Re: [PATCH] overlayfs: Trigger file re-evaluation by IMA / EVM after writes

[Mimi Zohar]

On Tue, 2023-04-11 at 10:38 +0200, Christian Brauner wrote:
> On Sun, Apr 09, 2023 at 06:12:09PM -0400, Jeff Layton wrote:
> > On Sun, 2023-04-09 at 17:22 +0200, Christian Brauner wrote:
> > > On Fri, Apr 07, 2023 at 09:29:29AM -0400, Jeff Layton wrote:
> > > > > > > > 
> > > > > > > > I would ditch the original proposal in favor of this 2-line patch shown here:
> > > > > > > > 
> > > > > > > > https://lore.kernel.org/linux-integrity/a95f62ed-8b8a-38e5-e468-ecbde3b221af@xxxxxxxxxxxxx/T/#m3bd047c6e5c8200df1d273c0ad551c645dd43232
> > > > > 
> > > > > We should cool it with the quick hacks to fix things. :)
> > > > > 
> > > > 
> > > > Yeah. It might fix this specific testcase, but I think the way it uses
> > > > the i_version is "gameable" in other situations. Then again, I don't
> > > > know a lot about IMA in this regard.
> > > > 
> > > > When is it expected to remeasure? If it's only expected to remeasure on
> > > > a close(), then that's one thing. That would be a weird design though.
> > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > 
> > > > > > > Ok, I think I get it. IMA is trying to use the i_version from the
> > > > > > > overlayfs inode.
> > > > > > > 
> > > > > > > I suspect that the real problem here is that IMA is just doing a bare
> > > > > > > inode_query_iversion. Really, we ought to make IMA call
> > > > > > > vfs_getattr_nosec (or something like it) to query the getattr routine in
> > > > > > > the upper layer. Then overlayfs could just propagate the results from
> > > > > > > the upper layer in its response.
> > > > > > > 
> > > > > > > That sort of design may also eventually help IMA work properly with more
> > > > > > > exotic filesystems, like NFS or Ceph.
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > 
> > > > > > Maybe something like this? It builds for me but I haven't tested it. It
> > > > > > looks like overlayfs already should report the upper layer's i_version
> > > > > > in getattr, though I haven't tested that either:
> > > > > > 
> > > > > > -----------------------8<---------------------------
> > > > > > 
> > > > > > [PATCH] IMA: use vfs_getattr_nosec to get the i_version
> > > > > > 
> > > > > > IMA currently accesses the i_version out of the inode directly when it
> > > > > > does a measurement. This is fine for most simple filesystems, but can be
> > > > > > problematic with more complex setups (e.g. overlayfs).
> > > > > > 
> > > > > > Make IMA instead call vfs_getattr_nosec to get this info. This allows
> > > > > > the filesystem to determine whether and how to report the i_version, and
> > > > > > should allow IMA to work properly with a broader class of filesystems in
> > > > > > the future.
> > > > > > 
> > > > > > Reported-by: Stefan Berger <stefanb@xxxxxxxxxxxxx>
> > > > > > Signed-off-by: Jeff Layton <jlayton@xxxxxxxxxx>
> > > > > > ---
> > > > > 
> > > > > So, I think we want both; we want the ovl_copyattr() and the
> > > > > vfs_getattr_nosec() change:
> > > > > 
> > > > > (1) overlayfs should copy up the inode version in ovl_copyattr(). That
> > > > >     is in line what we do with all other inode attributes. IOW, the
> > > > >     overlayfs inode's i_version counter should aim to mirror the
> > > > >     relevant layer's i_version counter. I wouldn't know why that
> > > > >     shouldn't be the case. Asking the other way around there doesn't
> > > > >     seem to be any use for overlayfs inodes to have an i_version that
> > > > >     isn't just mirroring the relevant layer's i_version.
> > > > 
> > > > It's less than ideal to do this IMO, particularly with an IS_I_VERSION
> > > > inode.
> > > > 
> > > > You can't just copy up the value from the upper. You'll need to call
> > > > inode_query_iversion(upper_inode), which will flag the upper inode for a
> > > > logged i_version update on the next write. IOW, this could create some
> > > > (probably minor) metadata write amplification in the upper layer inode
> > > > with IS_I_VERSION inodes.
> > > 
> > > I'm likely just missing context and am curious about this so bear with me. Why
> > > do we need to flag the upper inode for a logged i_version update? Any required
> > > i_version interactions should've already happened when overlayfs called into
> > > the upper layer. So all that's left to do is for overlayfs' to mirror the
> > > i_version value after the upper operation has returned.
> > 
> > > ovl_copyattr() - which copies the inode attributes - is always called after the
> > > operation on the upper inode has finished. So the additional query seems odd at
> > > first glance. But there might well be a good reason for it. In my naive
> > > approach I would've thought that sm along the lines of:
> > >
> > > diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c
> > > index 923d66d131c1..8b089035b9b3 100644
> > > --- a/fs/overlayfs/util.c
> > > +++ b/fs/overlayfs/util.c
> > > @@ -1119,4 +1119,5 @@ void ovl_copyattr(struct inode *inode)
> > >         inode->i_mtime = realinode->i_mtime;
> > >         inode->i_ctime = realinode->i_ctime;
> > >         i_size_write(inode, i_size_read(realinode));
> > > +       inode_set_iversion_raw(inode, inode_peek_iversion_raw(realinode));
> > >  }
> > > 
> > > would've been sufficient.
> > > 
> > 
> > Nope, because then you wouldn't get any updates to i_version after that
> > point.
> > 
> > Note that with an IS_I_VERSION inode we only update the i_version when
> > there has been a query since the last update. What you're doing above is
> > circumventing that mechanism. You'll get the i_version at the time of of
> > the ovl_copyattr, but there won't be any updates of it after that point
> > because the QUERIED bit won't end up being set on realinode.
> 
> I get all that.
> But my understanding had been that the i_version value at the time of
> ovl_copyattr() would be correct. Because when ovl_copyattr() is called
> the expected i_version change will have been done in the relevant layer
> includig raising the QUERIED bit. Since the layers are not allowed to be
> changed outside of the overlayfs mount any change to them can only
> originate from overlayfs which would necessarily call ovl_copyattr()
> again. IOW, overlayfs would by virtue of its implementation keep the
> i_version value in sync.
> 
> Overlayfs wouldn't even raise SB_I_VERSION. It would indeed just be a
> cache of i_version of the relevant layer.
> 
> > 
> > 
> > > Since overlayfs' does explicitly disallow changes to the upper and lower trees
> > > while overlayfs is mounted it seems intuitive that it should just mirror the
> > > relevant layer's i_version.
> > >
> > >
> > > If we don't do this, then we should probably document that i_version doesn't
> > > have a meaning yet for the inodes of stacking filesystems.
> > > 
> > 
> > Trying to cache the i_version is counterproductive, IMO, at least with
> > an IS_I_VERSION inode.
> > 
> > The problem is that a query against the i_version has a side-effect. It
> > has to (atomically) mark the inode for an update on the next change.
> > 
> > If you try to cache that value, you'll likely end up doing more queries
> > than you really need to (because you'll need to keep the cache up to
> > date) and you'll have an i_version that will necessarily lag the one in
> > the upper layer inode.
> > 
> > The whole point of the change attribute is to get the value as it is at
> > this very moment so we can check whether there have been changes. A
> > laggy value is not terribly useful.
> > 
> > Overlayfs should just always call the upper layer's ->getattr to get the
> > version. I wouldn't even bother copying it up in the first place. Doing
> > so is just encouraging someone to try use the value in the overlayfs
> > inode, when they really need to go through ->getattr and get the one
> > from the upper layer.
> 
> That seems reasonable to me. I read this as an agreeing with my earlier
> suggestion to document that i_version doesn't have a meaning for the
> inodes of stacking filesystems and that we should spell out that
> vfs_getattr()/->getattr() needs to be used to interact with i_version.
> 
> We need to explain to subsystems such as IMA somwhere what the correct
> way to query i_version agnostically is; independent of filesystem
> implementation details.
> 
> Looking at IMA, it queries the i_version directly without checking
> whether it's an IS_I_VERSION() inode first. This might make a
> difference.h
> 
> Afaict, filesystems that persist i_version to disk automatically raise
> SB_I_VERSION. I would guess that it be considered a bug if a filesystem
> would persist i_version to disk and not raise SB_I_VERSION. If so IMA
> should probably be made to check for IS_I_VERSION() and it will probably
> get that by switching to vfs_getattr_nosec().

When the filesystem isn't mounted with I_VERSION, i_version should be
set to 0.

Originally when the filesytem wasn't mounted with I_VERSION support,
the file would only be measured once.  With commit ac0bf025d2c0 ("ima:
Use i_version only when filesystem supports it"), this changed.   The
"iint" flags are reset, causing the file to be re-
{measure/appraised/audited} on next access.

-- 
thanks,

Mimi