[PATCH 3/4] DO_NOT_MERGE arm64: dts: ti: Add AM62x MCAN MAIN domain transceiver overlay

[Judith Mendez]

Add an overlay for main domain MCAN on AM62x SK. The AM62x
SK board does not have on-board CAN transceiver so instead
of changing the DTB permanently, add an overlay to enable
MAIN domain MCAN and support for 1 CAN transceiver.

Signed-off-by: Judith Mendez <jm@xxxxxx>
---
 arch/arm64/boot/dts/ti/Makefile               |  2 ++
 .../boot/dts/ti/k3-am625-sk-mcan-main.dtso    | 35 +++++++++++++++++++
 2 files changed, 37 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-sk-mcan-main.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index c83c9d772b81..abe15e76b614 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -9,8 +9,10 @@
 # alphabetically.
 
 # Boards with AM62x SoC
+k3-am625-sk-mcan-dtbs := k3-am625-sk.dtb k3-am625-sk-mcan-main.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-mcan.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
 
 # Boards with AM62Ax SoC
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk-mcan-main.dtso b/arch/arm64/boot/dts/ti/k3-am625-sk-mcan-main.dtso
new file mode 100644
index 000000000000..72b68fd51121
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk-mcan-main.dtso
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for MCAN transceiver in main domain on AM625 SK
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pinctrl/k3.h>
+
+&{/} {
+	transceiver1: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+};
+
+&main_pmx0 {
+	main_mcan0_pins_default: main-mcan0-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */
+			AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */
+		>;
+	};
+};
+
+&main_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
-- 
2.17.1