[PATCH v2 net-next 2/9] net: enetc: report mm tx-active based on tx-enabled and verify-status

[Vladimir Oltean]

The MMCSR register contains 2 fields with overlapping meaning:

- LPA (Local preemption active):
This read-only status bit indicates whether preemption is active for
this port. This bit will be set if preemption is both enabled and has
completed the verification process.
- TXSTS (Merge status):
This read-only status field provides the state of the MAC Merge sublayer
transmit status as defined in IEEE Std 802.3-2018 Clause 99.
00 Transmit preemption is inactive
01 Transmit preemption is active
10 Reserved
11 Reserved

However none of these 2 fields offer reliable reporting to software.

When connecting ENETC to a link partner which is not capable of Frame
Preemption, the expectation is that ENETC's verification should fail
(VSTS=4) and its MM TX direction should be inactive (LPA=0, TXSTS=00)
even though the MM TX is enabled (ME=1). But surprise, the LPA bit of
MMCSR stays set even if VSTS=4 and ME=1.

OTOH, the TXSTS field has the opposite problem. I cannot get its value
to change from 0, even when connecting to a link partner capable of
frame preemption, which does respond to its verification frames (ME=1
and VSTS=3, "SUCCEEDED").

The only option with such buggy hardware seems to be to reimplement the
formula for calculating tx-active in software, which is for tx-enabled
to be true, and for the verify-status to be either SUCCEEDED, or
DISABLED.

Without reliable tx-active reporting, we have no good indication when
to commit the preemptible traffic classes to hardware, which makes it
possible (but not desirable) to send preemptible traffic to a link
partner incapable of receiving it. However, currently we do not have the
logic to wait for TX to be active yet, so the impact is limited.

Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
v1->v2: patch is new

 drivers/net/ethernet/freescale/enetc/enetc_ethtool.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
index ee1ea71fe79e..deb674752851 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
@@ -976,7 +976,9 @@ static int enetc_get_mm(struct net_device *ndev, struct ethtool_mm_state *state)
 	lafs = ENETC_MMCSR_GET_LAFS(val);
 	state->rx_min_frag_size = ethtool_mm_frag_size_add_to_min(lafs);
 	state->tx_enabled = !!(val & ENETC_MMCSR_LPE); /* mirror of MMCSR_ME */
-	state->tx_active = !!(val & ENETC_MMCSR_LPA);
+	state->tx_active = state->tx_enabled &&
+			   (state->verify_status == ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED ||
+			    state->verify_status == ETHTOOL_MM_VERIFY_STATUS_DISABLED);
 	state->verify_enabled = !(val & ENETC_MMCSR_VDIS);
 	state->verify_time = ENETC_MMCSR_GET_VT(val);
 	/* A verifyTime of 128 ms would exceed the 7 bit width
-- 
2.34.1