Re: [PATCH] drm/probe_helper: fix the warning reported when calling drm_kms_helper_poll_disable during suspend

[Janne Grunau]

On 2023-03-28 10:31:29 +0800, Zongmin Zhou wrote:
> When drivers call drm_kms_helper_poll_disable from
> their device suspend implementation without enabled output polling before,
> following warning will be reported,due to work->func not be initialized:

we see the same warning with the wpork in progress kms driver for apple 
silicon SoCs. The connectors do not need to polled so the driver never 
calls drm_kms_helper_poll_init().
 
> [   55.141361] WARNING: CPU: 3 PID: 372 at kernel/workqueue.c:3066 __flush_work+0x22f/0x240
> [   55.141382] Modules linked in: nls_iso8859_1 snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq intel_rapl_msr intel_rapl_common bochs drm_vram_helper drm_ttm_helper snd_seq_device nfit ttm crct10dif_pclmul snd_timer ghash_clmulni_intel binfmt_misc sha512_ssse3 aesni_intel drm_kms_helper joydev input_leds syscopyarea crypto_simd snd cryptd sysfillrect sysimgblt mac_hid serio_raw soundcore qemu_fw_cfg sch_fq_codel msr parport_pc ppdev lp parport drm ramoops reed_solomon pstore_blk pstore_zone efi_pstore virtio_rng ip_tables x_tables autofs4 hid_generic usbhid hid ahci virtio_net i2c_i801 crc32_pclmul psmouse virtio_scsi libahci i2c_smbus lpc_ich xhci_pci net_failover virtio_blk xhci_pci_renesas failover
> [   55.141430] CPU: 3 PID: 372 Comm: kworker/u16:9 Not tainted 6.2.0-rc6+ #16
> [   55.141433] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
> [   55.141435] Workqueue: events_unbound async_run_entry_fn
> [   55.141441] RIP: 0010:__flush_work+0x22f/0x240
> [   55.141444] Code: 8b 43 28 48 8b 53 30 89 c1 e9 f9 fe ff ff 4c 89 f7 e8 b5 95 d9 00 e8 00 53 08 00 45 31 ff e9 11 ff ff ff 0f 0b e9 0a ff ff ff <0f> 0b 45 31 ff e9 00 ff ff ff e8 e2 54 d8 00 66 90 90 90 90 90 90
> [   55.141446] RSP: 0018:ff59221940833c18 EFLAGS: 00010246
> [   55.141449] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff9b72bcbe
> [   55.141450] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ff3ea01e4265e330
> [   55.141451] RBP: ff59221940833c90 R08: 0000000000000000 R09: 8080808080808080
> [   55.141453] R10: ff3ea01e42b3caf4 R11: 000000000000000f R12: ff3ea01e4265e330
> [   55.141454] R13: 0000000000000001 R14: ff3ea01e505e5e80 R15: 0000000000000001
> [   55.141455] FS:  0000000000000000(0000) GS:ff3ea01fb7cc0000(0000) knlGS:0000000000000000
> [   55.141456] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   55.141458] CR2: 0000563543ad1546 CR3: 000000010ee82005 CR4: 0000000000771ee0
> [   55.141464] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [   55.141465] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [   55.141466] PKRU: 55555554
> [   55.141467] Call Trace:
> [   55.141469]  <TASK>
> [   55.141472]  ? pcie_wait_cmd+0xdf/0x220
> [   55.141478]  ? mptcp_seq_show+0xe0/0x180
> [   55.141484]  __cancel_work_timer+0x124/0x1b0
> [   55.141487]  cancel_delayed_work_sync+0x17/0x20
> [   55.141490]  drm_kms_helper_poll_disable+0x26/0x40 [drm_kms_helper]
> [   55.141516]  drm_mode_config_helper_suspend+0x25/0x90 [drm_kms_helper]
> [   55.141531]  ? __pm_runtime_resume+0x64/0x90
> [   55.141536]  bochs_pm_suspend+0x16/0x20 [bochs]
> [   55.141540]  pci_pm_suspend+0x8b/0x1b0
> [   55.141545]  ? __pfx_pci_pm_suspend+0x10/0x10
> [   55.141547]  dpm_run_callback+0x4c/0x160
> [   55.141550]  __device_suspend+0x14c/0x4c0
> [   55.141553]  async_suspend+0x24/0xa0
> [   55.141555]  async_run_entry_fn+0x34/0x120
> [   55.141557]  process_one_work+0x21a/0x3f0
> [   55.141560]  worker_thread+0x4e/0x3c0
> [   55.141563]  ? __pfx_worker_thread+0x10/0x10
> [   55.141565]  kthread+0xf2/0x120
> [   55.141568]  ? __pfx_kthread+0x10/0x10
> [   55.141570]  ret_from_fork+0x29/0x50
> [   55.141575]  </TASK>
> [   55.141575] ---[ end trace 0000000000000000 ]---
> 
> Fixes: a4e771729a51 ("drm/probe_helper: sort out poll_running vs poll_enabled")
> Signed-off-by: Zongmin Zhou<zhouzongmin@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/drm_probe_helper.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index 8127be134c39..ac72b18e2257 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -855,7 +855,8 @@ void drm_kms_helper_poll_disable(struct drm_device *dev)
>  	if (dev->mode_config.poll_running)
>  		drm_kms_helper_disable_hpd(dev);
>  
> -	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
> +	if (dev->mode_config.poll_enabled)
> +		cancel_delayed_work_sync(&dev->mode_config.output_poll_work);

Checking for dev->mode_config.poll_enabled at the start of the function 
and return early if it is not true looks more in style with the rest of 
drm_probe_helper.c.

No difference functionally of course. Tested with the apple kms driver.

Reviewed-by: Janne Grunau <j@xxxxxxxxxx>

ciao
Janne