[PATCH v2 04/17] iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path

[Lu Baolu]

They should be part of the per-device iommu private data initialization.

Reviewed-by: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
Reviewed-by: Kevin Tian <kevin.tian@xxxxxxxxx>
Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230324120234.313643-5-baolu.lu@xxxxxxxxxxxxxxx
---
 drivers/iommu/intel/iommu.c | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index a6f07c74da2d..6d77b4072fdd 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1406,20 +1406,6 @@ static void iommu_enable_pci_caps(struct device_domain_info *info)
 		return;
 
 	pdev = to_pci_dev(info->dev);
-	/* For IOMMU that supports device IOTLB throttling (DIT), we assign
-	 * PFSID to the invalidation desc of a VF such that IOMMU HW can gauge
-	 * queue depth at PF level. If DIT is not set, PFSID will be treated as
-	 * reserved, which should be set to 0.
-	 */
-	if (!ecap_dit(info->iommu->ecap))
-		info->pfsid = 0;
-	else {
-		struct pci_dev *pf_pdev;
-
-		/* pdev will be returned if device is not a vf */
-		pf_pdev = pci_physfn(pdev);
-		info->pfsid = pci_dev_id(pf_pdev);
-	}
 
 	/* The PCIe spec, in its wisdom, declares that the behaviour of
 	   the device if you enable PASID support after ATS support is
@@ -1438,7 +1424,6 @@ static void iommu_enable_pci_caps(struct device_domain_info *info)
 	    !pci_enable_ats(pdev, VTD_PAGE_SHIFT)) {
 		info->ats_enabled = 1;
 		domain_update_iotlb(info->domain);
-		info->ats_qdep = pci_ats_queue_depth(pdev);
 	}
 }
 
@@ -4521,6 +4506,17 @@ static struct iommu_device *intel_iommu_probe_device(struct device *dev)
 		    dmar_ats_supported(pdev, iommu)) {
 			info->ats_supported = 1;
 			info->dtlb_extra_inval = dev_needs_extra_dtlb_flush(pdev);
+
+			/*
+			 * For IOMMU that supports device IOTLB throttling
+			 * (DIT), we assign PFSID to the invalidation desc
+			 * of a VF such that IOMMU HW can gauge queue depth
+			 * at PF level. If DIT is not set, PFSID will be
+			 * treated as reserved, which should be set to 0.
+			 */
+			if (ecap_dit(iommu->ecap))
+				info->pfsid = pci_dev_id(pci_physfn(pdev));
+			info->ats_qdep = pci_ats_queue_depth(pdev);
 		}
 		if (sm_supported(iommu)) {
 			if (pasid_supported(iommu)) {
-- 
2.34.1