Re: [PATCH] virtio_pci: Wait for legacy device to be reset

[Michael S. Tsirkin]

On Tue, Apr 11, 2023 at 06:36:39AM +0000, Angus Chen wrote:
> Hi.
> 
> > -----Original Message-----
> > From: Jason Wang <jasowang@xxxxxxxxxx>
> > Sent: Tuesday, April 11, 2023 1:24 PM
> > To: Angus Chen <angus.chen@xxxxxxxxxxxxxxx>
> > Cc: mst@xxxxxxxxxx; virtualization@xxxxxxxxxxxxxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH] virtio_pci: Wait for legacy device to be reset
> > 
> > On Tue, Apr 11, 2023 at 9:39 AM Angus Chen <angus.chen@xxxxxxxxxxxxxxx>
> > wrote:
> > >
> > > We read the status of device after reset,
> > > It is not guaranteed that the device be reseted successfully.
> > > We can use a while loop to make sure that,like the modern device did.
> > > The spec is not request it ,but it work.
> > 
> > The only concern is if it's too late to do this.
> > 
> > Btw, any reason you want to have a legacy hardware implementation. It
> > will be very tricky to work correctly.
>   En,I found this in the real production environment some times about one year ago.
> and I fix this out of tree.our virtio card had been sold about thousands .
> 
>   Now,we created a new card, it support virtio 0.95,1.0,1.1 etc.

I am not 100% sure what does this mean.
So it's a transitional device then?


>   And we use this host vdpa+ legacy virtio in vm to hot migration,we found that the
>   Legacy model often get the middle state value after reset and probe again.
>   The Soc is Simulated by fpga which is run slower than the host,so the same bug 
>   Is found more frequently when the host use the other kernel like ubuntu or centos8.
> 
>   So we hope we can fix this by upstream .
> > 
> > Thanks
> > 
> > >
> > > Signed-off-by: Angus Chen <angus.chen@xxxxxxxxxxxxxxx>
> > > ---
> > >  drivers/virtio/virtio_pci_legacy.c | 4 +++-
> > >  1 file changed, 3 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
> > > index 2257f1b3d8ae..f2d241563e4f 100644
> > > --- a/drivers/virtio/virtio_pci_legacy.c
> > > +++ b/drivers/virtio/virtio_pci_legacy.c
> > > @@ -14,6 +14,7 @@
> > >   *  Michael S. Tsirkin <mst@xxxxxxxxxx>
> > >   */
> > >
> > > +#include <linux/delay.h>
> > >  #include "linux/virtio_pci_legacy.h"
> > >  #include "virtio_pci_common.h"
> > >
> > > @@ -97,7 +98,8 @@ static void vp_reset(struct virtio_device *vdev)
> > >         vp_legacy_set_status(&vp_dev->ldev, 0);
> > >         /* Flush out the status write, and flush in device writes,
> > >          * including MSi-X interrupts, if any. */
> > > -       vp_legacy_get_status(&vp_dev->ldev);
> > > +       while (vp_legacy_get_status(&vp_dev->ldev))
> > > +               msleep(1);
> > >         /* Flush pending VQ/configuration callbacks. */
> > >         vp_synchronize_vectors(vdev);
> > >  }
> > > --
> > > 2.25.1
> > >
>