[PATCH 3/3] ARM: dts: qcom: msm8974: remove superfluous "input-enable"

[Krzysztof Kozlowski]

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts      | 2 --
 arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi         | 1 -
 arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts           | 1 -
 arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts            | 4 ----
 .../boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts   | 1 -
 5 files changed, 9 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index ab35f2d644c0..861695cecf84 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -592,7 +592,6 @@ mpu6515_pin: mpu6515-state {
 		pins = "gpio73";
 		function = "gpio";
 		bias-disable;
-		input-enable;
 	};
 
 	touch_pin: touch-state {
@@ -602,7 +601,6 @@ int-pins {
 
 			drive-strength = <2>;
 			bias-disable;
-			input-enable;
 		};
 
 		reset-pins {
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
index d3bec03b126c..68a2f9094e53 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -433,7 +433,6 @@ ts_int_pin: touch-int-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	sdc1_on: sdc1-on-state {
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
index 8d2a054d8fee..8230d0e1d95d 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
@@ -461,7 +461,6 @@ int-pins {
 			function = "gpio";
 			drive-strength = <2>;
 			bias-disable;
-			input-enable;
 		};
 
 		reset-pins {
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
index b9698ffb66ca..eb505d6d7f31 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -704,7 +704,6 @@ hostwake-pins {
 			pins = "gpio75";
 			function = "gpio";
 			drive-strength = <16>;
-			input-enable;
 		};
 
 		devwake-pins {
@@ -760,14 +759,12 @@ cmd-data-pins {
 	i2c_touchkey_pins: i2c-touchkey-state {
 		pins = "gpio95", "gpio96";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
 	i2c_led_gpioex_pins: i2c-led-gpioex-state {
 		pins = "gpio120", "gpio121";
 		function = "gpio";
-		input-enable;
 		bias-pull-down;
 	};
 
@@ -781,7 +778,6 @@ gpioex_pin: gpioex-state {
 	wifi_pin: wifi-state {
 		pins = "gpio92";
 		function = "gpio";
-		input-enable;
 		bias-pull-down;
 	};
 
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 04bc58d87abf..0f650ed31005 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -631,7 +631,6 @@ ts_int_pin: ts-int-pin-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	bt_host_wake_pin: bt-host-wake-state {
-- 
2.34.1