Re: [net-next PATCH v7 13/16] ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port

[Christian Marangi]

On Wed, Apr 19, 2023 at 02:53:45PM +0200, Krzysztof Kozlowski wrote:
> On 17/04/2023 17:17, Christian Marangi wrote:
> > Add Switch LED for each port for MikroTik RB3011UiAS-RM.
> > 
> > MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips
> > connected.
> > 
> > It was discovered that in the hardware design all 3 Switch LED trace of
> > the related port is connected to the same LED. This was discovered by
> > setting to 'always on' the related led in the switch regs and noticing
> > that all 3 LED for the specific port (for example for port 1) cause the
> > connected LED for port 1 to turn on. As an extra test we tried enabling
> > 2 different LED for the port resulting in the LED turned off only if
> > every led in the reg was off.
> > 
> > Aside from this funny and strange hardware implementation, the device
> > itself have one green LED for each port, resulting in 10 green LED one
> > for each of the 10 supported port.
> > 
> > Cc: Jonathan McDowell <noodles@xxxxxxxx>
> > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 120 ++++++++++++++++++++++
> 
> Please do not send the DTS patches to the net-next, but to the Qualcomm
> SoC maintainers. The DTS must not be mixed with driver code.
> 

Hi,

sorry for the mess, it was asked to give an user of the LED feature for
qca8k so I was a bit confused on where to include it and at the end I
decided to put it in this series.

What was the correct way? 2 different series and reference the DT one in
the net-next? (or not targetting net-next at all?)



-- 
	Ansuel