Re: [PATCH 20/27] arm64: dts: mediatek: mt6795: Add tertiary PWM node

[Matthias Brugger]

On 12/04/2023 13:27, AngeloGioacchino Del Regno wrote:
> The PWM at 0x11006000 is the tertiary PWM; unlike PWM0, PWM1, this is
> not display specific and can be used as a generic PWM controller.
>
> This node is left disabled as usage is board-specific.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

Applied, thanks!

> ---
>   arch/arm64/boot/dts/mediatek/mt6795.dtsi | 19 +++++++++++++++++++
>   1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
> index cf45cb4ad3d2..50d9276d18c6 100644
> --- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
> @@ -583,6 +583,25 @@ uart3: serial@11005000 {
>   			status = "disabled";
>   		};
>   
> +		pwm2: pwm@11006000 {
> +			compatible = "mediatek,mt6795-pwm";
> +			reg = <0 0x11006000 0 0x1000>;
> +			#pwm-cells = <2>;
> +			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_PWM_SEL>,
> +				 <&pericfg CLK_PERI_PWM>,
> +				 <&pericfg CLK_PERI_PWM1>,
> +				 <&pericfg CLK_PERI_PWM2>,
> +				 <&pericfg CLK_PERI_PWM3>,
> +				 <&pericfg CLK_PERI_PWM4>,
> +				 <&pericfg CLK_PERI_PWM5>,
> +				 <&pericfg CLK_PERI_PWM6>,
> +				 <&pericfg CLK_PERI_PWM7>;
> +			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
> +				      "pwm4", "pwm5", "pwm6", "pwm7";
> +			status = "disabled";
> +		};
> +
>   		i2c0: i2c@11007000 {
>   			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
>   			reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>;