Re: [PATCH v1] watchdog: starfive: Fix the probe return error if PM and early_enable are both disabled
From: Xingyu Wu
Date: Tue Apr 25 2023 - 22:45:30 EST
On 2023/4/26 10:01, Guenter Roeck wrote:
> On 4/25/23 18:49, Xingyu Wu wrote:
>> On 2023/4/25 22:06, Guenter Roeck wrote:
>>> On 4/25/23 03:04, Xingyu Wu wrote:
>>>> When the starfive watchdog driver uses 'pm_runtime_put_sync()' as probe
>>>> return value at last and 'early_enable' is disabled, it could return the
>>>> error '-ENOSYS' if the CONFIG_PM is disabled, but the driver should works
>>>> normally.
>>>>
>>>> Add a check to make sure the PM is enabled and then use
>>>> 'pm_runtime_put_sync()' as return value when 'early_enable' is disabled.
>>>>
>>>> Fixes: db728ea9c7be ("drivers: watchdog: Add StarFive Watchdog driver")
>>>> Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
>>>> ---
>>>>
>>>> Hi, Guenter and Wim,
>>>>
>>>> This patch fixes the issue of StarFive watchdog driver and rebases on
>>>> the master branch of linux-next.
>>>>
>>>> Thanks.
>>>> ---
>>>> drivers/watchdog/starfive-wdt.c | 3 ++-
>>>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/watchdog/starfive-wdt.c b/drivers/watchdog/starfive-wdt.c
>>>> index 1995cceca51e..51e487e09960 100644
>>>> --- a/drivers/watchdog/starfive-wdt.c
>>>> +++ b/drivers/watchdog/starfive-wdt.c
>>>> @@ -492,7 +492,8 @@ static int starfive_wdt_probe(struct platform_device *pdev)
>>>> goto err_exit;
>>>> if (!early_enable)
>>>> - return pm_runtime_put_sync(&pdev->dev);
>>>> + if (pm_runtime_enabled(&pdev->dev))
>>>> + return pm_runtime_put_sync(&pdev->dev);
>>>>
>>>
>>> Why not just
>>>
>>> if (!early_enable)
>>> pm_runtime_put_sync(&pdev->dev)
>>>
>>> like almost every other caller of pm_runtime_put_sync() ?
>>>
>>
>> The function of pm_runtime_put_sync() is that:
>>
>> static inline int pm_runtime_put_sync(struct device *dev)
>> {
>> return __pm_runtime_idle(dev, RPM_GET_PUT);
>> }
>>
>> and when do not enable CONFIG_PM, the __pm_runtime_idle() is that:
>>
>> static inline int __pm_runtime_idle(struct device *dev, int rpmflags)
>> {
>> return -ENOSYS;
>> }
>>
>> If I do not open PM, it will return error saying probe failed
>> but it works fine without PM. I had tested that and probe really
>> was failed. So I should add this check before using pm_runtime_put_sync().
>>
>
> You did not answer my question.
>
Oh sorry, I did not notice that you dropped the 'return'. It looks simpler.
Best regards,
Xingyu Wu