Re: [PATCH v7 1/4] PM: Add sysfs files to represent time spent in hardware sleep state
From: Box, David E
Date: Tue Apr 11 2023 - 20:59:14 EST
Hi,
On Tue, 2023-04-11 at 21:49 +0000, Limonciello, Mario wrote:
> [Public]
>
> >
> > On 4/11/23 23:17, Mario Limonciello wrote:
> > > Userspace can't easily discover how much of a sleep cycle was spent in a
> > > hardware sleep state without using kernel tracing and vendor specific
> > > sysfs
> > > or debugfs files.
> > >
> > > To make this information more discoverable, introduce two new sysfs files:
> > > 1) The time spent in a hw sleep state for last cycle.
> > > 2) The time spent in a hw sleep state since the kernel booted
> > > Both of these files will be present only if the system supports s2idle.
> > >
> > > Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
> > > ---
> > > v6->v7:
> > > * Rename to max_hw_sleep (David E Box)
> > > * Drop overflow checks (David E Box)
> > > v5->v6:
> > > * Add total attribute as well
> > > * Change text for documentation
> > > * Adjust flow of is_visible callback.
> > > * If overflow was detected in total attribute return -EOVERFLOW
> > > * Rename symbol
> > > * Add stub for symbol for builds without CONFIG_PM_SLEEP
> > > v4->v5:
> > > * Provide time in microseconds instead of percent. Userspace can convert
> > > this if desirable.
> > > ---
> > > Documentation/ABI/testing/sysfs-power | 24 ++++++++++++++++
> > > include/linux/suspend.h | 5 ++++
> > > kernel/power/main.c | 40 +++++++++++++++++++++++++++
> > > 3 files changed, 69 insertions(+)
> > >
> > > diff --git a/Documentation/ABI/testing/sysfs-power
> > b/Documentation/ABI/testing/sysfs-power
> > > index f99d433ff311..0723b4dadfbe 100644
> > > --- a/Documentation/ABI/testing/sysfs-power
> > > +++ b/Documentation/ABI/testing/sysfs-power
> > > @@ -413,6 +413,30 @@ Description:
> > > The /sys/power/suspend_stats/last_failed_step file
> > > contains
> > > the last failed step in the suspend/resume path.
> > >
> > > +What: /sys/power/suspend_stats/last_hw_sleep
> > > +Date: June 2023
> > > +Contact: Mario Limonciello <mario.limonciello@xxxxxxx>
> > > +Description:
> > > + The /sys/power/suspend_stats/last_hw_sleep file
> > > + contains the duration of time spent in a hardware sleep
> > > + state in the most recent system suspend-resume cycle.
> > > + This number is measured in microseconds.
> > > +
> > > + NOTE: Limitations in the size of the hardware counters may
> > > + cause this value to be inaccurate in longer sleep cycles.
> >
> > Hmm I thought that the plan was to add a separate sysfs attr with
> > the max time that the hw could represent here, so that userspace
> > actually know what constitutes a "longer sleep cycle" ?
> >
> > That would seem better then such a handwavy comment in the ABI docs?
>
> I obviously misunderstood what you were suggesting.
> I don't believe we have a way to programmatically determine what the hardware
> Internally uses for it's counter to know this.
>
> So it would need to be a table of some sorts that a given system can support
> such value. If we do that, we can actually know whether to return an error
> code
> like -EOVERFLOW or -EINVAL too if the suspend was too long.
>
> I would need Intel guys to share this information though which systems have
> which size of counters to make this happen.
For Intel all the s0ix counters are 32 bit. If the maximum sleep time is
reported in microseconds it's just
((1UL << 32) - 1) * slp_s0_res_counter_step,
where slp_s0_res_counter_step is the platform specific counter granularity in
microseconds. There are some platform specific tweaks (of course). If you
provide a function to call, I can write the patch for intel_pmc_core.
>
> >
> > > +
> > > +What: /sys/power/suspend_stats/max_hw_sleep
> > > +Date: June 2023
> > > +Contact: Mario Limonciello <mario.limonciello@xxxxxxx>
> > > +Description:
> > > + The /sys/power/suspend_stats/max_hw_sleep file
> > > + contains the aggregate of time spent in a hardware sleep
> > > + state since the kernel was booted. This number
> > > + is measured in microseconds.
> > > +
> > > + NOTE: Limitations in the size of the hardware counters may
> > > + cause this value to be inaccurate in longer sleep cycles.
> >
> > Maybe "total_hw_sleep" instead of "max_hw_sleep" ? Also since max to
> > me sounds like the limit of the longest sleep the hw counters can
> > register, so that is bit confusing with the discussion about those
> > limits.
>
> total_hw_sleep is actually what was in v6 and max_hw_sleep is what suggested.
> That's why I got confused about what you guys meant.
Sorry, I meant max_hw_sleep for the additional attribute as Hans mentioned.
David
>
> >
> > Regards,
> >
> > Hans
> >
> >
> >
> > > +
> > > What: /sys/power/sync_on_suspend
> > > Date: October 2019
> > > Contact: Jonas Meurer <jonas@xxxxxxxxxxxxxxx>
> > > diff --git a/include/linux/suspend.h b/include/linux/suspend.h
> > > index cfe19a028918..819e9677fd10 100644
> > > --- a/include/linux/suspend.h
> > > +++ b/include/linux/suspend.h
> > > @@ -68,6 +68,8 @@ struct suspend_stats {
> > > int last_failed_errno;
> > > int errno[REC_FAILED_NUM];
> > > int last_failed_step;
> > > + u64 last_hw_sleep;
> > > + u64 max_hw_sleep;
> > > enum suspend_stat_step failed_steps[REC_FAILED_NUM];
> > > };
> > >
> > > @@ -489,6 +491,7 @@ void restore_processor_state(void);
> > > extern int register_pm_notifier(struct notifier_block *nb);
> > > extern int unregister_pm_notifier(struct notifier_block *nb);
> > > extern void ksys_sync_helper(void);
> > > +extern void pm_report_hw_sleep_time(u64 t);
> > >
> > > #define pm_notifier(fn, pri) { \
> > > static struct notifier_block fn##_nb = \
> > > @@ -526,6 +529,8 @@ static inline int unregister_pm_notifier(struct
> > notifier_block *nb)
> > > return 0;
> > > }
> > >
> > > +static inline void pm_report_hw_sleep_time(u64 t) {};
> > > +
> > > static inline void ksys_sync_helper(void) {}
> > >
> > > #define pm_notifier(fn, pri) do { (void)(fn); } while (0)
> > > diff --git a/kernel/power/main.c b/kernel/power/main.c
> > > index 31ec4a9b9d70..a5546b91ecc9 100644
> > > --- a/kernel/power/main.c
> > > +++ b/kernel/power/main.c
> > > @@ -6,6 +6,7 @@
> > > * Copyright (c) 2003 Open Source Development Lab
> > > */
> > >
> > > +#include <linux/acpi.h>
> > > #include <linux/export.h>
> > > #include <linux/kobject.h>
> > > #include <linux/string.h>
> > > @@ -83,6 +84,13 @@ int unregister_pm_notifier(struct notifier_block *nb)
> > > }
> > > EXPORT_SYMBOL_GPL(unregister_pm_notifier);
> > >
> > > +void pm_report_hw_sleep_time(u64 t)
> > > +{
> > > + suspend_stats.last_hw_sleep = t;
> > > + suspend_stats.max_hw_sleep += t;
> > > +}
> > > +EXPORT_SYMBOL_GPL(pm_report_hw_sleep_time);
> > > +
> > > int pm_notifier_call_chain_robust(unsigned long val_up, unsigned long
> > val_down)
> > > {
> > > int ret;
> > > @@ -377,6 +385,22 @@ static ssize_t last_failed_step_show(struct kobject
> > *kobj,
> > > }
> > > static struct kobj_attribute last_failed_step =
> > __ATTR_RO(last_failed_step);
> > >
> > > +static ssize_t last_hw_sleep_show(struct kobject *kobj,
> > > + struct kobj_attribute *attr, char *buf)
> > > +{
> > > + return sysfs_emit(buf, "%llu\n", suspend_stats.last_hw_sleep);
> > > +}
> > > +static struct kobj_attribute last_hw_sleep = __ATTR_RO(last_hw_sleep);
> > > +
> > > +static ssize_t max_hw_sleep_show(struct kobject *kobj,
> > > + struct kobj_attribute *attr, char *buf)
> > > +{
> > > + if (suspend_stats.max_hw_sleep == -EOVERFLOW)
> > > + return suspend_stats.max_hw_sleep;
> > > + return sysfs_emit(buf, "%llu\n", suspend_stats.max_hw_sleep);
> > > +}
> > > +static struct kobj_attribute max_hw_sleep =
> > __ATTR_RO(max_hw_sleep);
> > > +
> > > static struct attribute *suspend_attrs[] = {
> > > &success.attr,
> > > &fail.attr,
> > > @@ -391,12 +415,28 @@ static struct attribute *suspend_attrs[] = {
> > > &last_failed_dev.attr,
> > > &last_failed_errno.attr,
> > > &last_failed_step.attr,
> > > + &last_hw_sleep.attr,
> > > + &max_hw_sleep.attr,
> > > NULL,
> > > };
> > >
> > > +static umode_t suspend_attr_is_visible(struct kobject *kobj, struct
> > attribute *attr, int idx)
> > > +{
> > > + if (attr != &last_hw_sleep.attr &&
> > > + attr != &max_hw_sleep.attr)
> > > + return 0444;
> > > +
> > > +#ifdef CONFIG_ACPI
> > > + if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)
> > > + return 0444;
> > > +#endif
> > > + return 0;
> > > +}
> > > +
> > > static const struct attribute_group suspend_attr_group = {
> > > .name = "suspend_stats",
> > > .attrs = suspend_attrs,
> > > + .is_visible = suspend_attr_is_visible,
> > > };
> > >
> > > #ifdef CONFIG_DEBUG_FS