Re: [PATCH 2/2] iio: light: Add support for TI OPT4001 light sensor

[Krzysztof Kozlowski]

On 04/04/2023 11:07, Stefan Windfeldt-Prytz wrote:
> This driver uses the continuous mode of the chip and integration
> time can be configured through sysfs.
> The constants for calculating lux value differs between packaging
> so it uses different compatible string for the two versions
> "ti,opt4001-picostar" and "ti,opt4001-sot-5x3" since the device id
> is the same.

Thank you for your patch. There is something to discuss/improve.

> +
> +	indio_dev->channels = opt4001_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(opt4001_channels);
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->name = chip->client->name;
> +
> +	of_id = of_match_device(of_match_ptr(opt4001_of_match), &client->dev);

? Drop of_match_ptr

> +	chip->package_constants = of_id->data;
> +
> +	ret = opt4001_load_defaults(chip);
> +	if (ret < 0)
> +		return dev_err_probe(&client->dev, ret,
> +				     "Failed to set sensor defaults\n");
> +
> +	return devm_iio_device_register(&client->dev, indio_dev);
> +}
> +
> +static void opt4001_remove(struct i2c_client *client)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +	struct opt4001_chip *chip = iio_priv(indio_dev);
> +
> +	opt4001_power_down(chip);
> +}
> +
> +static struct i2c_driver opt4001_driver = {
> +	.driver = {
> +		.name = "opt4001",
> +		.of_match_table = of_match_ptr(opt4001_of_match),

This should sparkle some warnings. Drop of_match_ptr().

Best regards,
Krzysztof