[net-next PATCH v7 03/16] net: dsa: qca8k: add LEDs blink_set() support
From: Christian Marangi
Date: Mon Apr 17 2023 - 11:20:22 EST
Add LEDs blink_set() support to qca8k Switch Family.
These LEDs support hw accellerated blinking at a fixed rate
of 4Hz.
Reject any other value since not supported by the LEDs switch.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Acked-by: Pavel Machek <pavel@xxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
drivers/net/dsa/qca/qca8k-leds.c | 38 ++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/drivers/net/dsa/qca/qca8k-leds.c b/drivers/net/dsa/qca/qca8k-leds.c
index 0146ee12d34c..b883692b7d86 100644
--- a/drivers/net/dsa/qca/qca8k-leds.c
+++ b/drivers/net/dsa/qca/qca8k-leds.c
@@ -127,6 +127,43 @@ qca8k_led_brightness_get(struct qca8k_led *led)
return val == QCA8K_LED_ALWAYS_ON;
}
+static int
+qca8k_cled_blink_set(struct led_classdev *ldev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
+ u32 mask, val = QCA8K_LED_ALWAYS_BLINK_4HZ;
+ struct qca8k_led_pattern_en reg_info;
+ struct qca8k_priv *priv = led->priv;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 125;
+ *delay_off = 125;
+ }
+
+ if (*delay_on != 125 || *delay_off != 125) {
+ /* The hardware only supports blinking at 4Hz. Fall back
+ * to software implementation in other cases.
+ */
+ return -EINVAL;
+ }
+
+ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info);
+
+ if (led->port_num == 0 || led->port_num == 4) {
+ mask = QCA8K_LED_PATTERN_EN_MASK;
+ val <<= QCA8K_LED_PATTERN_EN_SHIFT;
+ } else {
+ mask = QCA8K_LED_PHY123_PATTERN_EN_MASK;
+ }
+
+ regmap_update_bits(priv->regmap, reg_info.reg, mask << reg_info.shift,
+ val << reg_info.shift);
+
+ return 0;
+}
+
static int
qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num)
{
@@ -186,6 +223,7 @@ qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int p
port_led->cdev.max_brightness = 1;
port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking;
+ port_led->cdev.blink_set = qca8k_cled_blink_set;
init_data.default_label = ":port";
init_data.fwnode = led;
init_data.devname_mandatory = true;
--
2.39.2