Re: [PATCH v2 1/4] spi: s3c64xx: changed to PIO mode if there is no DMA

[Jaewon Kim]

Hi Andi,


On 23. 4. 20. 00:46, Andi Shyti wrote:
> Hi Jaewon,
>
> On Wed, Apr 19, 2023 at 03:06:36PM +0900, Jaewon Kim wrote:
>> Polling mode supported with qurik if there was no DMA in the SOC.
> I think you want to say here that "Through quirks we choose to
> use polling mode whenever there is no DMA in the SoC".
>
>> However, there are cased where we cannot or do not want to use DMA.
> /cased/cases/
>
>> To support this case, if DMA is not set, it is switched to polling mode.
> You haven't really described what you are doing here... you could
> just write something like: "Use DTS properties to select wether
> to use polling or DMA mode."
>
> Side note, please use the imperative form when you want to
> describe what you have done to fix the issue.


Thanks for guide.

I will change description in v3.


>
>> Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
>> ---
>>   drivers/spi/spi-s3c64xx.c                 | 8 ++++++--
>>   include/linux/platform_data/spi-s3c64xx.h | 1 +
>>   2 files changed, 7 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
>> index 71d324ec9a70..273aa02322d9 100644
>> --- a/drivers/spi/spi-s3c64xx.c
>> +++ b/drivers/spi/spi-s3c64xx.c
>> @@ -19,7 +19,6 @@
>>   #include <linux/platform_data/spi-s3c64xx.h>
>>   
>>   #define MAX_SPI_PORTS		12
>> -#define S3C64XX_SPI_QUIRK_POLL		(1 << 0)
>>   #define S3C64XX_SPI_QUIRK_CS_AUTO	(1 << 1)
>>   #define AUTOSUSPEND_TIMEOUT	2000
>>   
>> @@ -116,7 +115,7 @@
>>   #define S3C64XX_SPI_TRAILCNT		S3C64XX_SPI_MAX_TRAILCNT
>>   
>>   #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
>> -#define is_polling(x)	(x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL)
>> +#define is_polling(x)	(x->cntrlr_info->polling)
>>   
>>   #define RXBUSY    (1<<2)
>>   #define TXBUSY    (1<<3)
>> @@ -1067,6 +1066,11 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
>>   		sci->num_cs = temp;
>>   	}
>>   
>> +	if (!of_find_property(dev->of_node, "dmas", NULL)) {
>> +		dev_warn(dev, "cannot find DMA, changed to PIO mode\n");
>> +		sci->polling = 1;
> 	sci->polling = true;
>
> But it could be even better:
>
> 	sci->polling = !of_find_property(dev->of_node, "dmas", NULL));
>
> and you get rid of the dev_warn() that is not required.
>
> Andi


Okay, I will change 1 to 'true'..


Thanks

Jaewon Kim