Re: [PATCH 1/4] platform/x86: think-lmi: Enable opcode support on BIOS settings

[Mark Pearson]

Hi Hans,

On Tue, May 23, 2023, at 8:36 AM, Mark Pearson wrote:
> Thanks Hans,
>
> On Tue, May 23, 2023, at 6:46 AM, Hans de Goede wrote:
>> Hi Mark,
>>
>> On 5/17/23 20:19, Mark Pearson wrote:
>>> Whilst reviewing some documentation from the FW team on using WMI on
>>> Lenovo system I noticed that we weren't using Opcode support when
>>> changing BIOS settings in the thinkLMI driver.
>>> 
>>> We should be doing this to ensure we're future proof as the old
>>> non-opcode mechanism has been deprecated.
>>> 
>>> Tested on X1 Carbon G10 and G11.
>>> 
>>> Signed-off-by: Mark Pearson <mpearson-lenovo@xxxxxxxxx>
>>> ---
>>>  drivers/platform/x86/think-lmi.c | 23 ++++++++++++++++++++++-
>>>  1 file changed, 22 insertions(+), 1 deletion(-)
>>> 
>>> diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/think-lmi.c
>>> index 1138f770149d..d9341305eba9 100644
>>> --- a/drivers/platform/x86/think-lmi.c
>>> +++ b/drivers/platform/x86/think-lmi.c
>>> @@ -1001,7 +1001,28 @@ static ssize_t current_value_store(struct kobject *kobj,
>>>  				tlmi_priv.pwd_admin->save_signature);
>>>  		if (ret)
>>>  			goto out;
>>
>>> -	} else { /* Non certiifcate based authentication */
>>> +	} else if (tlmi_priv.opcode_support) {
>>> +		/* If opcode support is present use that interface */
>>> +		set_str = kasprintf(GFP_KERNEL, "%s,%s;", setting->display_name,
>>> +					new_setting);
>>> +		if (!set_str) {
>>> +			ret = -ENOMEM;
>>> +			goto out;
>>> +		}
>>> +
>>> +		ret = tlmi_simple_call(LENOVO_SET_BIOS_SETTINGS_GUID, set_str);
>>> +		if (ret)
>>> +			goto out;
>>> +
>>> +		if (tlmi_priv.pwd_admin->valid && tlmi_priv.pwd_admin->password[0]) {
>>> +			ret = tlmi_opcode_setting("WmiOpcodePasswordAdmin",
>>> +					tlmi_priv.pwd_admin->password);
>>> +			if (ret)
>>> +				goto out;
>>> +		}
>>> +
>>> +		ret = tlmi_save_bios_settings("");
>>
>> I'm a bit confused about how this works. You are calling the same
>> LENOVO_SET_BIOS_SETTINGS_GUID as the old non opcode based authentication method
>> without any auth string.
>>
>> And then afterwards you are calling LENOVO_OPCODE_IF_GUID with
>> "WmiOpcodePasswordAdmin:<passwd>"
>>
>> Won't the initial LENOVO_SET_BIOS_SETTINGS_GUID get rejected since
>> it does not include an auth-string and you have not authenticated
>> yet using the opcode mechanism either. IOW shouldn't the opcode
>> auth call go first ?
>>
>> And how does this work timing wise, vs races with userspace doing
>> multiple sysfs writes at once.
>>
>> If the authentication done afterwards really acks the last
>> LENOVO_SET_BIOS_SETTINGS_GUID call then a userspace based
>> attacker could try to race and overwrite the last
>> LENOVO_SET_BIOS_SETTINGS_GUID call before the ack happens... ?
>>
>> If this code really is correct I think we need to introduce
>> a mutex to avoid this race.
>>
>> And this also needs some comments to explain what is going on.
>
> Agreed - and looking at it now....I'm questioning it myself. This was 
> tested so it works...but I wonder if that was more luck than judgement.
> Let me do some checking - I think I may have messed up here.
>

Looked at this and the code is correct - even if it is a bit weird :)
https://docs.lenovocdrt.com/#/bios/wmi/wmi_guide?id=set-and-save-a-bios-setting-on-newer-models

The save_bios_settings would fail if a password was not set (if it's required).

With regards to race conditions - that does seem somewhat unlikely in real life but I can add a mutex around this to catch that condition. I think I should probably do the same in a couple of other places (e.g. certificate_store and new_password_store) where multiple WMI calls are needed to complete an operation. 

Is it OK if I do that as a separate commit on the end of the series or would you rather it was included in this commit? As the scope is, I think, more than just this function I'm leaning towards a separate commit but let me know what best practice is.

Thanks
Mark