Re: [PATCH v3] firmware: qcom_scm: Clear download bit during reboot

[Robert Marko]

On Tue, 23 May 2023 at 11:42, Mukesh Ojha <quic_mojha@xxxxxxxxxxx> wrote:
>
>
>
> On 5/22/2023 3:34 PM, Robert Marko wrote:
> > On Mon, 22 May 2023 at 11:26, Robert Marko <robimarko@xxxxxxxxx> wrote:
> >>
> >> On Mon, 22 May 2023 at 11:11, Mukesh Ojha <quic_mojha@xxxxxxxxxxx> wrote:
> >>>
> >>>
> >>>
> >>> On 5/22/2023 2:29 PM, Robert Marko wrote:
> >>>> On Mon, 22 May 2023 at 08:11, Mukesh Ojha <quic_mojha@xxxxxxxxxxx> wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>> On 5/18/2023 3:45 PM, Robert Marko wrote:
> >>>>>>
> >>>>>> On 16. 03. 2023. 16:14, Mukesh Ojha wrote:
> >>>>>>> During normal restart of a system download bit should
> >>>>>>> be cleared irrespective of whether download mode is
> >>>>>>> set or not.
> >>>>>>>
> >>>>>>> Fixes: 8c1b7dc9ba22 ("firmware: qcom: scm: Expose download-mode control")
> >>>>>>> Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
> >>>>>>
> >>>>>> Hi, this has been backported to 5.15.111, however it seems to be
> >>>>>> breaking reboot
> >>>>>> on IPQ4019 by causing the board to then hang in SBL with:
> >>>>>> root@OpenWrt:/# reboot
> >>>>>> root@OpenWrt:/# [   76.473541] device lan1 left promiscuous mode
> >>>>>> [   76.474204] br-lan: port 1(lan1) entered disabled state
> >>>>>> [   76.527975] device lan2 left promiscuous mode
> >>>>>> [   76.530301] br-lan: port 2(lan2) entered disabled state
> >>>>>> [   76.579376] device lan3 left promiscuous mode
> >>>>>> [   76.581698] br-lan: port 3(lan3) entered disabled state
> >>>>>> [   76.638434] device lan4 left promiscuous mode
> >>>>>> [   76.638777] br-lan: port 4(lan4) entered disabled state
> >>>>>> [   76.978489] qca8k-ipq4019 c000000.switch wan: Link is Down
> >>>>>> [   76.978883] device eth0 left promiscuous mode
> >>>>>> [   76.987077] ipqess-edma c080000.ethernet eth0: Link is Down
> >>>>>> [
> >>>>>> Format: Log Type - Time(microsec) - Message - Optional Info
> >>>>>> Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
> >>>>>> S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00123
> >>>>>> S - IMAGE_VARIANT_STRING=DAABANAZA
> >>>>>> S - OEM_IMAGE_VERSION_STRING=CRM
> >>>>>> S - Boot Config, 0x00000021
> >>>>>> S - Reset status Config, 0x00000010
> >>>>>> S - Core 0 Frequency, 0 MHz
> >>>>>> B -       261 - PBL, Start
> >>>>>> B -      1339 - bootable_media_detect_entry, Start
> >>>>>> B -      1679 - bootable_media_detect_success, Start
> >>>>>> B -      1693 - elf_loader_entry, Start
> >>>>>> B -      5076 - auth_hash_seg_entry, Start
> >>>>>> B -      7223 - auth_hash_seg_exit, Start
> >>>>>> B -    578349 - elf_segs_hash_verify_entry, Start
> >>>>>> B -    696356 - PBL, End
> >>>>>> B -    696380 - SBL1, Start
> >>>>>> B -    787236 - pm_device_init, Start
> >>>>>> D -         7 - pm_device_init, Delta
> >>>>>> B -    788701 - boot_flash_init, Start
> >>>>>> D -     52782 - boot_flash_init, Delta
> >>>>>> B -    845625 - boot_config_data_table_init, Start
> >>>>>> D -      3836 - boot_config_data_table_init, Delta - (419 Bytes)
> >>>>>> B -    852841 - clock_init, Start
> >>>>>> D -      7566 - clock_init, Delta
> >>>>>> B -    864883 - CDT version:2,Platform ID:9,Major ID:0,Minor
> >>>>>> ID:0,Subtype:64
> >>>>>> B -    868413 - sbl1_ddr_set_params, Start
> >>>>>> B -    873402 - cpr_init, Start
> >>>>>> D -         2 - cpr_init, Delta
> >>>>>> B -    877842 - Pre_DDR_clock_init, Start
> >>>>>> D -         4 - Pre_DDR_clock_init, Delta
> >>>>>> D -     13234 - sbl1_ddr_set_params, Delta
> >>>>>> B -    891155 - pm_driver_init, Start
> >>>>>> D -         2 - pm_driver_init, Delta
> >>>>>> B -    909105 - Image Load, Start
> >>>>>> B -   1030210 - Boot error ocuured!. Error code: 303d
> >>>>>>
> >>>>>> Reverting the commit fixes rebooting.
> >>>>>
> >>>>> Hi Robert,
> >>>>>
> >>>>> Can you check if disable SDI [1] works with this issue
> >>>>>
> >>>>> https://lore.kernel.org/linux-arm-msm/20230518140224.2248782-1-robimarko@xxxxxxxxx/
> >>>>>
> >>>>> [1]
> >>>>>
> >>>>>
> >>>>> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> >>>>> index fde33acd46b7..01496ceb7136 100644
> >>>>> --- a/drivers/firmware/qcom_scm.c
> >>>>> +++ b/drivers/firmware/qcom_scm.c
> >>>>> @@ -1508,6 +1508,7 @@ static int qcom_scm_probe(struct platform_device
> >>>>> *pdev)
> >>>>>     static void qcom_scm_shutdown(struct platform_device *pdev)
> >>>>>     {
> >>>>>            /* Clean shutdown, disable download mode to allow normal restart */
> >>>>> +       qcom_scm_disable_sdi();
> >>>>>            qcom_scm_set_download_mode(false);
> >>>>>     }
> >>>>
> >>>> Hi,
> >>>> I can confirm reboot works this way as well.
> >>>
> >>> That's great, So, i don't need to revert the patch and you can
> >>> add this in your patch without target specific check ?
> >>
> >> Oh, you mean IPQ4019 not rebooting?
> >> I haven't tested that, give me couple of minutes to try that out.
> >> Cause, the link was just back to the SDI patchset.
> >
> > And, I can confirm that IPQ4019 does not reboot even with SDI disabled if dload
> > mode was set so it still needs a revert.
>
> Ok, So, before we go for revert of the change.
>
> - How do you generally collect the ram dump on your device on crash ?
>    did you check if you get any error when qcom_scm_set_download_mode()
>    get called.

Hi,
Unfortunately, I dont have a way to collect the RAM dump in this case.

I checked and __qcom_scm_set_dload_mode returns 0 and there are no
errors.

Regards,
Robert
>
>
> -- Mukesh
>
> >
> > Regards,
> > Robert
> >>
> >> Regards,
> >> Robert
> >>>
> >>> -- Mukesh
> >>>
> >>>>
> >>>> Regards,
> >>>> Robert
> >>>>>
> >>>>>
> >>>>> -- Mukesh
> >>>>>
> >>>>>>
> >>>>>> Regards,
> >>>>>> Robert
> >>>>>>
> >>>>>>> ---
> >>>>>>> Changes in v3:
> >>>>>>>      - Added Fixes tag.
> >>>>>>>      - Removed it from below patch series, as it makes sense to go this
> >>>>>>> independently.
> >>>>>>>
> >>>>>>> https://lore.kernel.org/lkml/1677664555-30191-1-git-send-email-quic_mojha@xxxxxxxxxxx/
> >>>>>>>
> >>>>>>> Changes in v2:
> >>>>>>>      - No change.
> >>>>>>>
> >>>>>>>     drivers/firmware/qcom_scm.c | 3 +--
> >>>>>>>     1 file changed, 1 insertion(+), 2 deletions(-)
> >>>>>>>
> >>>>>>> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> >>>>>>> index 468d4d5..3e020d1 100644
> >>>>>>> --- a/drivers/firmware/qcom_scm.c
> >>>>>>> +++ b/drivers/firmware/qcom_scm.c
> >>>>>>> @@ -1506,8 +1506,7 @@ static int qcom_scm_probe(struct platform_device
> >>>>>>> *pdev)
> >>>>>>>     static void qcom_scm_shutdown(struct platform_device *pdev)
> >>>>>>>     {
> >>>>>>>         /* Clean shutdown, disable download mode to allow normal restart */
> >>>>>>> -    if (download_mode)
> >>>>>>> -        qcom_scm_set_download_mode(false);
> >>>>>>> +    qcom_scm_set_download_mode(false);
> >>>>>>>     }
> >>>>>>>     static const struct of_device_id qcom_scm_dt_match[] = {