Re: [PATCH v4 6/8] media: dt-bindings: Add bindings for JH7110 Camera Subsystem

[Laurent Pinchart]

Hi Jack,

Thank you for the patch.

On Thu, Apr 13, 2023 at 11:55:39AM +0800, Jack Zhu wrote:
> Add the bindings documentation for Starfive JH7110 Camera Subsystem
> which is used for handing image sensor data.
> 
> Signed-off-by: Jack Zhu <jack.zhu@xxxxxxxxxxxxxxxx>
> ---
>  .../bindings/media/starfive,jh7110-camss.yaml | 164 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  2 files changed, 171 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> new file mode 100644
> index 000000000000..4cd144f1b845
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> @@ -0,0 +1,164 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Starfive SoC CAMSS ISP
> +
> +maintainers:
> +  - Jack Zhu <jack.zhu@xxxxxxxxxxxxxxxx>
> +  - Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
> +
> +description:
> +  The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It
> +  consists of a VIN controller (Video In Controller, a top-level control until)
> +  and an ISP.
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-camss
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: syscon
> +      - const: isp
> +
> +  clocks:
> +    maxItems: 7
> +
> +  clock-names:
> +    items:
> +      - const: apb_func
> +      - const: wrapper_clk_c
> +      - const: dvp_inv
> +      - const: axiwr
> +      - const: mipi_rx0_pxl
> +      - const: ispcore_2x
> +      - const: isp_axi
> +
> +  resets:
> +    maxItems: 6
> +
> +  reset-names:
> +    items:
> +      - const: wrapper_p
> +      - const: wrapper_c
> +      - const: axird
> +      - const: axiwr
> +      - const: isp_top_n
> +      - const: isp_top_axi
> +
> +  power-domains:
> +    items:
> +      - description: JH7110 ISP Power Domain Switch Controller.
> +
> +  interrupts:
> +    maxItems: 4
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description: Input port for receiving DVP data.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              bus-width:
> +                const: 8
> +
> +              data-shift:
> +                const: 2

As far as I can tell, those two properties are not handled by the
driver. I assume this is because the driver doesn't support the DVP
input yet. That's fine, but it makes it a bit hard to review the device
tree. Could you provide some information about the DVP hardware
interface ? Does it support both BT.656 and sync signals, or just sync
signals ? Are the polarities of the clock and h/v sync controllable ?
Is the parallel input bus 8-bit wide or are other options supported ?
And finally, what are you modelling with data-shift: 2 ?

> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Input port for receiving CSI data.
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - power-domains
> +  - interrupts
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    isp@19840000 {
> +        compatible = "starfive,jh7110-camss";
> +        reg = <0x19840000 0x10000>,
> +              <0x19870000 0x30000>;
> +        reg-names = "syscon", "isp";
> +        clocks = <&ispcrg 0>,
> +                 <&ispcrg 13>,
> +                 <&ispcrg 2>,
> +                 <&ispcrg 12>,
> +                 <&ispcrg 1>,
> +                 <&syscrg 51>,
> +                 <&syscrg 52>;
> +        clock-names = "apb_func",
> +                      "wrapper_clk_c",
> +                      "dvp_inv",
> +                      "axiwr",
> +                      "mipi_rx0_pxl",
> +                      "ispcore_2x",
> +                      "isp_axi";
> +        resets = <&ispcrg 0>,
> +                 <&ispcrg 1>,
> +                 <&ispcrg 10>,
> +                 <&ispcrg 11>,
> +                 <&syscrg 41>,
> +                 <&syscrg 42>;
> +        reset-names = "wrapper_p",
> +                      "wrapper_c",
> +                      "axird",
> +                      "axiwr",
> +                      "isp_top_n",
> +                      "isp_top_axi";
> +        power-domains = <&pwrc 5>;
> +        interrupts = <92>, <87>, <88>, <90>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            port@0 {
> +                reg = <0>;
> +                vin_from_sc2235: endpoint {
> +                    remote-endpoint = <&sc2235_to_vin>;
> +                    bus-width = <8>;
> +                    data-shift = <2>;
> +                    hsync-active = <1>;
> +                    vsync-active = <0>;
> +                    pclk-sample = <1>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                vin_from_csi2rx: endpoint {
> +                    remote-endpoint = <&csi2rx_to_vin>;
> +                };
> +            };
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index bbb8b5c0187b..b8c76b0d7eb3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19909,6 +19909,13 @@ M:	Ion Badulescu <ionut@xxxxxxxxxx>
>  S:	Odd Fixes
>  F:	drivers/net/ethernet/adaptec/starfire*
>  
> +STARFIVE CAMERA SUBSYSTEM DRIVER
> +M:	Jack Zhu <jack.zhu@xxxxxxxxxxxxxxxx>
> +M:	Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
> +L:	linux-media@xxxxxxxxxxxxxxx
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> +
>  STARFIVE DEVICETREES
>  M:	Emil Renner Berthing <kernel@xxxxxxxx>
>  S:	Maintained

-- 
Regards,

Laurent Pinchart