Re: [PATCH v2] thermal/drivers/intel/int340x: Add DLVR support

From: Rafael J. Wysocki
Date: Mon Apr 17 2023 - 06:29:18 EST

Next message: Hans de Goede: "Re: [PATCH] platform/x86/intel/pmt: Ignore uninitialized entries"
Previous message: Tianrui Zhao: "[PATCH v7 18/30] LoongArch: KVM: Implement vcpu timer operations"
In reply to: Daniel Lezcano: "Re: [PATCH v2] thermal/drivers/intel/int340x: Add DLVR support"
Next in thread: Daniel Lezcano: "Re: [PATCH v2] thermal/drivers/intel/int340x: Add DLVR support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Daniel,

On Mon, Apr 17, 2023 at 12:00 PM Daniel Lezcano
<daniel.lezcano@xxxxxxxxxx> wrote:
>
>
> Hi Rafael,
>
> do you want me to pick this patch ?

No, thank you.

You can generally assume that I will be applying patches for
thermal/intel/ and ACPI-related ones directly.

I may pick up thermal core patches too.

Thanks!

> On 13/04/2023 23:37, Srinivas Pandruvada wrote:
> > Add support for DLVR (Digital Linear Voltage Regulator) attributes,
> > which can be used to control RFIM.
> > Here instead of "fivr" another directory "dlvr" is created with DLVR
> > attributes:
> >
> > /sys/bus/pci/devices/0000:00:04.0/dlvr
> > ├── dlvr_freq_mhz
> > ├── dlvr_freq_select
> > ├── dlvr_hardware_rev
> > ├── dlvr_pll_busy
> > ├── dlvr_rfim_enable
> > └── dlvr_spread_spectrum_pct
> > └── dlvr_control_mode
> > └── dlvr_control_lock
> >
> > Attributes
> > dlvr_freq_mhz (RO):
> > Current DLVR PLL frequency in MHz.
> >
> > dlvr_freq_select (RW):
> > Sets DLVR PLL clock frequency.
> >
> > dlvr_hardware_rev (RO):
> > DLVR hardware revision.
> >
> > dlvr_pll_busy (RO):
> > PLL can't accept frequency change when set.
> >
> > dlvr_rfim_enable (RW):
> > 0: Disable RF frequency hopping, 1: Enable RF frequency hopping.
> >
> > dlvr_control_mode (RW):
> > Specifies how frequencies are spread. 0: Down spread, 1: Spread in Center.
> >
> > dlvr_control_lock (RW):
> > 1: future writes are ignored.
> >
> > dlvr_spread_spectrum_pct (RW)
> > A write to this register updates the DLVR spread spectrum percent value.
> >
> > Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
> > ---
> > v2
> > - Updated documentation
> > - Added dlvr_control_lock attribute
> >
> > .../driver-api/thermal/intel_dptf.rst | 46 +++++++++-
> > .../processor_thermal_device.c | 3 +-
> > .../processor_thermal_device.h | 1 +
> > .../processor_thermal_device_pci.c | 2 +-
> > .../int340x_thermal/processor_thermal_rfim.c | 92 ++++++++++++++++++-
> > 5 files changed, 135 insertions(+), 9 deletions(-)
> >
> > diff --git a/Documentation/driver-api/thermal/intel_dptf.rst b/Documentation/driver-api/thermal/intel_dptf.rst
> > index f5c193cccbda..9ab4316322a1 100644
> > --- a/Documentation/driver-api/thermal/intel_dptf.rst
> > +++ b/Documentation/driver-api/thermal/intel_dptf.rst
> > @@ -184,8 +184,9 @@ ABI.
> > DPTF Processor thermal RFIM interface
> > --------------------------------------------
> >
> > -RFIM interface allows adjustment of FIVR (Fully Integrated Voltage Regulator)
> > -and DDR (Double Data Rate)frequencies to avoid RF interference with WiFi and 5G.
> > +RFIM interface allows adjustment of FIVR (Fully Integrated Voltage Regulator),
> > +DDR (Double Data Rate) and DLVR (Digital Linear Voltage Regulator)
> > +frequencies to avoid RF interference with WiFi and 5G.
> >
> > Switching voltage regulators (VR) generate radiated EMI or RFI at the
> > fundamental frequency and its harmonics. Some harmonics may interfere
> > @@ -196,6 +197,15 @@ small % and shift away the switching noise harmonic interference from
> > radio channels. OEM or ODMs can use the driver to control SOC IVR
> > operation within the range where it does not impact IVR performance.
> >
> > +Some products use DLVR instead of FIVR as switching voltage regulator.
> > +In this case attributes of DLVR must be adjusted instead of FIVR.
> > +
> > +While shifting the frequencies additional clock noise can be introduced,
> > +which is compensated by adjusting Spread spectrum percent. This helps
> > +to reduce the clock noise to meet regulatory compliance. This spreading
> > +% increases bandwidth of signal transmission and hence reduces the
> > +effects of interference, noise and signal fading.
> > +
> > DRAM devices of DDR IO interface and their power plane can generate EMI
> > at the data rates. Similar to IVR control mechanism, Intel offers a
> > mechanism by which DDR data rates can be changed if several conditions
> > @@ -264,6 +274,38 @@ DVFS attributes
> > ``rfi_disable (RW)``
> > Disable DDR rate change feature
> >
> > +DLVR attributes
> > +
> > +:file:`/sys/bus/pci/devices/0000\:00\:04.0/dlvr/`
> > +
> > +``dlvr_hardware_rev`` (RO)
> > + DLVR hardware revision.
> > +
> > +``dlvr_freq_mhz`` (RO)
> > + Current DLVR PLL frequency in MHz.
> > +
> > +``dlvr_freq_select`` (RW)
> > + Sets DLVR PLL clock frequency. Once set, and enabled via
> > + dlvr_rfim_enable, the dlvr_freq_mhz will show the current
> > + DLVR PLL frequency.
> > +
> > +``dlvr_pll_busy`` (RO)
> > + PLL can't accept frequency change when set.
> > +
> > +``dlvr_rfim_enable`` (RW)
> > + 0: Disable RF frequency hopping, 1: Enable RF frequency hopping.
> > +
> > +``dlvr_spread_spectrum_pct`` (RW)
> > + Sets DLVR spread spectrum percent value.
> > +
> > +``dlvr_control_mode`` (RW)
> > + Specifies how frequencies are spread using spread spectrum.
> > + 0: Down spread,
> > + 1: Spread in the Center.
> > +
> > +``dlvr_control_lock`` (RW)
> > + 1: future writes are ignored.
> > +
> > DPTF Power supply and Battery Interface
> > ----------------------------------------
> >
> > diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> > index a1dc18be7609..3ca0a2f5937f 100644
> > --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> > +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> > @@ -337,7 +337,8 @@ int proc_thermal_mmio_add(struct pci_dev *pdev,
> > }
> >
> > if (feature_mask & PROC_THERMAL_FEATURE_FIVR ||
> > - feature_mask & PROC_THERMAL_FEATURE_DVFS) {
> > + feature_mask & PROC_THERMAL_FEATURE_DVFS ||
> > + feature_mask & PROC_THERMAL_FEATURE_DLVR) {
> > ret = proc_thermal_rfim_add(pdev, proc_priv);
> > if (ret) {
> > dev_err(&pdev->dev, "failed to add RFIM interface\n");
> > diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> > index 7d52fcff4937..7acaa8f1b896 100644
> > --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> > +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> > @@ -60,6 +60,7 @@ struct rapl_mmio_regs {
> > #define PROC_THERMAL_FEATURE_FIVR 0x02
> > #define PROC_THERMAL_FEATURE_DVFS 0x04
> > #define PROC_THERMAL_FEATURE_MBOX 0x08
> > +#define PROC_THERMAL_FEATURE_DLVR 0x10
> >
> > #if IS_ENABLED(CONFIG_PROC_THERMAL_MMIO_RAPL)
> > int proc_thermal_rapl_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
> > diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
> > index d71ee50e7878..8b260dd9221b 100644
> > --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
> > +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
> > @@ -351,7 +351,7 @@ static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, proc_thermal_pci_suspend,
> >
> > static const struct pci_device_id proc_thermal_pci_ids[] = {
> > { PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
> > - { PCI_DEVICE_DATA(INTEL, MTLP_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
> > + { PCI_DEVICE_DATA(INTEL, MTLP_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX | PROC_THERMAL_FEATURE_DLVR) },
> > { PCI_DEVICE_DATA(INTEL, RPL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
> > { },
> > };
> > diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> > index 92ed1213fe37..546b70434004 100644
> > --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> > +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> > @@ -39,6 +39,29 @@ static const struct mmio_reg tgl_fivr_mmio_regs[] = {
> > { 1, 0x5A14, 2, 0x3, 1}, /* fivr_fffc_rev */
> > };
> >
> > +static const char * const dlvr_strings[] = {
> > + "dlvr_spread_spectrum_pct",
> > + "dlvr_control_mode",
> > + "dlvr_control_lock",
> > + "dlvr_rfim_enable",
> > + "dlvr_freq_select",
> > + "dlvr_hardware_rev",
> > + "dlvr_freq_mhz",
> > + "dlvr_pll_busy",
> > + NULL
> > +};
> > +
> > +static const struct mmio_reg dlvr_mmio_regs[] = {
> > + { 0, 0x15A08, 5, 0x1F, 0}, /* dlvr_spread_spectrum_pct */
> > + { 0, 0x15A08, 1, 0x1, 5}, /* dlvr_control_mode */
> > + { 0, 0x15A08, 1, 0x1, 6}, /* dlvr_control_lock */
> > + { 0, 0x15A08, 1, 0x1, 7}, /* dlvr_rfim_enable */
> > + { 0, 0x15A08, 12, 0xFFF, 8}, /* dlvr_freq_select */
> > + { 1, 0x15A10, 2, 0x3, 30}, /* dlvr_hardware_rev */
> > + { 1, 0x15A10, 16, 0xFFFF, 0}, /* dlvr_freq_mhz */
> > + { 1, 0x15A10, 1, 0x1, 16}, /* dlvr_pll_busy */
> > +};
> > +
> > /* These will represent sysfs attribute names */
> > static const char * const dvfs_strings[] = {
> > "rfi_restriction_run_busy",
> > @@ -78,14 +101,16 @@ static ssize_t suffix##_show(struct device *dev,\
> > int ret;\
> > \
> > proc_priv = pci_get_drvdata(pdev);\
> > - if (table) {\
> > + if (table == 1) {\
> > match_strs = (const char **)dvfs_strings;\
> > mmio_regs = adl_dvfs_mmio_regs;\
> > - } else { \
> > + } else if (table == 2) { \
> > + match_strs = (const char **)dlvr_strings;\
> > + mmio_regs = dlvr_mmio_regs;\
> > + } else {\
> > match_strs = (const char **)fivr_strings;\
> > mmio_regs = tgl_fivr_mmio_regs;\
> > } \
> > - \
> > ret = match_string(match_strs, -1, attr->attr.name);\
> > if (ret < 0)\
> > return ret;\
> > @@ -109,10 +134,13 @@ static ssize_t suffix##_store(struct device *dev,\
> > u32 mask;\
> > \
> > proc_priv = pci_get_drvdata(pdev);\
> > - if (table) {\
> > + if (table == 1) {\
> > match_strs = (const char **)dvfs_strings;\
> > mmio_regs = adl_dvfs_mmio_regs;\
> > - } else { \
> > + } else if (table == 2) { \
> > + match_strs = (const char **)dlvr_strings;\
> > + mmio_regs = dlvr_mmio_regs;\
> > + } else {\
> > match_strs = (const char **)fivr_strings;\
> > mmio_regs = tgl_fivr_mmio_regs;\
> > } \
> > @@ -147,6 +175,47 @@ RFIM_STORE(spread_spectrum_clk_enable, 0)
> > RFIM_STORE(rfi_vco_ref_code, 0)
> > RFIM_STORE(fivr_fffc_rev, 0)
> >
> > +RFIM_SHOW(dlvr_spread_spectrum_pct, 2)
> > +RFIM_SHOW(dlvr_control_mode, 2)
> > +RFIM_SHOW(dlvr_control_lock, 2)
> > +RFIM_SHOW(dlvr_hardware_rev, 2)
> > +RFIM_SHOW(dlvr_freq_mhz, 2)
> > +RFIM_SHOW(dlvr_pll_busy, 2)
> > +RFIM_SHOW(dlvr_freq_select, 2)
> > +RFIM_SHOW(dlvr_rfim_enable, 2)
> > +
> > +RFIM_STORE(dlvr_spread_spectrum_pct, 2)
> > +RFIM_STORE(dlvr_rfim_enable, 2)
> > +RFIM_STORE(dlvr_freq_select, 2)
> > +RFIM_STORE(dlvr_control_mode, 2)
> > +RFIM_STORE(dlvr_control_lock, 2)
> > +
> > +static DEVICE_ATTR_RW(dlvr_spread_spectrum_pct);
> > +static DEVICE_ATTR_RW(dlvr_control_mode);
> > +static DEVICE_ATTR_RW(dlvr_control_lock);
> > +static DEVICE_ATTR_RW(dlvr_freq_select);
> > +static DEVICE_ATTR_RO(dlvr_hardware_rev);
> > +static DEVICE_ATTR_RO(dlvr_freq_mhz);
> > +static DEVICE_ATTR_RO(dlvr_pll_busy);
> > +static DEVICE_ATTR_RW(dlvr_rfim_enable);
> > +
> > +static struct attribute *dlvr_attrs[] = {
> > + &dev_attr_dlvr_spread_spectrum_pct.attr,
> > + &dev_attr_dlvr_control_mode.attr,
> > + &dev_attr_dlvr_control_lock.attr,
> > + &dev_attr_dlvr_freq_select.attr,
> > + &dev_attr_dlvr_hardware_rev.attr,
> > + &dev_attr_dlvr_freq_mhz.attr,
> > + &dev_attr_dlvr_pll_busy.attr,
> > + &dev_attr_dlvr_rfim_enable.attr,
> > + NULL
> > +};
> > +
> > +static const struct attribute_group dlvr_attribute_group = {
> > + .attrs = dlvr_attrs,
> > + .name = "dlvr"
> > +};
> > +
> > static DEVICE_ATTR_RW(vco_ref_code_lo);
> > static DEVICE_ATTR_RW(vco_ref_code_hi);
> > static DEVICE_ATTR_RW(spread_spectrum_pct);
> > @@ -277,12 +346,22 @@ int proc_thermal_rfim_add(struct pci_dev *pdev, struct proc_thermal_device *proc
> > return ret;
> > }
> >
> > + if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DLVR) {
> > + ret = sysfs_create_group(&pdev->dev.kobj, &dlvr_attribute_group);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS) {
> > ret = sysfs_create_group(&pdev->dev.kobj, &dvfs_attribute_group);
> > if (ret && proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR) {
> > sysfs_remove_group(&pdev->dev.kobj, &fivr_attribute_group);
> > return ret;
> > }
> > + if (ret && proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DLVR) {
> > + sysfs_remove_group(&pdev->dev.kobj, &dlvr_attribute_group);
> > + return ret;
> > + }
> > }
> >
> > return 0;
> > @@ -296,6 +375,9 @@ void proc_thermal_rfim_remove(struct pci_dev *pdev)
> > if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR)
> > sysfs_remove_group(&pdev->dev.kobj, &fivr_attribute_group);
> >
> > + if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DLVR)
> > + sysfs_remove_group(&pdev->dev.kobj, &dlvr_attribute_group);
> > +
> > if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS)
> > sysfs_remove_group(&pdev->dev.kobj, &dvfs_attribute_group);
> > }
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
>

Next message: Hans de Goede: "Re: [PATCH] platform/x86/intel/pmt: Ignore uninitialized entries"
Previous message: Tianrui Zhao: "[PATCH v7 18/30] LoongArch: KVM: Implement vcpu timer operations"
In reply to: Daniel Lezcano: "Re: [PATCH v2] thermal/drivers/intel/int340x: Add DLVR support"
Next in thread: Daniel Lezcano: "Re: [PATCH v2] thermal/drivers/intel/int340x: Add DLVR support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]