[PATCH v3 1/3] dt-bindings: display: panel: Add Samsung S6D7AA0 LCD panel controller

[Artur Weber]

Add bindings for the S6D7AA0 LCD panel controller, including the
S6D7AA0-LSL080AL02 panel used in the Samsung Galaxy Tab 3 8.0 family
of tablets.

Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
---
Changed in v2:
 - Updated commit message
 - Applied suggestions from Krzysztof Kozlowski
Changed in v3:
 - Correctly applied suggestions
---
 .../display/panel/samsung,s6d7aa0.yaml        | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
new file mode 100644
index 000000000000..079e2b3a9eaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D7AA0 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Artur Weber <aweber.kernel@xxxxxxxxx>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6d7aa0-lsl080al02
+
+  reg: true
+  reset-gpios: true
+  backlight: true
+
+  enable-supply:
+    description: Enable supply
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - backlight
+  - enable-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6d7aa0-lsl080al02";
+            reg = <0>;
+            reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+            enable-supply = <&lcd_enable_supply>;
+        };
+    };
+
+...
-- 
2.40.0