Re: [PATCH v1 0/3] Add JH7110 cpufreq support

[Rafael J. Wysocki]

On Tue, Apr 11, 2023 at 10:33 AM Mason Huo <mason.huo@xxxxxxxxxxxxxxxx> wrote:
>
> The StarFive JH7110 SoC has four RISC-V cores,
> and it supports up to 4 cpu frequency loads.
>
> This patchset adds the compatible strings into the allowlist
> for supporting the generic cpufreq driver on JH7110 SoC.
> Also, it enables the axp15060 pmic for the cpu power source.
>
> The series has been tested on the VisionFive 2 boards which
> are equipped with JH7110 SoC and axp15060 pmic.
>
>
> This patchset is based on v6.3-rc4 with these patches applied:
> [1] ("Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC")
>     https://lore.kernel.org/all/20230401111934.130844-1-hal.feng@xxxxxxxxxxxxxxxx/
> [2] ("Add X-Powers AXP15060 PMIC support")
>     https://lore.kernel.org/all/TY3P286MB2611A814E580C96DC6F187B798969@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
>
> Mason Huo (3):
>   riscv: dts: starfive: Enable axp15060 pmic for cpufreq
>   cpufreq: dt-platdev: Add JH7110 SOC to the allowlist
>   riscv: dts: starfive: Add cpu scaling for JH7110 SoC
>
>  .../jh7110-starfive-visionfive-2.dtsi         | 40 +++++++++++++++++++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      | 25 ++++++++++++
>  drivers/cpufreq/cpufreq-dt-platdev.c          |  1 +
>  3 files changed, 66 insertions(+)

Viresh, can you have a look at this, please?

It is very similar to the ARM thing AFAICS.