /bits/ 64 <131250000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-210000000 {
+			opp-hz = /bits/ 64 <210000000>;
+			required-opps = <&rpmpd_opp_svs_plus>;
+		};
+
+		opp-262500000 {
+			opp-hz = /bits/ 64 <262500000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -1591,25 +1610,6 @@ dsi0: dsi@c994000 {
 
 				status = "disabled";
 
-				dsi_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					opp-131250000 {
-						opp-hz = /bits/ 64 <131250000>;
-						required-opps = <&rpmpd_opp_svs>;
-					};
-
-					opp-210000000 {
-						opp-hz = /bits/ 64 <210000000>;
-						required-opps = <&rpmpd_opp_svs_plus>;
-					};
-
-					opp-262500000 {
-						opp-hz = /bits/ 64 <262500000>;
-						required-opps = <&rpmpd_opp_nom>;
-					};
-				};
-
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
-- 
2.34.1