[PATCH v4] dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties

[Manivannan Sadhasivam]

The Qcom PCIe controller is capable of using either internal MSI controller
or the external GIC-ITS for signaling MSIs sent by endpoint devices.
Currently, the binding only documents the internal MSI implementation.

Let's document the GIC-ITS imeplementation by making use of msi-map and
msi-map-mask properties. Only one of the implementation should be used
at a time and the drivers can choose the preferred one.

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---

Changes in v4:

* Spun off from the "Qcom: Add GIC-ITS support to SM8450 PCIe controllers"
  series and incorporated the change to allow both MSI implementations.
* Added Reviewed-by tag from Rob

Changes in v3:

* Reworded the commit messages as per Lorenzo's comments
* Rebased on top of v6.2-rc1

Changes in v2:

* Swapped the Device ID for PCIe0 as it causes same issue as PCIe1
* Removed the definition of msi-map and msi-map-mask from binding
* Added Ack from Krzysztof

 Documentation/devicetree/bindings/pci/qcom,pcie.yaml | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index 5d236bac99b6..b26fff04859d 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -130,14 +130,20 @@ required:
   - compatible
   - reg
   - reg-names
-  - interrupts
-  - interrupt-names
-  - "#interrupt-cells"
   - interrupt-map-mask
   - interrupt-map
   - clocks
   - clock-names
 
+anyOf:
+  - required:
+      - interrupts
+      - interrupt-names
+      - "#interrupt-cells"
+  - required:
+      - msi-map
+      - msi-map-mask
+
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
   - if:
-- 
2.25.1