Re: [PATCH V3 2/7] clk: imx: fracn-gppll: disable hardware select control

[Abel Vesa]

On 23-04-03 17:52:55, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@xxxxxxx>
> 
> When programming PLL, should disable Hardware control select to make PLL
> controlled by register, not hardware inputs through OSCPLL.
> 
> Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>

Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxx>

> ---
>  drivers/clk/imx/clk-fracn-gppll.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
> index ec50c41e2a4c..f6674110a88e 100644
> --- a/drivers/clk/imx/clk-fracn-gppll.c
> +++ b/drivers/clk/imx/clk-fracn-gppll.c
> @@ -15,6 +15,7 @@
>  #include "clk.h"
>  
>  #define PLL_CTRL		0x0
> +#define HW_CTRL_SEL		BIT(16)
>  #define CLKMUX_BYPASS		BIT(2)
>  #define CLKMUX_EN		BIT(1)
>  #define POWERUP_MASK		BIT(0)
> @@ -193,6 +194,11 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
>  
>  	rate = imx_get_pll_settings(pll, drate);
>  
> +	/* Hardware control select disable. PLL is control by register */
> +	tmp = readl_relaxed(pll->base + PLL_CTRL);
> +	tmp &= ~HW_CTRL_SEL;
> +	writel_relaxed(tmp, pll->base + PLL_CTRL);
> +
>  	/* Disable output */
>  	tmp = readl_relaxed(pll->base + PLL_CTRL);
>  	tmp &= ~CLKMUX_EN;
> -- 
> 2.37.1
>