[PATCH] ARM: dts: qcom: msm8974: drop unit addresses from USB phys

[Krzysztof Kozlowski]

The ulpi node does not allow children to have unit address:

  Warning (unit_address_vs_reg): /soc/usb@f9a55000/ulpi/phy@a: node has a unit name, but no reg or ranges property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Actual way of fixing it depends on bindings change, so apply only if
bindings got Acked/Reviewed:
https://lore.kernel.org/linux-devicetree/20230420065051.22994-1-krzysztof.kozlowski@xxxxxxxxxx/T/#u
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 6310f635197f..939449a0c695 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -676,7 +676,7 @@ usb: usb@f9a55000 {
 			#reset-cells = <1>;
 
 			ulpi {
-				usb_hs1_phy: phy@a {
+				usb_hs1_phy: phy-0 {
 					compatible = "qcom,usb-hs-phy-msm8974",
 						     "qcom,usb-hs-phy";
 					#phy-cells = <0>;
@@ -687,7 +687,7 @@ usb_hs1_phy: phy@a {
 					status = "disabled";
 				};
 
-				usb_hs2_phy: phy@b {
+				usb_hs2_phy: phy-1 {
 					compatible = "qcom,usb-hs-phy-msm8974",
 						     "qcom,usb-hs-phy";
 					#phy-cells = <0>;
-- 
2.34.1