[PATCH tty v1 6/8] serial: 8250: lock port for omap8250_restore_regs()

[John Ogness]

omap8250_restore_regs() accesses UART_IER. This register is
modified twice by each console write (serial8250_console_write())
under the port lock. However, not all calls to omap8250_restore_regs()
are under the port lock.

Add the missing port locking around omap8250_restore_regs() calls. Add
lockdep notation to the omap8250_restore_regs().

Note that this is not fixing a real problem because the serial devices
are resumed before console printing is enabled.

However, adding this locking allows for clean locking semantics
for omap8250_restore_regs() so that lockdep can be used to identify
possible problems in the future. It also simplifies synchronization
of UART_IER in general by not needing to rely on such implementation
details.

Signed-off-by: John Ogness <john.ogness@xxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_omap.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 3cb9cfa62331..34939462fd69 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -309,6 +309,9 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	struct uart_8250_dma	*dma = up->dma;
 	u8 mcr = serial8250_in_MCR(up);
 
+	/* Port locked to synchronize UART_IER access against the console. */
+	lockdep_assert_held_once(&up->port.lock);
+
 	if (dma && dma->tx_running) {
 		/*
 		 * TCSANOW requests the change to occur immediately however if
@@ -1739,8 +1742,11 @@ static int omap8250_runtime_resume(struct device *dev)
 	if (priv->line >= 0)
 		up = serial8250_get_port(priv->line);
 
-	if (up && omap8250_lost_context(up))
+	if (up && omap8250_lost_context(up)) {
+		spin_lock_irq(&up->port.lock);
 		omap8250_restore_regs(up);
+		spin_unlock_irq(&up->port.lock);
+	}
 
 	if (up && up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2)) {
 		spin_lock_irq(&up->port.lock);
-- 
2.30.2