Re: [PATCH] gpio: aggregator: Add interrupt support

[kamel . bouhara]

Le 2021-10-04 14:44, Geert Uytterhoeven a écrit :

Hello,

What is the status for this patch, is there any remaining
changes to be made ?

Kind regards,
--
Kamel Bouhara, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

> Currently the GPIO Aggregator does not support interrupts.  This means
> that kernel drivers going from a GPIO to an IRQ using gpiod_to_irq(),
> and userspace applications using line events do not work.
>
> Add interrupt support by providing a gpio_chip.to_irq() callback, which
> just calls into the parent GPIO controller.
>
> Note that this does not implement full interrupt controller (irq_chip)
> support, so using e.g. gpio-keys with "interrupts" instead of "gpios"
> still does not work.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> I would prefer to avoid implementing irq_chip support, until there is a
> real use case for this.
>
> This has been tested with gpio-keys and gpiomon on the Koelsch
> development board:
>
>   - gpio-keys, using a DT overlay[1]:
>
> 	$ overlay add r8a7791-koelsch-keyboard-controlled-led
> 	$ echo gpio-aggregator > 
> /sys/devices/platform/frobnicator/driver_override
> 	$ echo frobnicator > /sys/bus/platform/drivers/gpio-aggregator/bind
>
> 	$ gpioinfo frobnicator
> 	gpiochip12 - 3 lines:
> 		line   0:      "light"      "light"  output  active-high [used]
> 		line   1:         "on"         "On"   input   active-low [used]
> 		line   2:        "off"        "Off"   input   active-low [used]
>
> 	$ echo 255 > /sys/class/leds/light/brightness
> 	$ echo 0 > /sys/class/leds/light/brightness
>
> 	$ evtest /dev/input/event0
>
>   - gpiomon, using the GPIO sysfs API:
>
> 	$ echo keyboard > /sys/bus/platform/drivers/gpio-keys/unbind
> 	$ echo e6055800.gpio 2,6 > 
> /sys/bus/platform/drivers/gpio-aggregator/new_device
> 	$ gpiomon gpiochip12 0 1
>
> [1] "ARM: dts: koelsch: Add overlay for keyboard-controlled LED"
>
> https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/commit/?h=topic/renesas-overlays&id=c78d817869e63a3485bb4ab98aeea6ce368a396e
> ---
>  drivers/gpio/gpio-aggregator.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpio/gpio-aggregator.c 
> b/drivers/gpio/gpio-aggregator.c
> index 34e35b64dcdc0581..2ff867d2a3630d3b 100644
> --- a/drivers/gpio/gpio-aggregator.c
> +++ b/drivers/gpio/gpio-aggregator.c
> @@ -374,6 +374,13 @@ static int gpio_fwd_set_config(struct gpio_chip
> *chip, unsigned int offset,
>  	return gpiod_set_config(fwd->descs[offset], config);
>  }
>
> +static int gpio_fwd_to_irq(struct gpio_chip *chip, unsigned int 
> offset)
> +{
> +	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
> +
> +	return gpiod_to_irq(fwd->descs[offset]);
> +}
> +
>  /**
>   * gpiochip_fwd_create() - Create a new GPIO forwarder
>   * @dev: Parent device pointer
> @@ -414,7 +421,8 @@ static struct gpiochip_fwd
> *gpiochip_fwd_create(struct device *dev,
>  	for (i = 0; i < ngpios; i++) {
>  		struct gpio_chip *parent = gpiod_to_chip(descs[i]);
>
> -		dev_dbg(dev, "%u => gpio-%d\n", i, desc_to_gpio(descs[i]));
> +		dev_dbg(dev, "%u => gpio %d irq %d\n", i,
> +			desc_to_gpio(descs[i]), gpiod_to_irq(descs[i]));
>
>  		if (gpiod_cansleep(descs[i]))
>  			chip->can_sleep = true;
> @@ -432,6 +440,7 @@ static struct gpiochip_fwd
> *gpiochip_fwd_create(struct device *dev,
>  	chip->get_multiple = gpio_fwd_get_multiple_locked;
>  	chip->set = gpio_fwd_set;
>  	chip->set_multiple = gpio_fwd_set_multiple_locked;
> +	chip->to_irq = gpio_fwd_to_irq;
>  	chip->base = -1;
>  	chip->ngpio = ngpios;
>  	fwd->descs = descs;