[PATCH v3 06/21] perf vendor events intel: Fix uncore topics for broadwellde

From: Ian Rogers
Date: Thu Apr 13 2023 - 09:31:46 EST

Next message: Ian Rogers: "[PATCH v3 08/21] perf vendor events intel: Fix uncore topics for cascadelakex"
Previous message: Ian Rogers: "[PATCH v3 07/21] perf vendor events intel: Fix uncore topics for broadwellx"
In reply to: Ian Rogers: "[PATCH v3 07/21] perf vendor events intel: Fix uncore topics for broadwellx"
Next in thread: Ian Rogers: "[PATCH v3 08/21] perf vendor events intel: Fix uncore topics for cascadelakex"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Remove 'uncore-other' topic classification, move to cache,
interconnect and io.

Signed-off-by: Ian Rogers <irogers@xxxxxxxxxx>
---
.../arch/x86/broadwellde/uncore-cache.json | 324 ++++-----
.../x86/broadwellde/uncore-interconnect.json | 614 ++++++++++++++++++
.../{uncore-other.json => uncore-io.json} | 612 -----------------
3 files changed, 776 insertions(+), 774 deletions(-)
create mode 100644 tools/perf/pmu-events/arch/x86/broadwellde/uncore-interconnect.json
rename tools/perf/pmu-events/arch/x86/broadwellde/{uncore-other.json => uncore-io.json} (53%)

diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
index 2bf23ef7bfac..56bba6d4e0f6 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
@@ -4,13 +4,13 @@
"EventCode": "0xA",
"EventName": "UNC_C_BOUNCE_CONTROL",
"PerPkg": "1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Uncore Clocks",
"EventName": "UNC_C_CLOCKTICKS",
"PerPkg": "1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Counter 0 Occupancy",
@@ -18,7 +18,7 @@
"EventName": "UNC_C_COUNTER0_OCCUPANCY",
"PerPkg": "1",
"PublicDescription": "Since occupancy counts can only be captured in the Cbo's 0 counter, this event allows a user to capture occupancy related information by filtering the Cb0 occupancy count captured in Counter 0. The filtering available is found in the control register - threshold, invert and edge detect. E.g. setting threshold to 1 can effectively monitor how many cycles the monitored queue has an entry.",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "FaST wire asserted",
@@ -26,7 +26,7 @@
"EventName": "UNC_C_FAST_ASSERTED",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles either the local distress or incoming distress signals are asserted. Incoming distress includes both up and dn.",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; Any Request",
@@ -35,7 +35,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Filters for any transaction originating from the IPQ or IRQ. This does not include lookups originating from the ISMQ.",
"UMask": "0x11",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; Data Read Request",
@@ -44,7 +44,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Read transactions",
"UMask": "0x3",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; Lookups that Match NID",
@@ -53,7 +53,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Qualify one of the other subevents by the Target NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x41",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; Any Read Request",
@@ -62,7 +62,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Read transactions",
"UMask": "0x21",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; External Snoop Request",
@@ -71,7 +71,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Filters for only snoop requests coming from the remote socket(s) through the IPQ.",
"UMask": "0x9",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; Write Requests",
@@ -80,7 +80,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Writeback transactions from L2 to the LLC This includes all write transactions -- both Cacheable and UC.",
"UMask": "0x5",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized; Lines in E state",
@@ -89,7 +89,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized",
@@ -98,7 +98,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized; Lines in S State",
@@ -107,7 +107,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized",
@@ -116,7 +116,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized; Lines in M state",
@@ -125,7 +125,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized; Victimized Lines that Match NID",
@@ -134,7 +134,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.; Qualify one of the other subevents by the Target NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x40",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc; DRd hitting non-M with raw CV=0",
@@ -143,7 +143,7 @@
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.",
"UMask": "0x20",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc; Clean Victim with raw CV=0",
@@ -152,7 +152,7 @@
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc; RFO HitS",
@@ -161,7 +161,7 @@
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.; Number of times that an RFO hit in S state. This is useful for determining if it might be good for a workload to use RspIWB instead of RspSWB.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc; Silent Snoop Eviction",
@@ -170,7 +170,7 @@
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.; Counts the number of times when a Snoop hit in FSE states and triggered a silent eviction. This is useful because this information is lost in the PRE encodings.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc",
@@ -179,7 +179,7 @@
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc; Write Combining Aliasing",
@@ -188,7 +188,7 @@
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.; Counts the number of times that a USWC write (WCIL(F)) transaction hit in the LLC in M state, triggering a WBMtoI followed by the USWC write. This occurs when there is WC aliasing.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; LRU Age 0",
@@ -197,7 +197,7 @@
"PerPkg": "1",
"PublicDescription": "How often age was set to 0",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; LRU Age 1",
@@ -206,7 +206,7 @@
"PerPkg": "1",
"PublicDescription": "How often age was set to 1",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; LRU Age 2",
@@ -215,7 +215,7 @@
"PerPkg": "1",
"PublicDescription": "How often age was set to 2",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; LRU Age 3",
@@ -224,7 +224,7 @@
"PerPkg": "1",
"PublicDescription": "How often age was set to 3",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; LRU Bits Decremented",
@@ -233,7 +233,7 @@
"PerPkg": "1",
"PublicDescription": "How often all LRU bits were decremented by 1",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; Non-0 Aged Victim",
@@ -242,7 +242,7 @@
"PerPkg": "1",
"PublicDescription": "How often we picked a victim that had a non-zero age",
"UMask": "0x20",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; All",
@@ -251,7 +251,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0xf",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Down",
@@ -260,7 +260,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0xc",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Up",
@@ -269,7 +269,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0x3",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Down and Even",
@@ -278,7 +278,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Down and Even ring polarity.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Down and Odd",
@@ -287,7 +287,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Down and Odd ring polarity.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Up and Even",
@@ -296,7 +296,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Up and Even ring polarity.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Up and Odd",
@@ -305,7 +305,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Up and Odd ring polarity.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; All",
@@ -314,7 +314,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0xf",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Down",
@@ -323,7 +323,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0xc",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Up",
@@ -332,7 +332,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0x3",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Down and Even",
@@ -341,7 +341,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Down and Even ring polarity.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Down and Odd",
@@ -350,7 +350,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Down and Odd ring polarity.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Up and Even",
@@ -359,7 +359,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Up and Even ring polarity.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Up and Odd",
@@ -368,7 +368,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Up and Odd ring polarity.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Down",
@@ -377,7 +377,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0xf",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Down",
@@ -386,7 +386,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0xc",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Up",
@@ -395,7 +395,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0x3",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Down and Even",
@@ -404,7 +404,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Down and Even ring polarity.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Down and Odd",
@@ -413,7 +413,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Down and Odd ring polarity.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Up and Even",
@@ -422,7 +422,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Up and Even ring polarity.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Up and Odd",
@@ -431,7 +431,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the BL ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in BDX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Up and Odd ring polarity.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.; AD",
@@ -439,7 +439,7 @@
"EventName": "UNC_C_RING_BOUNCES.AD",
"PerPkg": "1",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.; AK",
@@ -447,7 +447,7 @@
"EventName": "UNC_C_RING_BOUNCES.AK",
"PerPkg": "1",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.; BL",
@@ -455,7 +455,7 @@
"EventName": "UNC_C_RING_BOUNCES.BL",
"PerPkg": "1",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Number of LLC responses that bounced on the Ring.; Snoops of processor's cache.",
@@ -463,7 +463,7 @@
"EventName": "UNC_C_RING_BOUNCES.IV",
"PerPkg": "1",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Any",
@@ -472,7 +472,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the IV ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. There is only 1 IV ring in BDX Therefore, if one wants to monitor the Even ring, they should select both UP_EVEN and DN_EVEN. To monitor the Odd ring, they should select both UP_ODD and DN_ODD.; Filters any polarity",
"UMask": "0xf",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Any",
@@ -481,7 +481,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the IV ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. There is only 1 IV ring in BDX Therefore, if one wants to monitor the Even ring, they should select both UP_EVEN and DN_EVEN. To monitor the Odd ring, they should select both UP_ODD and DN_ODD.; Filters any polarity",
"UMask": "0xc",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Down",
@@ -490,7 +490,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the IV ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. There is only 1 IV ring in BDX Therefore, if one wants to monitor the Even ring, they should select both UP_EVEN and DN_EVEN. To monitor the Odd ring, they should select both UP_ODD and DN_ODD.; Filters for Down polarity",
"UMask": "0xcc",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL Ring in Use; Any",
@@ -499,7 +499,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the IV ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. There is only 1 IV ring in BDX Therefore, if one wants to monitor the Even ring, they should select both UP_EVEN and DN_EVEN. To monitor the Odd ring, they should select both UP_ODD and DN_ODD.; Filters any polarity",
"UMask": "0x3",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AD",
@@ -507,7 +507,7 @@
"EventName": "UNC_C_RING_SINK_STARVED.AD",
"PerPkg": "1",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "AK",
@@ -515,7 +515,7 @@
"EventName": "UNC_C_RING_SINK_STARVED.AK",
"PerPkg": "1",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BL",
@@ -523,7 +523,7 @@
"EventName": "UNC_C_RING_SINK_STARVED.BL",
"PerPkg": "1",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "IV",
@@ -531,14 +531,14 @@
"EventName": "UNC_C_RING_SINK_STARVED.IV",
"PerPkg": "1",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Number of cycles the Cbo is actively throttling traffic onto the Ring in order to limit bounce traffic.",
"EventCode": "0x7",
"EventName": "UNC_C_RING_SRC_THRTL",
"PerPkg": "1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Arbiter Blocking Cycles; IRQ",
@@ -547,7 +547,7 @@
"PerPkg": "1",
"PublicDescription": "Counts cycles in external starvation. This occurs when one of the ingress queues is being starved by the other queues.; IPQ is externally startved and therefore we are blocking the IRQ.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Arbiter Blocking Cycles; IPQ",
@@ -556,7 +556,7 @@
"PerPkg": "1",
"PublicDescription": "Counts cycles in external starvation. This occurs when one of the ingress queues is being starved by the other queues.; IRQ is externally starved and therefore we are blocking the IPQ.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Arbiter Blocking Cycles; ISMQ_BID",
@@ -565,7 +565,7 @@
"PerPkg": "1",
"PublicDescription": "Counts cycles in external starvation. This occurs when one of the ingress queues is being starved by the other queues.; Number of times that the ISMQ Bid.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Arbiter Blocking Cycles; PRQ",
@@ -574,7 +574,7 @@
"PerPkg": "1",
"PublicDescription": "Counts cycles in external starvation. This occurs when one of the ingress queues is being starved by the other queues.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Allocations; IPQ",
@@ -583,7 +583,7 @@
"PerPkg": "1",
"PublicDescription": "Counts number of allocations per cycle into the specified Ingress queue.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Allocations; IRQ",
@@ -592,7 +592,7 @@
"PerPkg": "1",
"PublicDescription": "Counts number of allocations per cycle into the specified Ingress queue.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Allocations; IRQ Rejected",
@@ -601,7 +601,7 @@
"PerPkg": "1",
"PublicDescription": "Counts number of allocations per cycle into the specified Ingress queue.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Allocations; PRQ",
@@ -610,7 +610,7 @@
"PerPkg": "1",
"PublicDescription": "Counts number of allocations per cycle into the specified Ingress queue.",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Allocations; PRQ",
@@ -619,7 +619,7 @@
"PerPkg": "1",
"PublicDescription": "Counts number of allocations per cycle into the specified Ingress queue.",
"UMask": "0x20",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Internal Starvation Cycles; IPQ",
@@ -628,7 +628,7 @@
"PerPkg": "1",
"PublicDescription": "Counts cycles in internal starvation. This occurs when one (or more) of the entries in the ingress queue are being starved out by other entries in that queue.; Cycles with the IPQ in Internal Starvation.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Internal Starvation Cycles; IRQ",
@@ -637,7 +637,7 @@
"PerPkg": "1",
"PublicDescription": "Counts cycles in internal starvation. This occurs when one (or more) of the entries in the ingress queue are being starved out by other entries in that queue.; Cycles with the IRQ in Internal Starvation.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Internal Starvation Cycles; ISMQ",
@@ -646,7 +646,7 @@
"PerPkg": "1",
"PublicDescription": "Counts cycles in internal starvation. This occurs when one (or more) of the entries in the ingress queue are being starved out by other entries in that queue.; Cycles with the ISMQ in Internal Starvation.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Internal Starvation Cycles; PRQ",
@@ -655,7 +655,7 @@
"PerPkg": "1",
"PublicDescription": "Counts cycles in internal starvation. This occurs when one (or more) of the entries in the ingress queue are being starved out by other entries in that queue.",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Probe Queue Retries; Address Conflict",
@@ -664,7 +664,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a snoop (probe) request had to retry. Filters exist to cover some of the common cases retries.; Counts the number of times that a request form the IPQ was retried because of a TOR reject from an address conflicts. Address conflicts out of the IPQ should be rare. They will generally only occur if two different sockets are sending requests to the same address at the same time. This is a true conflict case, unlike the IPQ Address Conflict which is commonly caused by prefetching characteristics.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Probe Queue Retries; Any Reject",
@@ -673,7 +673,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a snoop (probe) request had to retry. Filters exist to cover some of the common cases retries.; Counts the number of times that a request form the IPQ was retried because of a TOR reject. TOR rejects from the IPQ can be caused by the Egress being full or Address Conflicts.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Probe Queue Retries; No Egress Credits",
@@ -682,7 +682,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a snoop (probe) request had to retry. Filters exist to cover some of the common cases retries.; Counts the number of times that a request form the IPQ was retried because of a TOR reject from the Egress being full. IPQ requests make use of the AD Egress for regular responses, the BL egress to forward data, and the AK egress to return credits.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Probe Queue Retries; No QPI Credits",
@@ -691,7 +691,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a snoop (probe) request had to retry. Filters exist to cover some of the common cases retries.",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Probe Queue Retries; No AD Sbo Credits",
@@ -700,7 +700,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a snoop (probe) request had to retry. Filters exist to cover some of the common cases retries.; Counts the number of times that a request from the IPQ was retried because of it lacked credits to send an AD packet to the Sbo.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Probe Queue Retries; Target Node Filter",
@@ -709,7 +709,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a snoop (probe) request had to retry. Filters exist to cover some of the common cases retries.; Counts the number of times that a request from the IPQ was retried filtered by the Target NodeID as specified in the Cbox's Filter register.",
"UMask": "0x40",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Request Queue Rejects; Address Conflict",
@@ -718,7 +718,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times that a request from the IRQ was retried because of an address match in the TOR. In order to maintain coherency, requests to the same address are not allowed to pass each other up in the Cbo. Therefore, if there is an outstanding request to a given address, one cannot issue another request to that address until it is complete. This comes up most commonly with prefetches. Outstanding prefetches occasionally will not complete their memory fetch and a demand request to the same address will then sit in the IRQ and get retried until the prefetch fills the data into the LLC. Therefore, it will not be uncommon to see this case in high bandwidth streaming workloads when the LLC Prefetcher in the core is enabled.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Request Queue Rejects; Any Reject",
@@ -727,7 +727,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of IRQ retries that occur. Requests from the IRQ are retried if they are rejected from the TOR pipeline for a variety of reasons. Some of the most common reasons include if the Egress is full, there are no RTIDs, or there is a Physical Address match to another outstanding request.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Request Queue Rejects; No Egress Credits",
@@ -736,7 +736,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times that a request from the IRQ was retried because it failed to acquire an entry in the Egress. The egress is the buffer that queues up for allocating onto the ring. IRQ requests can make use of all four rings and all four Egresses. If any of the queues that a given request needs to make use of are full, the request will be retried.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Request Queue Rejects; No IIO Credits",
@@ -745,7 +745,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a request attempted to acquire the NCS/NCB credit for sending messages on BL to the IIO. There is a single credit in each CBo that is shared between the NCS and NCB message classes for sending transactions on the BL ring (such as read data) to the IIO.",
"UMask": "0x20",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Request Queue Rejects",
@@ -754,7 +754,7 @@
"PerPkg": "1",
"PublicDescription": "Qualify one of the other subevents by a given RTID destination NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER1.nid.",
"UMask": "0x40",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Request Queue Rejects; No QPI Credits",
@@ -763,7 +763,7 @@
"PerPkg": "1",
"PublicDescription": "Number of requests rejects because of lack of QPI Ingress credits. These credits are required in order to send transactions to the QPI agent. Please see the QPI_IGR_CREDITS events for more information.",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Request Queue Rejects; No RTIDs",
@@ -772,7 +772,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times that requests from the IRQ were retried because there were no RTIDs available. RTIDs are required after a request misses the LLC and needs to send snoops and/or requests to memory. If there are no RTIDs available, requests will queue up in the IRQ and retry until one becomes available. Note that there are multiple RTID pools for the different sockets. There may be cases where the local RTIDs are all used, but requests destined for remote memory can still acquire an RTID because there are remote RTIDs available. This event does not provide any filtering for this case.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Request Queue Rejects; No AD Sbo Credits",
@@ -781,7 +781,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times that a request from the IPQ was retried because of it lacked credits to send an AD packet to the Sbo.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Request Queue Rejects; No BL Sbo Credits",
@@ -790,7 +790,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times that a request from the IPQ was retried because of it lacked credits to send an BL packet to the Sbo.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Request Queue Rejects; Target Node Filter",
@@ -799,7 +799,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times that a request from the IPQ was retried filtered by the Target NodeID as specified in the Cbox's Filter register.",
"UMask": "0x40",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "ISMQ Retries; Any Reject",
@@ -808,7 +808,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a transaction flowing through the ISMQ had to retry. Transaction pass through the ISMQ as responses for requests that already exist in the Cbo. Some examples include: when data is returned or when snoop responses come back from the cores.; Counts the total number of times that a request from the ISMQ retried because of a TOR reject. ISMQ requests generally will not need to retry (or at least ISMQ retries are less common than IRQ retries). ISMQ requests will retry if they are not able to acquire a needed Egress credit to get onto the ring, or for cache evictions that need to acquire an RTID. Most ISMQ requests already have an RTID, so eviction retries will be less common here.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "ISMQ Retries; No Egress Credits",
@@ -817,7 +817,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a transaction flowing through the ISMQ had to retry. Transaction pass through the ISMQ as responses for requests that already exist in the Cbo. Some examples include: when data is returned or when snoop responses come back from the cores.; Counts the number of times that a request from the ISMQ retried because of a TOR reject caused by a lack of Egress credits. The egress is the buffer that queues up for allocating onto the ring. If any of the Egress queues that a given request needs to make use of are full, the request will be retried.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "ISMQ Retries; No IIO Credits",
@@ -826,7 +826,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a transaction flowing through the ISMQ had to retry. Transaction pass through the ISMQ as responses for requests that already exist in the Cbo. Some examples include: when data is returned or when snoop responses come back from the cores.; Number of times a request attempted to acquire the NCS/NCB credit for sending messages on BL to the IIO. There is a single credit in each CBo that is shared between the NCS and NCB message classes for sending transactions on the BL ring (such as read data) to the IIO.",
"UMask": "0x20",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "ISMQ Retries",
@@ -835,7 +835,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a transaction flowing through the ISMQ had to retry. Transaction pass through the ISMQ as responses for requests that already exist in the Cbo. Some examples include: when data is returned or when snoop responses come back from the cores.; Qualify one of the other subevents by a given RTID destination NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER1.nid.",
"UMask": "0x40",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "ISMQ Retries; No QPI Credits",
@@ -844,7 +844,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a transaction flowing through the ISMQ had to retry. Transaction pass through the ISMQ as responses for requests that already exist in the Cbo. Some examples include: when data is returned or when snoop responses come back from the cores.",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "ISMQ Retries; No RTIDs",
@@ -853,7 +853,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a transaction flowing through the ISMQ had to retry. Transaction pass through the ISMQ as responses for requests that already exist in the Cbo. Some examples include: when data is returned or when snoop responses come back from the cores.; Counts the number of times that a request from the ISMQ retried because of a TOR reject caused by no RTIDs. M-state cache evictions are serviced through the ISMQ, and must acquire an RTID in order to write back to memory. If no RTIDs are available, they will be retried.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "ISMQ Retries",
@@ -862,7 +862,7 @@
"PerPkg": "1",
"PublicDescription": "Number of times a transaction flowing through the ISMQ had to retry. Transaction pass through the ISMQ as responses for requests that already exist in the Cbo. Some examples include: when data is returned or when snoop responses come back from the cores.; Qualify one of the other subevents by a given RTID destination NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER1.nid.",
"UMask": "0x80",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "ISMQ Request Queue Rejects; No AD Sbo Credits",
@@ -871,7 +871,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times that a request from the ISMQ was retried because of it lacked credits to send an AD packet to the Sbo.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "ISMQ Request Queue Rejects; No BL Sbo Credits",
@@ -880,7 +880,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times that a request from the ISMQ was retried because of it lacked credits to send an BL packet to the Sbo.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "ISMQ Request Queue Rejects; Target Node Filter",
@@ -889,7 +889,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of times that a request from the ISMQ was retried filtered by the Target NodeID as specified in the Cbox's Filter register.",
"UMask": "0x40",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Occupancy; IPQ",
@@ -898,7 +898,7 @@
"PerPkg": "1",
"PublicDescription": "Counts number of entries in the specified Ingress queue in each cycle.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Occupancy; IRQ",
@@ -907,7 +907,7 @@
"PerPkg": "1",
"PublicDescription": "Counts number of entries in the specified Ingress queue in each cycle.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Occupancy; IRQ Rejected",
@@ -916,7 +916,7 @@
"PerPkg": "1",
"PublicDescription": "Counts number of entries in the specified Ingress queue in each cycle.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Ingress Occupancy; PRQ Rejects",
@@ -925,7 +925,7 @@
"PerPkg": "1",
"PublicDescription": "Counts number of entries in the specified Ingress queue in each cycle.",
"UMask": "0x20",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "SBo Credits Acquired; For AD Ring",
@@ -934,7 +934,7 @@
"PerPkg": "1",
"PublicDescription": "Number of Sbo credits acquired in a given cycle, per ring. Each Cbo is assigned an Sbo it can communicate with.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "SBo Credits Acquired; For BL Ring",
@@ -943,7 +943,7 @@
"PerPkg": "1",
"PublicDescription": "Number of Sbo credits acquired in a given cycle, per ring. Each Cbo is assigned an Sbo it can communicate with.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "SBo Credits Occupancy; For AD Ring",
@@ -952,7 +952,7 @@
"PerPkg": "1",
"PublicDescription": "Number of Sbo credits in use in a given cycle, per ring. Each Cbo is assigned an Sbo it can communicate with.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "SBo Credits Occupancy; For BL Ring",
@@ -961,7 +961,7 @@
"PerPkg": "1",
"PublicDescription": "Number of Sbo credits in use in a given cycle, per ring. Each Cbo is assigned an Sbo it can communicate with.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; All",
@@ -970,7 +970,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR. This includes requests that reside in the TOR for a short time, such as LLC Hits that do not need to snoop cores or requests that get rejected and have to be retried through one of the ingress queues. The TOR is more commonly a bottleneck in skews with smaller core counts, where the ratio of RTIDs to TOR entries is larger. Note that there are reserved TOR entries for various request types, so it is possible that a given request type be blocked with an occupancy that is less than 20. Also note that generally requests will not be able to arbitrate into the TOR pipeline if there are no available TOR slots.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Evictions",
@@ -979,7 +979,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Eviction transactions inserted into the TOR. Evictions can be quick, such as when the line is in the F, S, or E states and no core valid bits are set. They can also be longer if either CV bits are set (so the cores need to be snooped) and/or if there is a HitM (in which case it is necessary to write the request out to memory).",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Local Memory",
@@ -988,7 +988,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x28",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Local Memory - Opcode Matched",
@@ -997,7 +997,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisfied by an opcode, inserted into the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x21",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Misses to Local Memory",
@@ -1006,7 +1006,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x2a",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Misses to Local Memory - Opcode Matched",
@@ -1015,7 +1015,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisfied by an opcode, inserted into the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x23",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Miss Opcode Match",
@@ -1024,7 +1024,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"UMask": "0x3",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Misses to Remote Memory",
@@ -1033,7 +1033,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x8a",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Misses to Remote Memory - Opcode Matched",
@@ -1042,7 +1042,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisfied by an opcode, inserted into the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x83",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; NID Matched",
@@ -1051,7 +1051,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched (matches an RTID destination) transactions inserted into the TOR. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x48",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; NID Matched Evictions",
@@ -1060,7 +1060,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched eviction transactions inserted into the TOR.",
"UMask": "0x44",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; NID Matched Miss All",
@@ -1069,7 +1069,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched miss requests that were inserted into the TOR.",
"UMask": "0x4a",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; NID and Opcode Matched Miss",
@@ -1078,7 +1078,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match a NID and an opcode.",
"UMask": "0x43",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; NID and Opcode Matched",
@@ -1087,7 +1087,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match a NID and an opcode.",
"UMask": "0x41",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; NID Matched Writebacks",
@@ -1096,7 +1096,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched write transactions inserted into the TOR.",
"UMask": "0x50",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Opcode Match",
@@ -1105,7 +1105,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Remote Memory",
@@ -1114,7 +1114,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x88",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Remote Memory - Opcode Matched",
@@ -1123,7 +1123,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisfied by an opcode, inserted into the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x81",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Inserts; Writebacks",
@@ -1132,7 +1132,7 @@
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Write transactions inserted into the TOR. This does not include RFO, but actual operations that contain data being sent from the core.",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; Any",
@@ -1141,7 +1141,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); All valid TOR entries. This includes requests that reside in the TOR for a short time, such as LLC Hits that do not need to snoop cores or requests that get rejected and have to be retried through one of the ingress queues. The TOR is more commonly a bottleneck in skews with smaller core counts, where the ratio of RTIDs to TOR entries is larger. Note that there are reserved TOR entries for various request types, so it is possible that a given request type be blocked with an occupancy that is less than 20. Also note that generally requests will not be able to arbitrate into the TOR pipeline if there are no available TOR slots.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; Evictions",
@@ -1150,7 +1150,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding eviction transactions in the TOR. Evictions can be quick, such as when the line is in the F, S, or E states and no core valid bits are set. They can also be longer if either CV bits are set (so the cores need to be snooped) and/or if there is a HitM (in which case it is necessary to write the request out to memory).",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy",
@@ -1159,7 +1159,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x28",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; Local Memory - Opcode Matched",
@@ -1168,7 +1168,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisfied by an opcode, in the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x21",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; Miss All",
@@ -1177,7 +1177,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding miss requests in the TOR. 'Miss' means the allocation requires an RTID. This generally means that the request was sent to memory or MMIO.",
"UMask": "0xa",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy",
@@ -1186,7 +1186,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x2a",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; Misses to Local Memory - Opcode Matched",
@@ -1195,7 +1195,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisfied by an opcode, in the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x23",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; Miss Opcode Match",
@@ -1204,7 +1204,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); TOR entries for miss transactions that match an opcode. This generally means that the request was sent to memory or MMIO.",
"UMask": "0x3",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy",
@@ -1213,7 +1213,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x8a",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; Misses to Remote Memory - Opcode Matched",
@@ -1222,7 +1222,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisfied by an opcode, in the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x83",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; NID Matched",
@@ -1231,7 +1231,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of NID matched outstanding requests in the TOR. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid.In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x48",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; NID Matched Evictions",
@@ -1240,7 +1240,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding NID matched eviction transactions in the TOR .",
"UMask": "0x44",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; NID Matched",
@@ -1249,7 +1249,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss requests in the TOR that match a NID.",
"UMask": "0x4a",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; NID and Opcode Matched Miss",
@@ -1258,7 +1258,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss requests in the TOR that match a NID and an opcode.",
"UMask": "0x43",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; NID and Opcode Matched",
@@ -1267,7 +1267,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); TOR entries that match a NID and an opcode.",
"UMask": "0x41",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; NID Matched Writebacks",
@@ -1276,7 +1276,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); NID matched write transactions int the TOR.",
"UMask": "0x50",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; Opcode Match",
@@ -1285,7 +1285,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); TOR entries that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc).",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy",
@@ -1294,7 +1294,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182)",
"UMask": "0x88",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; Remote Memory - Opcode Matched",
@@ -1303,7 +1303,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisfied by an opcode, in the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x81",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "TOR Occupancy; Writebacks",
@@ -1312,7 +1312,7 @@
"PerPkg": "1",
"PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Write transactions in the TOR. This does not include RFO, but actual operations that contain data being sent from the core.",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Onto AD Ring",
@@ -1320,7 +1320,7 @@
"EventName": "UNC_C_TxR_ADS_USED.AD",
"PerPkg": "1",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Onto AK Ring",
@@ -1328,7 +1328,7 @@
"EventName": "UNC_C_TxR_ADS_USED.AK",
"PerPkg": "1",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Onto BL Ring",
@@ -1336,7 +1336,7 @@
"EventName": "UNC_C_TxR_ADS_USED.BL",
"PerPkg": "1",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Egress Allocations; AD - Cachebo",
@@ -1345,7 +1345,7 @@
"PerPkg": "1",
"PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Cachebo destined for the AD ring. Some example include outbound requests, snoop requests, and snoop responses.",
"UMask": "0x1",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Egress Allocations; AD - Corebo",
@@ -1354,7 +1354,7 @@
"PerPkg": "1",
"PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Corebo destined for the AD ring. This is commonly used for outbound requests.",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Egress Allocations; AK - Cachebo",
@@ -1363,7 +1363,7 @@
"PerPkg": "1",
"PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Cachebo destined for the AK ring. This is commonly used for credit returns and GO responses.",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Egress Allocations; AK - Corebo",
@@ -1372,7 +1372,7 @@
"PerPkg": "1",
"PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Corebo destined for the AK ring. This is commonly used for snoop responses coming from the core and destined for a Cachebo.",
"UMask": "0x20",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Egress Allocations; BL - Cacheno",
@@ -1381,7 +1381,7 @@
"PerPkg": "1",
"PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Cachebo destined for the BL ring. This is commonly used to send data from the cache to various destinations.",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Egress Allocations; BL - Corebo",
@@ -1390,7 +1390,7 @@
"PerPkg": "1",
"PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Corebo destined for the BL ring. This is commonly used for transferring writeback data to the cache.",
"UMask": "0x40",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Egress Allocations; IV - Cachebo",
@@ -1399,7 +1399,7 @@
"PerPkg": "1",
"PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Cachebo destined for the IV ring. This is commonly used for snoops to the cores.",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Injection Starvation; Onto AD Ring (to core)",
@@ -1408,7 +1408,7 @@
"PerPkg": "1",
"PublicDescription": "Counts injection starvation. This starvation is triggered when the Egress cannot send a transaction onto the ring for a long period of time.; cycles that the core AD egress spent in starvation",
"UMask": "0x10",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Injection Starvation; Onto AK Ring",
@@ -1417,7 +1417,7 @@
"PerPkg": "1",
"PublicDescription": "Counts injection starvation. This starvation is triggered when the Egress cannot send a transaction onto the ring for a long period of time.; cycles that both AK egresses spent in starvation",
"UMask": "0x2",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Injection Starvation; Onto BL Ring",
@@ -1426,7 +1426,7 @@
"PerPkg": "1",
"PublicDescription": "Counts injection starvation. This starvation is triggered when the Egress cannot send a transaction onto the ring for a long period of time.; cycles that both BL egresses spent in starvation",
"UMask": "0x4",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "Injection Starvation; Onto IV Ring",
@@ -1435,7 +1435,7 @@
"PerPkg": "1",
"PublicDescription": "Counts injection starvation. This starvation is triggered when the Egress cannot send a transaction onto the ring for a long period of time.; cycles that the cachebo IV egress spent in starvation",
"UMask": "0x8",
- "Unit": "CBO"
+ "Unit": "CBOX"
},
{
"BriefDescription": "BT Cycles Not Empty",
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-interconnect.json
new file mode 100644
index 000000000000..8a327e0f1441
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-interconnect.json
@@ -0,0 +1,614 @@
+[
+ {
+ "BriefDescription": "Total Write Cache Occupancy; Any Source",
+ "EventCode": "0x12",
+ "EventName": "UNC_I_CACHE_TOTAL_OCCUPANCY.ANY",
+ "PerPkg": "1",
+ "PublicDescription": "Accumulates the number of reads and writes that are outstanding in the uncore in each cycle. This is effectively the sum of the READ_OCCUPANCY and WRITE_OCCUPANCY events.; Tracks all requests from any source port.",
+ "UMask": "0x1",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Total Write Cache Occupancy; Select Source",
+ "EventCode": "0x12",
+ "EventName": "UNC_I_CACHE_TOTAL_OCCUPANCY.SOURCE",
+ "PerPkg": "1",
+ "PublicDescription": "Accumulates the number of reads and writes that are outstanding in the uncore in each cycle. This is effectively the sum of the READ_OCCUPANCY and WRITE_OCCUPANCY events.; Tracks only those requests that come from the port specified in the IRP_PmonFilter.OrderingQ register. This register allows one to select one specific queue. It is not possible to monitor multiple queues at a time.",
+ "UMask": "0x2",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Clocks in the IRP",
+ "EventName": "UNC_I_CLOCKTICKS",
+ "PerPkg": "1",
+ "PublicDescription": "Number of clocks in the IRP.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Coherent Ops; CLFlush",
+ "EventCode": "0x13",
+ "EventName": "UNC_I_COHERENT_OPS.CLFLUSH",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
+ "UMask": "0x80",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Coherent Ops; CRd",
+ "EventCode": "0x13",
+ "EventName": "UNC_I_COHERENT_OPS.CRD",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
+ "UMask": "0x2",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Coherent Ops; DRd",
+ "EventCode": "0x13",
+ "EventName": "UNC_I_COHERENT_OPS.DRD",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
+ "UMask": "0x4",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Coherent Ops; PCIDCAHin5t",
+ "EventCode": "0x13",
+ "EventName": "UNC_I_COHERENT_OPS.PCIDCAHINT",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
+ "UMask": "0x20",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Coherent Ops; PCIRdCur",
+ "EventCode": "0x13",
+ "EventName": "UNC_I_COHERENT_OPS.PCIRDCUR",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
+ "UMask": "0x1",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Coherent Ops; PCIItoM",
+ "EventCode": "0x13",
+ "EventName": "UNC_I_COHERENT_OPS.PCITOM",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
+ "UMask": "0x10",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Coherent Ops; RFO",
+ "EventCode": "0x13",
+ "EventName": "UNC_I_COHERENT_OPS.RFO",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
+ "UMask": "0x8",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Coherent Ops; WbMtoI",
+ "EventCode": "0x13",
+ "EventName": "UNC_I_COHERENT_OPS.WBMTOI",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
+ "UMask": "0x40",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 0; Cache Inserts of Atomic Transactions as Secondary",
+ "EventCode": "0x14",
+ "EventName": "UNC_I_MISC0.2ND_ATOMIC_INSERT",
+ "PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Cache Inserts of Atomic Transactions as Secondary",
+ "UMask": "0x10",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 0; Cache Inserts of Read Transactions as Secondary",
+ "EventCode": "0x14",
+ "EventName": "UNC_I_MISC0.2ND_RD_INSERT",
+ "PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Cache Inserts of Read Transactions as Secondary",
+ "UMask": "0x4",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 0; Cache Inserts of Write Transactions as Secondary",
+ "EventCode": "0x14",
+ "EventName": "UNC_I_MISC0.2ND_WR_INSERT",
+ "PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Cache Inserts of Write Transactions as Secondary",
+ "UMask": "0x8",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 0; Fastpath Rejects",
+ "EventCode": "0x14",
+ "EventName": "UNC_I_MISC0.FAST_REJ",
+ "PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Fastpath Rejects",
+ "UMask": "0x2",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 0; Fastpath Requests",
+ "EventCode": "0x14",
+ "EventName": "UNC_I_MISC0.FAST_REQ",
+ "PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Fastpath Requests",
+ "UMask": "0x1",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 0; Fastpath Transfers From Primary to Secondary",
+ "EventCode": "0x14",
+ "EventName": "UNC_I_MISC0.FAST_XFER",
+ "PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Fastpath Transfers From Primary to Secondary",
+ "UMask": "0x20",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 0; Prefetch Ack Hints From Primary to Secondary",
+ "EventCode": "0x14",
+ "EventName": "UNC_I_MISC0.PF_ACK_HINT",
+ "PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Prefetch Ack Hints From Primary to Secondary",
+ "UMask": "0x40",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 0; Prefetch TimeOut",
+ "EventCode": "0x14",
+ "EventName": "UNC_I_MISC0.PF_TIMEOUT",
+ "PerPkg": "1",
+ "PublicDescription": "Indicates the fetch for a previous prefetch wasn't accepted by the prefetch. This happens in the case of a prefetch TimeOut",
+ "UMask": "0x80",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 1; Data Throttled",
+ "EventCode": "0x15",
+ "EventName": "UNC_I_MISC1.DATA_THROTTLE",
+ "PerPkg": "1",
+ "PublicDescription": "IRP throttled switch data",
+ "UMask": "0x80",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 1",
+ "EventCode": "0x15",
+ "EventName": "UNC_I_MISC1.LOST_FWD",
+ "PerPkg": "1",
+ "PublicDescription": "Misc Events - Set 1 : Lost Forward : Snoop pulled away ownership before a write was committed",
+ "UMask": "0x10",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 1; Received Invalid",
+ "EventCode": "0x15",
+ "EventName": "UNC_I_MISC1.SEC_RCVD_INVLD",
+ "PerPkg": "1",
+ "PublicDescription": "Secondary received a transfer that did not have sufficient MESI state",
+ "UMask": "0x20",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 1; Received Valid",
+ "EventCode": "0x15",
+ "EventName": "UNC_I_MISC1.SEC_RCVD_VLD",
+ "PerPkg": "1",
+ "PublicDescription": "Secondary received a transfer that did have sufficient MESI state",
+ "UMask": "0x40",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 1; Slow Transfer of E Line",
+ "EventCode": "0x15",
+ "EventName": "UNC_I_MISC1.SLOW_E",
+ "PerPkg": "1",
+ "PublicDescription": "Secondary received a transfer that did have sufficient MESI state",
+ "UMask": "0x4",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 1; Slow Transfer of I Line",
+ "EventCode": "0x15",
+ "EventName": "UNC_I_MISC1.SLOW_I",
+ "PerPkg": "1",
+ "PublicDescription": "Snoop took cacheline ownership before write from data was committed.",
+ "UMask": "0x1",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 1; Slow Transfer of M Line",
+ "EventCode": "0x15",
+ "EventName": "UNC_I_MISC1.SLOW_M",
+ "PerPkg": "1",
+ "PublicDescription": "Snoop took cacheline ownership before write from data was committed.",
+ "UMask": "0x8",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Misc Events - Set 1; Slow Transfer of S Line",
+ "EventCode": "0x15",
+ "EventName": "UNC_I_MISC1.SLOW_S",
+ "PerPkg": "1",
+ "PublicDescription": "Secondary received a transfer that did not have sufficient MESI state",
+ "UMask": "0x2",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "AK Ingress Occupancy",
+ "EventCode": "0xA",
+ "EventName": "UNC_I_RxR_AK_INSERTS",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of allocations into the AK Ingress. This queue is where the IRP receives responses from R2PCIe (the ring).",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
+ "EventCode": "0x4",
+ "EventName": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "BL Ingress Occupancy - DRS",
+ "EventCode": "0x1",
+ "EventName": "UNC_I_RxR_BL_DRS_INSERTS",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "UNC_I_RxR_BL_DRS_OCCUPANCY",
+ "EventCode": "0x7",
+ "EventName": "UNC_I_RxR_BL_DRS_OCCUPANCY",
+ "PerPkg": "1",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
+ "EventCode": "0x5",
+ "EventName": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "BL Ingress Occupancy - NCB",
+ "EventCode": "0x2",
+ "EventName": "UNC_I_RxR_BL_NCB_INSERTS",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "UNC_I_RxR_BL_NCB_OCCUPANCY",
+ "EventCode": "0x8",
+ "EventName": "UNC_I_RxR_BL_NCB_OCCUPANCY",
+ "PerPkg": "1",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
+ "EventCode": "0x6",
+ "EventName": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "BL Ingress Occupancy - NCS",
+ "EventCode": "0x3",
+ "EventName": "UNC_I_RxR_BL_NCS_INSERTS",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "UNC_I_RxR_BL_NCS_OCCUPANCY",
+ "EventCode": "0x9",
+ "EventName": "UNC_I_RxR_BL_NCS_OCCUPANCY",
+ "PerPkg": "1",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Snoop Responses; Hit E or S",
+ "EventCode": "0x17",
+ "EventName": "UNC_I_SNOOP_RESP.HIT_ES",
+ "PerPkg": "1",
+ "PublicDescription": "Snoop Responses : Hit E or S",
+ "UMask": "0x4",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Snoop Responses; Hit I",
+ "EventCode": "0x17",
+ "EventName": "UNC_I_SNOOP_RESP.HIT_I",
+ "PerPkg": "1",
+ "PublicDescription": "Snoop Responses : Hit I",
+ "UMask": "0x2",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Snoop Responses; Hit M",
+ "EventCode": "0x17",
+ "EventName": "UNC_I_SNOOP_RESP.HIT_M",
+ "PerPkg": "1",
+ "PublicDescription": "Snoop Responses : Hit M",
+ "UMask": "0x8",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Snoop Responses; Miss",
+ "EventCode": "0x17",
+ "EventName": "UNC_I_SNOOP_RESP.MISS",
+ "PerPkg": "1",
+ "PublicDescription": "Snoop Responses : Miss",
+ "UMask": "0x1",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Snoop Responses; SnpCode",
+ "EventCode": "0x17",
+ "EventName": "UNC_I_SNOOP_RESP.SNPCODE",
+ "PerPkg": "1",
+ "PublicDescription": "Snoop Responses : SnpCode",
+ "UMask": "0x10",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Snoop Responses; SnpData",
+ "EventCode": "0x17",
+ "EventName": "UNC_I_SNOOP_RESP.SNPDATA",
+ "PerPkg": "1",
+ "PublicDescription": "Snoop Responses : SnpData",
+ "UMask": "0x20",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Snoop Responses; SnpInv",
+ "EventCode": "0x17",
+ "EventName": "UNC_I_SNOOP_RESP.SNPINV",
+ "PerPkg": "1",
+ "PublicDescription": "Snoop Responses : SnpInv",
+ "UMask": "0x40",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Inbound Transaction Count; Atomic",
+ "EventCode": "0x16",
+ "EventName": "UNC_I_TRANSACTIONS.ATOMIC",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks the number of atomic transactions",
+ "UMask": "0x10",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Inbound Transaction Count; Other",
+ "EventCode": "0x16",
+ "EventName": "UNC_I_TRANSACTIONS.OTHER",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks the number of 'other' kinds of transactions.",
+ "UMask": "0x20",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Inbound Transaction Count; Read Prefetches",
+ "EventCode": "0x16",
+ "EventName": "UNC_I_TRANSACTIONS.RD_PREF",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks the number of read prefetches.",
+ "UMask": "0x4",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Inbound Transaction Count; Reads",
+ "EventCode": "0x16",
+ "EventName": "UNC_I_TRANSACTIONS.READS",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks only read requests (not including read prefetches).",
+ "UMask": "0x1",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Inbound Transaction Count; Writes",
+ "EventCode": "0x16",
+ "EventName": "UNC_I_TRANSACTIONS.WRITES",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks only write requests. Each write request should have a prefetch, so there is no need to explicitly track these requests.",
+ "UMask": "0x2",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Inbound Transaction Count; Write Prefetches",
+ "EventCode": "0x16",
+ "EventName": "UNC_I_TRANSACTIONS.WR_PREF",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks the number of write prefetches.",
+ "UMask": "0x8",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "No AD Egress Credit Stalls",
+ "EventCode": "0x18",
+ "EventName": "UNC_I_TxR_AD_STALL_CREDIT_CYCLES",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number times when it is not possible to issue a request to the R2PCIe because there are no AD Egress Credits available.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "No BL Egress Credit Stalls",
+ "EventCode": "0x19",
+ "EventName": "UNC_I_TxR_BL_STALL_CREDIT_CYCLES",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number times when it is not possible to issue data to the R2PCIe because there are no BL Egress Credits available.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Outbound Read Requests",
+ "EventCode": "0xE",
+ "EventName": "UNC_I_TxR_DATA_INSERTS_NCB",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of requests issued to the switch (towards the devices).",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Outbound Read Requests",
+ "EventCode": "0xF",
+ "EventName": "UNC_I_TxR_DATA_INSERTS_NCS",
+ "PerPkg": "1",
+ "PublicDescription": "Counts the number of requests issued to the switch (towards the devices).",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "Outbound Request Queue Occupancy",
+ "EventCode": "0xD",
+ "EventName": "UNC_I_TxR_REQUEST_OCCUPANCY",
+ "PerPkg": "1",
+ "PublicDescription": "Accumulates the number of outstanding outbound requests from the IRP to the switch (towards the devices). This can be used in conjunction with the allocations event in order to calculate average latency of outbound requests.",
+ "Unit": "IRP"
+ },
+ {
+ "BriefDescription": "VLW Received",
+ "EventCode": "0x42",
+ "EventName": "UNC_U_EVENT_MSG.DOORBELL_RCVD",
+ "PerPkg": "1",
+ "PublicDescription": "Virtual Logical Wire (legacy) message were received from Uncore. Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
+ "UMask": "0x8",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Filter Match",
+ "EventCode": "0x41",
+ "EventName": "UNC_U_FILTER_MATCH.DISABLE",
+ "PerPkg": "1",
+ "PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
+ "UMask": "0x2",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Filter Match",
+ "EventCode": "0x41",
+ "EventName": "UNC_U_FILTER_MATCH.ENABLE",
+ "PerPkg": "1",
+ "PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
+ "UMask": "0x1",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Filter Match",
+ "EventCode": "0x41",
+ "EventName": "UNC_U_FILTER_MATCH.U2C_DISABLE",
+ "PerPkg": "1",
+ "PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
+ "UMask": "0x8",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Filter Match",
+ "EventCode": "0x41",
+ "EventName": "UNC_U_FILTER_MATCH.U2C_ENABLE",
+ "PerPkg": "1",
+ "PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
+ "UMask": "0x4",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Cycles PHOLD Assert to Ack; Assert to ACK",
+ "EventCode": "0x45",
+ "EventName": "UNC_U_PHOLD_CYCLES.ASSERT_TO_ACK",
+ "PerPkg": "1",
+ "PublicDescription": "PHOLD cycles. Filter from source CoreID.",
+ "UMask": "0x1",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "RACU Request",
+ "EventCode": "0x46",
+ "EventName": "UNC_U_RACU_REQUESTS",
+ "PerPkg": "1",
+ "PublicDescription": "Number outstanding register requests within message channel tracker",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Monitor Sent to T0; Correctable Machine Check",
+ "EventCode": "0x43",
+ "EventName": "UNC_U_U2C_EVENTS.CMC",
+ "PerPkg": "1",
+ "PublicDescription": "Events coming from Uncore can be sent to one or all cores",
+ "UMask": "0x10",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Monitor Sent to T0; Livelock",
+ "EventCode": "0x43",
+ "EventName": "UNC_U_U2C_EVENTS.LIVELOCK",
+ "PerPkg": "1",
+ "PublicDescription": "Events coming from Uncore can be sent to one or all cores; Filter by core",
+ "UMask": "0x4",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Monitor Sent to T0; LTError",
+ "EventCode": "0x43",
+ "EventName": "UNC_U_U2C_EVENTS.LTERROR",
+ "PerPkg": "1",
+ "PublicDescription": "Events coming from Uncore can be sent to one or all cores; Filter by core",
+ "UMask": "0x8",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Monitor Sent to T0; Monitor T0",
+ "EventCode": "0x43",
+ "EventName": "UNC_U_U2C_EVENTS.MONITOR_T0",
+ "PerPkg": "1",
+ "PublicDescription": "Events coming from Uncore can be sent to one or all cores; Filter by core",
+ "UMask": "0x1",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Monitor Sent to T0; Monitor T1",
+ "EventCode": "0x43",
+ "EventName": "UNC_U_U2C_EVENTS.MONITOR_T1",
+ "PerPkg": "1",
+ "PublicDescription": "Events coming from Uncore can be sent to one or all cores; Filter by core",
+ "UMask": "0x2",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Monitor Sent to T0; Other",
+ "EventCode": "0x43",
+ "EventName": "UNC_U_U2C_EVENTS.OTHER",
+ "PerPkg": "1",
+ "PublicDescription": "Events coming from Uncore can be sent to one or all cores; PREQ, PSMI, P2U, Thermal, PCUSMI, PMI",
+ "UMask": "0x80",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Monitor Sent to T0; Trap",
+ "EventCode": "0x43",
+ "EventName": "UNC_U_U2C_EVENTS.TRAP",
+ "PerPkg": "1",
+ "PublicDescription": "Events coming from Uncore can be sent to one or all cores",
+ "UMask": "0x40",
+ "Unit": "UBOX"
+ },
+ {
+ "BriefDescription": "Monitor Sent to T0; Uncorrectable Machine Check",
+ "EventCode": "0x43",
+ "EventName": "UNC_U_U2C_EVENTS.UMC",
+ "PerPkg": "1",
+ "PublicDescription": "Events coming from Uncore can be sent to one or all cores",
+ "UMask": "0x20",
+ "Unit": "UBOX"
+ }
+]
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-io.json
similarity index 53%
rename from tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json
rename to tools/perf/pmu-events/arch/x86/broadwellde/uncore-io.json
index fea3dea67f38..01e04daf03da 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-io.json
@@ -1,482 +1,4 @@
[
- {
- "BriefDescription": "Total Write Cache Occupancy; Any Source",
- "EventCode": "0x12",
- "EventName": "UNC_I_CACHE_TOTAL_OCCUPANCY.ANY",
- "PerPkg": "1",
- "PublicDescription": "Accumulates the number of reads and writes that are outstanding in the uncore in each cycle. This is effectively the sum of the READ_OCCUPANCY and WRITE_OCCUPANCY events.; Tracks all requests from any source port.",
- "UMask": "0x1",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Total Write Cache Occupancy; Select Source",
- "EventCode": "0x12",
- "EventName": "UNC_I_CACHE_TOTAL_OCCUPANCY.SOURCE",
- "PerPkg": "1",
- "PublicDescription": "Accumulates the number of reads and writes that are outstanding in the uncore in each cycle. This is effectively the sum of the READ_OCCUPANCY and WRITE_OCCUPANCY events.; Tracks only those requests that come from the port specified in the IRP_PmonFilter.OrderingQ register. This register allows one to select one specific queue. It is not possible to monitor multiple queues at a time.",
- "UMask": "0x2",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Clocks in the IRP",
- "EventName": "UNC_I_CLOCKTICKS",
- "PerPkg": "1",
- "PublicDescription": "Number of clocks in the IRP.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Coherent Ops; CLFlush",
- "EventCode": "0x13",
- "EventName": "UNC_I_COHERENT_OPS.CLFLUSH",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
- "UMask": "0x80",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Coherent Ops; CRd",
- "EventCode": "0x13",
- "EventName": "UNC_I_COHERENT_OPS.CRD",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
- "UMask": "0x2",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Coherent Ops; DRd",
- "EventCode": "0x13",
- "EventName": "UNC_I_COHERENT_OPS.DRD",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
- "UMask": "0x4",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Coherent Ops; PCIDCAHin5t",
- "EventCode": "0x13",
- "EventName": "UNC_I_COHERENT_OPS.PCIDCAHINT",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
- "UMask": "0x20",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Coherent Ops; PCIRdCur",
- "EventCode": "0x13",
- "EventName": "UNC_I_COHERENT_OPS.PCIRDCUR",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
- "UMask": "0x1",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Coherent Ops; PCIItoM",
- "EventCode": "0x13",
- "EventName": "UNC_I_COHERENT_OPS.PCITOM",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
- "UMask": "0x10",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Coherent Ops; RFO",
- "EventCode": "0x13",
- "EventName": "UNC_I_COHERENT_OPS.RFO",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
- "UMask": "0x8",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Coherent Ops; WbMtoI",
- "EventCode": "0x13",
- "EventName": "UNC_I_COHERENT_OPS.WBMTOI",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of coherency related operations servied by the IRP",
- "UMask": "0x40",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 0; Cache Inserts of Atomic Transactions as Secondary",
- "EventCode": "0x14",
- "EventName": "UNC_I_MISC0.2ND_ATOMIC_INSERT",
- "PerPkg": "1",
- "PublicDescription": "Counts Timeouts - Set 0 : Cache Inserts of Atomic Transactions as Secondary",
- "UMask": "0x10",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 0; Cache Inserts of Read Transactions as Secondary",
- "EventCode": "0x14",
- "EventName": "UNC_I_MISC0.2ND_RD_INSERT",
- "PerPkg": "1",
- "PublicDescription": "Counts Timeouts - Set 0 : Cache Inserts of Read Transactions as Secondary",
- "UMask": "0x4",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 0; Cache Inserts of Write Transactions as Secondary",
- "EventCode": "0x14",
- "EventName": "UNC_I_MISC0.2ND_WR_INSERT",
- "PerPkg": "1",
- "PublicDescription": "Counts Timeouts - Set 0 : Cache Inserts of Write Transactions as Secondary",
- "UMask": "0x8",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 0; Fastpath Rejects",
- "EventCode": "0x14",
- "EventName": "UNC_I_MISC0.FAST_REJ",
- "PerPkg": "1",
- "PublicDescription": "Counts Timeouts - Set 0 : Fastpath Rejects",
- "UMask": "0x2",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 0; Fastpath Requests",
- "EventCode": "0x14",
- "EventName": "UNC_I_MISC0.FAST_REQ",
- "PerPkg": "1",
- "PublicDescription": "Counts Timeouts - Set 0 : Fastpath Requests",
- "UMask": "0x1",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 0; Fastpath Transfers From Primary to Secondary",
- "EventCode": "0x14",
- "EventName": "UNC_I_MISC0.FAST_XFER",
- "PerPkg": "1",
- "PublicDescription": "Counts Timeouts - Set 0 : Fastpath Transfers From Primary to Secondary",
- "UMask": "0x20",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 0; Prefetch Ack Hints From Primary to Secondary",
- "EventCode": "0x14",
- "EventName": "UNC_I_MISC0.PF_ACK_HINT",
- "PerPkg": "1",
- "PublicDescription": "Counts Timeouts - Set 0 : Prefetch Ack Hints From Primary to Secondary",
- "UMask": "0x40",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 0; Prefetch TimeOut",
- "EventCode": "0x14",
- "EventName": "UNC_I_MISC0.PF_TIMEOUT",
- "PerPkg": "1",
- "PublicDescription": "Indicates the fetch for a previous prefetch wasn't accepted by the prefetch. This happens in the case of a prefetch TimeOut",
- "UMask": "0x80",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 1; Data Throttled",
- "EventCode": "0x15",
- "EventName": "UNC_I_MISC1.DATA_THROTTLE",
- "PerPkg": "1",
- "PublicDescription": "IRP throttled switch data",
- "UMask": "0x80",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 1",
- "EventCode": "0x15",
- "EventName": "UNC_I_MISC1.LOST_FWD",
- "PerPkg": "1",
- "PublicDescription": "Misc Events - Set 1 : Lost Forward : Snoop pulled away ownership before a write was committed",
- "UMask": "0x10",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 1; Received Invalid",
- "EventCode": "0x15",
- "EventName": "UNC_I_MISC1.SEC_RCVD_INVLD",
- "PerPkg": "1",
- "PublicDescription": "Secondary received a transfer that did not have sufficient MESI state",
- "UMask": "0x20",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 1; Received Valid",
- "EventCode": "0x15",
- "EventName": "UNC_I_MISC1.SEC_RCVD_VLD",
- "PerPkg": "1",
- "PublicDescription": "Secondary received a transfer that did have sufficient MESI state",
- "UMask": "0x40",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 1; Slow Transfer of E Line",
- "EventCode": "0x15",
- "EventName": "UNC_I_MISC1.SLOW_E",
- "PerPkg": "1",
- "PublicDescription": "Secondary received a transfer that did have sufficient MESI state",
- "UMask": "0x4",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 1; Slow Transfer of I Line",
- "EventCode": "0x15",
- "EventName": "UNC_I_MISC1.SLOW_I",
- "PerPkg": "1",
- "PublicDescription": "Snoop took cacheline ownership before write from data was committed.",
- "UMask": "0x1",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 1; Slow Transfer of M Line",
- "EventCode": "0x15",
- "EventName": "UNC_I_MISC1.SLOW_M",
- "PerPkg": "1",
- "PublicDescription": "Snoop took cacheline ownership before write from data was committed.",
- "UMask": "0x8",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Misc Events - Set 1; Slow Transfer of S Line",
- "EventCode": "0x15",
- "EventName": "UNC_I_MISC1.SLOW_S",
- "PerPkg": "1",
- "PublicDescription": "Secondary received a transfer that did not have sufficient MESI state",
- "UMask": "0x2",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "AK Ingress Occupancy",
- "EventCode": "0xA",
- "EventName": "UNC_I_RxR_AK_INSERTS",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the AK Ingress. This queue is where the IRP receives responses from R2PCIe (the ring).",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
- "EventCode": "0x4",
- "EventName": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "BL Ingress Occupancy - DRS",
- "EventCode": "0x1",
- "EventName": "UNC_I_RxR_BL_DRS_INSERTS",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "UNC_I_RxR_BL_DRS_OCCUPANCY",
- "EventCode": "0x7",
- "EventName": "UNC_I_RxR_BL_DRS_OCCUPANCY",
- "PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
- "EventCode": "0x5",
- "EventName": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "BL Ingress Occupancy - NCB",
- "EventCode": "0x2",
- "EventName": "UNC_I_RxR_BL_NCB_INSERTS",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "UNC_I_RxR_BL_NCB_OCCUPANCY",
- "EventCode": "0x8",
- "EventName": "UNC_I_RxR_BL_NCB_OCCUPANCY",
- "PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
- "EventCode": "0x6",
- "EventName": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "BL Ingress Occupancy - NCS",
- "EventCode": "0x3",
- "EventName": "UNC_I_RxR_BL_NCS_INSERTS",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "UNC_I_RxR_BL_NCS_OCCUPANCY",
- "EventCode": "0x9",
- "EventName": "UNC_I_RxR_BL_NCS_OCCUPANCY",
- "PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Snoop Responses; Hit E or S",
- "EventCode": "0x17",
- "EventName": "UNC_I_SNOOP_RESP.HIT_ES",
- "PerPkg": "1",
- "PublicDescription": "Snoop Responses : Hit E or S",
- "UMask": "0x4",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Snoop Responses; Hit I",
- "EventCode": "0x17",
- "EventName": "UNC_I_SNOOP_RESP.HIT_I",
- "PerPkg": "1",
- "PublicDescription": "Snoop Responses : Hit I",
- "UMask": "0x2",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Snoop Responses; Hit M",
- "EventCode": "0x17",
- "EventName": "UNC_I_SNOOP_RESP.HIT_M",
- "PerPkg": "1",
- "PublicDescription": "Snoop Responses : Hit M",
- "UMask": "0x8",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Snoop Responses; Miss",
- "EventCode": "0x17",
- "EventName": "UNC_I_SNOOP_RESP.MISS",
- "PerPkg": "1",
- "PublicDescription": "Snoop Responses : Miss",
- "UMask": "0x1",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Snoop Responses; SnpCode",
- "EventCode": "0x17",
- "EventName": "UNC_I_SNOOP_RESP.SNPCODE",
- "PerPkg": "1",
- "PublicDescription": "Snoop Responses : SnpCode",
- "UMask": "0x10",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Snoop Responses; SnpData",
- "EventCode": "0x17",
- "EventName": "UNC_I_SNOOP_RESP.SNPDATA",
- "PerPkg": "1",
- "PublicDescription": "Snoop Responses : SnpData",
- "UMask": "0x20",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Snoop Responses; SnpInv",
- "EventCode": "0x17",
- "EventName": "UNC_I_SNOOP_RESP.SNPINV",
- "PerPkg": "1",
- "PublicDescription": "Snoop Responses : SnpInv",
- "UMask": "0x40",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Inbound Transaction Count; Atomic",
- "EventCode": "0x16",
- "EventName": "UNC_I_TRANSACTIONS.ATOMIC",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks the number of atomic transactions",
- "UMask": "0x10",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Inbound Transaction Count; Other",
- "EventCode": "0x16",
- "EventName": "UNC_I_TRANSACTIONS.OTHER",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks the number of 'other' kinds of transactions.",
- "UMask": "0x20",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Inbound Transaction Count; Read Prefetches",
- "EventCode": "0x16",
- "EventName": "UNC_I_TRANSACTIONS.RD_PREF",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks the number of read prefetches.",
- "UMask": "0x4",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Inbound Transaction Count; Reads",
- "EventCode": "0x16",
- "EventName": "UNC_I_TRANSACTIONS.READS",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks only read requests (not including read prefetches).",
- "UMask": "0x1",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Inbound Transaction Count; Writes",
- "EventCode": "0x16",
- "EventName": "UNC_I_TRANSACTIONS.WRITES",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks only write requests. Each write request should have a prefetch, so there is no need to explicitly track these requests.",
- "UMask": "0x2",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Inbound Transaction Count; Write Prefetches",
- "EventCode": "0x16",
- "EventName": "UNC_I_TRANSACTIONS.WR_PREF",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of Inbound transactions from the IRP to the Uncore. This can be filtered based on request type in addition to the source queue. Note the special filtering equation. We do OR-reduction on the request type. If the SOURCE bit is set, then we also do AND qualification based on the source portID.; Tracks the number of write prefetches.",
- "UMask": "0x8",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "No AD Egress Credit Stalls",
- "EventCode": "0x18",
- "EventName": "UNC_I_TxR_AD_STALL_CREDIT_CYCLES",
- "PerPkg": "1",
- "PublicDescription": "Counts the number times when it is not possible to issue a request to the R2PCIe because there are no AD Egress Credits available.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "No BL Egress Credit Stalls",
- "EventCode": "0x19",
- "EventName": "UNC_I_TxR_BL_STALL_CREDIT_CYCLES",
- "PerPkg": "1",
- "PublicDescription": "Counts the number times when it is not possible to issue data to the R2PCIe because there are no BL Egress Credits available.",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Outbound Read Requests",
- "EventCode": "0xE",
- "EventName": "UNC_I_TxR_DATA_INSERTS_NCB",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of requests issued to the switch (towards the devices).",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Outbound Read Requests",
- "EventCode": "0xF",
- "EventName": "UNC_I_TxR_DATA_INSERTS_NCS",
- "PerPkg": "1",
- "PublicDescription": "Counts the number of requests issued to the switch (towards the devices).",
- "Unit": "IRP"
- },
- {
- "BriefDescription": "Outbound Request Queue Occupancy",
- "EventCode": "0xD",
- "EventName": "UNC_I_TxR_REQUEST_OCCUPANCY",
- "PerPkg": "1",
- "PublicDescription": "Accumulates the number of outstanding outbound requests from the IRP to the switch (towards the devices). This can be used in conjunction with the allocations event in order to calculate average latency of outbound requests.",
- "Unit": "IRP"
- },
{
"BriefDescription": "Number of uclks in domain",
"EventCode": "0x1",
@@ -1029,139 +551,5 @@
"PublicDescription": "AD CounterClockwise Egress Queue",
"UMask": "0x10",
"Unit": "R2PCIe"
- },
- {
- "BriefDescription": "VLW Received",
- "EventCode": "0x42",
- "EventName": "UNC_U_EVENT_MSG.DOORBELL_RCVD",
- "PerPkg": "1",
- "PublicDescription": "Virtual Logical Wire (legacy) message were received from Uncore. Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
- "UMask": "0x8",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Filter Match",
- "EventCode": "0x41",
- "EventName": "UNC_U_FILTER_MATCH.DISABLE",
- "PerPkg": "1",
- "PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
- "UMask": "0x2",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Filter Match",
- "EventCode": "0x41",
- "EventName": "UNC_U_FILTER_MATCH.ENABLE",
- "PerPkg": "1",
- "PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
- "UMask": "0x1",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Filter Match",
- "EventCode": "0x41",
- "EventName": "UNC_U_FILTER_MATCH.U2C_DISABLE",
- "PerPkg": "1",
- "PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
- "UMask": "0x8",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Filter Match",
- "EventCode": "0x41",
- "EventName": "UNC_U_FILTER_MATCH.U2C_ENABLE",
- "PerPkg": "1",
- "PublicDescription": "Filter match per thread (w/ or w/o Filter Enable). Specify the thread to filter on using NCUPMONCTRLGLCTR.ThreadID.",
- "UMask": "0x4",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Cycles PHOLD Assert to Ack; Assert to ACK",
- "EventCode": "0x45",
- "EventName": "UNC_U_PHOLD_CYCLES.ASSERT_TO_ACK",
- "PerPkg": "1",
- "PublicDescription": "PHOLD cycles. Filter from source CoreID.",
- "UMask": "0x1",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "RACU Request",
- "EventCode": "0x46",
- "EventName": "UNC_U_RACU_REQUESTS",
- "PerPkg": "1",
- "PublicDescription": "Number outstanding register requests within message channel tracker",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Monitor Sent to T0; Correctable Machine Check",
- "EventCode": "0x43",
- "EventName": "UNC_U_U2C_EVENTS.CMC",
- "PerPkg": "1",
- "PublicDescription": "Events coming from Uncore can be sent to one or all cores",
- "UMask": "0x10",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Monitor Sent to T0; Livelock",
- "EventCode": "0x43",
- "EventName": "UNC_U_U2C_EVENTS.LIVELOCK",
- "PerPkg": "1",
- "PublicDescription": "Events coming from Uncore can be sent to one or all cores; Filter by core",
- "UMask": "0x4",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Monitor Sent to T0; LTError",
- "EventCode": "0x43",
- "EventName": "UNC_U_U2C_EVENTS.LTERROR",
- "PerPkg": "1",
- "PublicDescription": "Events coming from Uncore can be sent to one or all cores; Filter by core",
- "UMask": "0x8",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Monitor Sent to T0; Monitor T0",
- "EventCode": "0x43",
- "EventName": "UNC_U_U2C_EVENTS.MONITOR_T0",
- "PerPkg": "1",
- "PublicDescription": "Events coming from Uncore can be sent to one or all cores; Filter by core",
- "UMask": "0x1",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Monitor Sent to T0; Monitor T1",
- "EventCode": "0x43",
- "EventName": "UNC_U_U2C_EVENTS.MONITOR_T1",
- "PerPkg": "1",
- "PublicDescription": "Events coming from Uncore can be sent to one or all cores; Filter by core",
- "UMask": "0x2",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Monitor Sent to T0; Other",
- "EventCode": "0x43",
- "EventName": "UNC_U_U2C_EVENTS.OTHER",
- "PerPkg": "1",
- "PublicDescription": "Events coming from Uncore can be sent to one or all cores; PREQ, PSMI, P2U, Thermal, PCUSMI, PMI",
- "UMask": "0x80",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Monitor Sent to T0; Trap",
- "EventCode": "0x43",
- "EventName": "UNC_U_U2C_EVENTS.TRAP",
- "PerPkg": "1",
- "PublicDescription": "Events coming from Uncore can be sent to one or all cores",
- "UMask": "0x40",
- "Unit": "UBOX"
- },
- {
- "BriefDescription": "Monitor Sent to T0; Uncorrectable Machine Check",
- "EventCode": "0x43",
- "EventName": "UNC_U_U2C_EVENTS.UMC",
- "PerPkg": "1",
- "PublicDescription": "Events coming from Uncore can be sent to one or all cores",
- "UMask": "0x20",
- "Unit": "UBOX"
}
]
--
2.40.0.577.gac1e443424-goog

Next message: Ian Rogers: "[PATCH v3 08/21] perf vendor events intel: Fix uncore topics for cascadelakex"
Previous message: Ian Rogers: "[PATCH v3 07/21] perf vendor events intel: Fix uncore topics for broadwellx"
In reply to: Ian Rogers: "[PATCH v3 07/21] perf vendor events intel: Fix uncore topics for broadwellx"
Next in thread: Ian Rogers: "[PATCH v3 08/21] perf vendor events intel: Fix uncore topics for cascadelakex"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]