Re: [PATCH V7 0/6] drm: bridge: samsung-dsim: Support variable clocking

[Neil Armstrong]

Hi,

On Thu, 18 May 2023 18:06:20 -0500, Adam Ford wrote:
> This series fixes the blanking pack size and the PMS calculation.  It then
> adds support to allows the DSIM to dynamically DPHY clocks, and support
> non-burst mode while allowing the removal of the hard-coded clock values
> for the PLL for imx8m mini/nano/plus, and it allows the removal of the
> burst-clock device tree entry when burst-mode isn't supported by connected
> devices like an HDMI brige.  In that event, the HS clock is set to the
> value requested by the bridge chip.
> 
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[1/6] drm: bridge: samsung-dsim: fix blanking packet size calculation
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a617b33f7e513f25becf843bc97f8f1658c16337
[2/6] drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=54f1a83c72250b182fa7722b0c5f6eb5e769598d
[3/6] drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=33d8d14c83bf67aa0d262961a6fda9c40f3c1052
[4/6] drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=171b3b1e0f8b8c894f2388e1cf765a56f831ee5e
[5/6] drm: bridge: samsung-dsim: Dynamically configure DPHY timing
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=89691775f5735fca9dc40e119edcbb52a25b9612
[6/6] drm: bridge: samsung-dsim: Support non-burst mode
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=bb0e13b9e223b218c9f242f8d340a332b4381042

-- 
Neil