[PATCH v2 1/5] dt-bindings: input: cirrus,cs40l26: Support for CS40L26

[Fred Treven]

Introduce required basic devicetree parameters for the
initial commit of CS40L26.

Signed-off-by: Fred Treven <fred.treven@xxxxxxxxxx>
---
 .../devicetree/bindings/input/cirrus,cs40l26.yaml  | 102 +++++++++++++++++++++
 MAINTAINERS                                        |  10 ++
 2 files changed, 112 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/cirrus,cs40l26.yaml

diff --git a/Documentation/devicetree/bindings/input/cirrus,cs40l26.yaml b/Documentation/devicetree/bindings/input/cirrus,cs40l26.yaml
new file mode 100644
index 000000000000..9cbc964ebded
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cirrus,cs40l26.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cirrus,cs40l26.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS40L26 Boosted Haptic Amplifier
+
+maintainers:
+  - Fred Treven <fred.treven@xxxxxxxxxx>
+
+description:
+  CS40L26 is a Boosted Haptic Driver with Integrated DSP and Waveform Memory
+  with Advanced Closed Loop Algorithms and LRA protection
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs40l26a
+      - cirrus,cs40l26b
+      - cirrus,cs40l27a
+      - cirrus,cs40l27b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  VA-supply:
+    description: Regulator for VA analog voltage
+
+  VP-supply:
+    description: Regulator for VP peak voltage
+
+  cirrus,bst-ipk-microamp:
+    description:
+      Maximum amount of current that can be drawn by the device's boost converter.
+    multipleOf: 50000
+    minimum: 1600000
+    maximum: 4800000
+    default: 4500000
+
+  cirrus,bst-ctl-microvolt:
+    description: Maximum target voltage to which DSP may increase the VBST supply.
+    multipleOf: 50000
+    minimum: 2550000
+    maximum: 11000000
+    default: 11000000
+
+  cirrus,bst-exploratory-mode-disable:
+    description:
+      Disable boost exploratory mode.
+
+      In exploratory mode the analog maximum peak current limit of 4.5 A
+      (tolerance of + 160 mA) will be applied. This is required for the
+      device to successfully detect a boost inductor short.
+
+      Boost exploratory mode allows the device to overshoot the set boost peak
+      current limit (i.e. if current peak limit is set to 2.5 A to protect the
+      battery inductor, the current limit will be opened up to 4.5 A for
+      several milliseconds at boost startup).
+      This has potential to damage the boost inductor.
+
+      Disabling this mode will prevent this from happening; it will also
+      prevent the device from detecting boost inductor short errors.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs40l26@58 {
+        compatible = "cirrus,cs40l26a";
+        reg = <0x58>;
+        interrupt-parent = <&gpio>;
+        interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+        VA-supply = <&dummy_vreg>;
+        VP-supply = <&dummy_vreg>;
+        cirrus,bst-ctl-microvolt = <2600000>;
+        cirrus,bst-ipk-microamp = <1650000>;
+        cirrus,bst-exploratory-mode-disable;
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 2b073facf399..d72ed4957b0b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4926,6 +4926,16 @@ L:	netdev@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	drivers/net/ethernet/cirrus/ep93xx_eth.c
 
+CIRRUS LOGIC HAPTICS DRIVER
+M:	Fred Treven <fred.treven@xxxxxxxxxx>
+M:	Ben Bright <ben.bright@xxxxxxxxxx>
+M:	James Ogletree <james.ogletree@xxxxxxxxxx>
+L:	patches@xxxxxxxxxxxxxxxxxxxxx
+S:	Supported
+W:	https://github.com/CirrusLogic/linux-drivers/wiki
+T:	git https://github.com/CirrusLogic/linux-drivers.git
+F:	Documentation/devicetree/bindings/input/cirrus,cs40l26.yaml
+
 CIRRUS LOGIC LOCHNAGAR DRIVER
 M:	Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
 M:	Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
-- 
2.7.4