[PATCH 02/11] drm/msm/dpu: use the actual lm maximum width instead of a hardcoded value

From: Arnaud Vrac
Date: Wed Apr 19 2023 - 10:42:12 EST


This avoids using two LMs instead of one when the display width is lower
than the maximum supported value. For example on MSM8996/MSM8998, the
actual maxwidth is 2560, so we would use two LMs for 1280x720 or
1920x1080 resolutions, while one is enough.

Signed-off-by: Arnaud Vrac <avrac@xxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 1dc5dbe585723..dd2914726c4f6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -53,8 +53,6 @@

#define IDLE_SHORT_TIMEOUT 1

-#define MAX_HDISPLAY_SPLIT 1080
-
/* timeout in frames waiting for frame done */
#define DPU_ENCODER_FRAME_DONE_TIMEOUT_FRAMES 5

@@ -568,10 +566,12 @@ static struct msm_display_topology dpu_encoder_get_topology(
*/
if (intf_count == 2)
topology.num_lm = 2;
- else if (!dpu_kms->catalog->caps->has_3d_merge)
- topology.num_lm = 1;
+ else if (dpu_kms->catalog->caps->has_3d_merge &&
+ dpu_kms->catalog->mixer_count > 0 &&
+ mode->hdisplay > dpu_kms->catalog->mixer[0].sblk->maxwidth)
+ topology.num_lm = 2;
else
- topology.num_lm = (mode->hdisplay > MAX_HDISPLAY_SPLIT) ? 2 : 1;
+ topology.num_lm = 1;

if (crtc_state->ctm)
topology.num_dspp = topology.num_lm;

--
2.40.0