[patch 37/37] x86/smpboot: Allow parallel bringup for SEV-ES

[Thomas Gleixner]

From: David Woodhouse <dwmw@xxxxxxxxxxxx>

Enable parallel bringup for SEV-ES guests. The APs can't actually execute
the CPUID instruction directly during early startup, but they can make the
GHCB call directly instead, just as the #VC trap handler would do.

Thanks to Sabin for talking me through the way this works.

Suggested-by: Sabin Rapan <sabrapan@xxxxxxxxxx>
Signed-off-by: David Woodhouse <dwmw@xxxxxxxxxxxx>
Signed-off-by: Usama Arif <usama.arif@xxxxxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Reviewed-by: Tom Lendacky <thomas.lendacky@xxxxxxx>

---
 arch/x86/include/asm/sev-common.h |    3 +++
 arch/x86/include/asm/smp.h        |    1 +
 arch/x86/kernel/head_64.S         |   30 ++++++++++++++++++++++++++++++
 arch/x86/kernel/smpboot.c         |   14 ++++++++++++--
 4 files changed, 46 insertions(+), 2 deletions(-)

--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -70,6 +70,7 @@
 	/* GHCBData[63:12] */				\
 	(((u64)(v) & GENMASK_ULL(63, 12)) >> 12)
 
+#ifndef __ASSEMBLY__
 /*
  * SNP Page State Change Operation
  *
@@ -161,6 +162,8 @@ struct snp_psc_desc {
 
 #define GHCB_RESP_CODE(v)		((v) & GHCB_MSR_INFO_MASK)
 
+#endif /* __ASSEMBLY__ */
+
 /*
  * Error codes related to GHCB input that can be communicated back to the guest
  * by setting the lower 32-bits of the GHCB SW_EXITINFO1 field to 2.
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -202,6 +202,7 @@ extern unsigned int smpboot_control;
 #define STARTUP_APICID_CPUID_1F 0x80000000
 #define STARTUP_APICID_CPUID_0B 0x40000000
 #define STARTUP_APICID_CPUID_01 0x20000000
+#define STARTUP_APICID_SEV_ES	0x10000000
 
 /* Top 8 bits are reserved for control */
 #define STARTUP_PARALLEL_MASK	0xFF000000
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -26,6 +26,7 @@
 #include <asm/nospec-branch.h>
 #include <asm/fixmap.h>
 #include <asm/smp.h>
+#include <asm/sev-common.h>
 
 /*
  * We are not able to switch in one step to the final KERNEL ADDRESS SPACE
@@ -243,9 +244,14 @@ SYM_INNER_LABEL(secondary_startup_64_no_
 	 * Bit 31	STARTUP_APICID_CPUID_1F flag (use CPUID 0x1f)
 	 * Bit 30	STARTUP_APICID_CPUID_0B flag (use CPUID 0x0b)
 	 * Bit 29	STARTUP_APICID_CPUID_01 flag (use CPUID 0x01)
+	 * Bit 28	STARTUP_APICID_SEV_ES flag (CPUID 0x0b via GHCB MSR)
 	 * Bit 0-23	CPU# if STARTUP_APICID_CPUID_xx flags are not set
 	 */
 	movl	smpboot_control(%rip), %ecx
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+	testl	$STARTUP_APICID_SEV_ES, %ecx
+	jnz	.Luse_sev_cpuid_0b
+#endif
 	testl	$STARTUP_APICID_CPUID_1F, %ecx
 	jnz	.Luse_cpuid_1f
 	testl	$STARTUP_APICID_CPUID_0B, %ecx
@@ -262,6 +268,30 @@ SYM_INNER_LABEL(secondary_startup_64_no_
 	shr	$24, %edx
 	jmp	.Lsetup_AP
 
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+.Luse_sev_cpuid_0b:
+	/* Set the GHCB MSR to request CPUID 0x0B_EDX */
+	movl	$MSR_AMD64_SEV_ES_GHCB, %ecx
+	movl	$(GHCB_CPUID_REQ_EDX << 30) | GHCB_MSR_CPUID_REQ, %eax
+	movl	$0x0b, %edx
+	wrmsr
+
+	/* Perform GHCB MSR protocol */
+	rep; vmmcall		/* vmgexit */
+
+	/*
+	 * Get the result. After the RDMSR:
+	 *   EAX should be 0xc0000005
+	 *   EDX should have the CPUID register value and since EDX
+	 *   is the target register, no need to move the result.
+	 */
+	rdmsr
+	andl	$GHCB_MSR_INFO_MASK, %eax
+	cmpl	$GHCB_MSR_CPUID_RESP, %eax
+	jne	1f
+	jmp	.Lsetup_AP
+#endif
+
 .Luse_cpuid_0b:
 	mov	$0x0B, %eax
 	xorl	%ecx, %ecx
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -86,6 +86,7 @@
 #include <asm/hw_irq.h>
 #include <asm/stackprotector.h>
 #include <asm/sev.h>
+#include <asm/coco.h>
 
 /* representing HT siblings of each logical CPU */
 DEFINE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_sibling_map);
@@ -1266,8 +1267,16 @@ bool __init arch_cpuhp_init_parallel_bri
 
 	/* Encrypted guests require special CPUID handling. */
 	if (cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT)) {
-		pr_info("Parallel CPU startup disabled due to guest state encryption\n");
-		return false;
+		switch (cc_get_vendor()) {
+		case CC_VENDOR_AMD:
+			ctrl = STARTUP_APICID_SEV_ES;
+			if (topology_extended_leaf == 0x0b)
+				goto setup;
+			fallthrough;
+		default:
+			pr_info("Parallel CPU startup disabled due to guest state encryption\n");
+			return false;
+		}
 	}
 
 	switch (topology_extended_leaf) {
@@ -1290,6 +1299,7 @@ bool __init arch_cpuhp_init_parallel_bri
 		return false;
 	}
 
+setup:
 	pr_debug("Parallel CPU startup enabled: 0x%08x\n", ctrl);
 	smpboot_control = ctrl;
 	return true;