[PATCH v2 3/4] staging: rtl8192e: Remove one of two checks for hardware RTL8192SE

[Philipp Hortmann]

Check for hardware RTL8192SE is done in function _rtl92e_pci_probe()
directly and also two lines later in function rtl92e_check_adapter().
Remove top level check to increase readability.
This pci_read does not follow a pci_write to ensure data is written to
the device.

Signed-off-by: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
---
v1->v2: Added check for pci_read does not follow pci_write.
---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index 7506d7eb7b4c..45989a77a27c 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -2130,7 +2130,6 @@ static int _rtl92e_pci_probe(struct pci_dev *pdev,
 	struct r8192_priv *priv = NULL;
 	unsigned long pmem_start, pmem_len, pmem_flags;
 	int err = -ENOMEM;
-	u8 revision_id;
 
 	if (pci_enable_device(pdev)) {
 		dev_err(&pdev->dev, "Failed to enable PCI device");
@@ -2189,11 +2188,6 @@ static int _rtl92e_pci_probe(struct pci_dev *pdev,
 	dev->mem_start = ioaddr;
 	dev->mem_end = ioaddr + pci_resource_len(pdev, 0);
 
-	pci_read_config_byte(pdev, 0x08, &revision_id);
-	/* If the revisionid is 0x10, the device uses rtl8192se. */
-	if (pdev->device == 0x8192 && revision_id == 0x10)
-		goto err_unmap;
-
 	if (!rtl92e_check_adapter(pdev, dev))
 		goto err_unmap;
 
-- 
2.40.0