Re: [PATCH v12 1/4] dt-bindings: i2c: Correct interrupt support

[Krzysztof Kozlowski]

On 17/04/2023 12:47, Patrick Rudolph wrote:
> Only some of the PCA954x compatible ICs have interrupt
> capability, but the binding advertises it on all ICs.

Subject: Add proper prefix for the device. You are not correcting
interrupt support in all I2C controllers.

> 
> Sync the dt-binding with the driver and only advertise it on:
>  - nxp,pca9542
>  - nxp,pca9543
>  - nxp,pca9544
>  - nxp,pca9545
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> ---
>  .../bindings/i2c/i2c-mux-pca954x.yaml         | 20 ++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
> index 9f1726d0356b..93ffa67d0d9c 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
> @@ -63,6 +63,24 @@ required:
>    - compatible
>    - reg
>  
> +allOf:
> +  - $ref: /schemas/i2c/i2c-mux.yaml#

Duplicated part.

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

Best regards,
Krzysztof