[PATCH v2 02/17] iommu/vt-d: Allow SVA with device-specific IOPF

[Lu Baolu]

Currently enabling SVA requires IOPF support from the IOMMU and device
PCI PRI. However, some devices can handle IOPF by itself without ever
sending PCI page requests nor advertising PRI capability.

Allow SVA support with IOPF handled either by IOMMU (PCI PRI) or device
driver (device-specific IOPF). As long as IOPF could be handled, SVA
should continue to work.

Reviewed-by: Kevin Tian <kevin.tian@xxxxxxxxx>
Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230324120234.313643-3-baolu.lu@xxxxxxxxxxxxxxx
---
 drivers/iommu/intel/iommu.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 7c2f4bd33582..caf664448ee9 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4650,7 +4650,21 @@ static int intel_iommu_enable_sva(struct device *dev)
 	if (!(iommu->flags & VTD_FLAG_SVM_CAPABLE))
 		return -ENODEV;
 
-	if (!info->pasid_enabled || !info->pri_enabled || !info->ats_enabled)
+	if (!info->pasid_enabled || !info->ats_enabled)
+		return -EINVAL;
+
+	/*
+	 * Devices having device-specific I/O fault handling should not
+	 * support PCI/PRI. The IOMMU side has no means to check the
+	 * capability of device-specific IOPF.  Therefore, IOMMU can only
+	 * default that if the device driver enables SVA on a non-PRI
+	 * device, it will handle IOPF in its own way.
+	 */
+	if (!info->pri_supported)
+		return 0;
+
+	/* Devices supporting PRI should have it enabled. */
+	if (!info->pri_enabled)
 		return -EINVAL;
 
 	ret = iopf_queue_add_device(iommu->iopf_queue, dev);
-- 
2.34.1