[PATCH v4 0/3] Add EMAC3 support for sa8540p-ride (devicetree/clk bits)

[Andrew Halaney]

This is a forward port / upstream refactor of code delivered
downstream by Qualcomm over at [0] to enable the DWMAC5 based
implementation called EMAC3 on the sa8540p-ride dev board.

>From what I can tell with the board schematic in hand,
as well as the code delivered, the main changes needed are:

    1. A new address space layout for dwmac5/EMAC3 MTL/DMA regs
    2. A new programming sequence required for the EMAC3 base platforms

This series addresses the devicetree and clock changes to support this
hardware bringup.

As requested[1], it has been split up by compile deps / maintainer tree.
The associated v4 of the netdev specific changes can be found at [2].
Together, they result in the ethernet controller working for
both controllers on this platform.

[0] https://git.codelinaro.org/clo/la/kernel/ark-5.14/-/commit/510235ad02d7f0df478146fb00d7a4ba74821b17
[1] https://lore.kernel.org/netdev/20230320202802.4e7dc54c@xxxxxxxxxx/
[2] https://lore.kernel.org/netdev/20230411200409.455355-1-ahalaney@xxxxxxxxxx/T/#t

v3: https://lore.kernel.org/netdev/20230331215804.783439-1-ahalaney@xxxxxxxxxx/T/#m2f267485d215903494d9572507417793e600b2bf
v2: https://lore.kernel.org/netdev/20230320221617.236323-1-ahalaney@xxxxxxxxxx/
v1: https://lore.kernel.org/netdev/20230313165620.128463-1-ahalaney@xxxxxxxxxx/

Thanks,
Andrew


Andrew Halaney (3):
  clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
  arm64: dts: qcom: sc8280xp: Add ethernet nodes
  arm64: dts: qcom: sa8540p-ride: Add ethernet nodes

 arch/arm64/boot/dts/qcom/sa8540p-ride.dts     | 180 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        |  59 ++++++
 drivers/clk/qcom/gcc-sc8280xp.c               |  18 ++
 include/dt-bindings/clock/qcom,gcc-sc8280xp.h |   2 +
 4 files changed, 259 insertions(+)

-- 
2.39.2