[PATCH v2 3/3] arm64: dts: qcom: sa8155p-adp: Remove unneeded rgmii_phy information

[Andrew Halaney]

Using interrupts-extended already indicates what the interrupt-parent
is, so drop the explicit interrupt-parent.

The comment about this being the phy-intr is not helpful either, since
this is the only interrupt in the phy node.

Suggested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
---

Changes since v1:
    * New patch (Konrad)

 arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index ac52a8dfeba1..b65e0203d783 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -361,8 +361,7 @@ rgmii_phy: phy@7 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0x7>;
 
-			interrupt-parent = <&tlmm>;
-			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
+			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>;
 			device_type = "ethernet-phy";
 		};
 	};
-- 
2.39.2