[PATCH 2/4] pinctrl: amd: Fix mistake in handling clearing pins at startup

[Mario Limonciello]

commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe")
had a mistake in loop iteration 63 that it would clear offset 0xFC instead
of 0x100.  Offset 0xFC is actually `WAKE_INT_MASTER_REG`.  This was
clearing bits 13 and 15 from the register which significantly changed the
expected handling for some platforms for GPIO0.

Cc: stable@xxxxxxxxxxxxxxx
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
---
 drivers/pinctrl/pinctrl-amd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 6b9ae92017d4..24465010397b 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -897,9 +897,9 @@ static void amd_gpio_irq_init(struct amd_gpio *gpio_dev)
 
 		raw_spin_lock_irqsave(&gpio_dev->lock, flags);
 
-		pin_reg = readl(gpio_dev->base + i * 4);
+		pin_reg = readl(gpio_dev->base + pin * 4);
 		pin_reg &= ~mask;
-		writel(pin_reg, gpio_dev->base + i * 4);
+		writel(pin_reg, gpio_dev->base + pin * 4);
 
 		raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
 	}
-- 
2.34.1