Re: [PATCH v2 9/9] wifi: ath10k: Use RMW accessors for changing LNKCTL

[Ilpo Järvinen]

On Thu, 25 May 2023, Ilpo Järvinen wrote:

> On Wed, 24 May 2023, Bjorn Helgaas wrote:
> 
> > On Wed, May 17, 2023 at 01:52:35PM +0300, Ilpo Järvinen wrote:
> > > Don't assume that only the driver would be accessing LNKCTL. ASPM
> > > policy changes can trigger write to LNKCTL outside of driver's control.
> > > 
> > > Use RMW capability accessors which does proper locking to avoid losing
> > > concurrent updates to the register value. On restore, clear the ASPMC
> > > field properly.
> > > 
> > > Fixes: 76d870ed09ab ("ath10k: enable ASPM")
> > > Suggested-by: Lukas Wunner <lukas@xxxxxxxxx>
> > > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
> > > Cc: stable@xxxxxxxxxxxxxxx
> > > ---
> > >  drivers/net/wireless/ath/ath10k/pci.c | 9 +++++----
> > >  1 file changed, 5 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
> > > index a7f44f6335fb..9275a672f90c 100644
> > > --- a/drivers/net/wireless/ath/ath10k/pci.c
> > > +++ b/drivers/net/wireless/ath/ath10k/pci.c
> > > @@ -1963,8 +1963,9 @@ static int ath10k_pci_hif_start(struct ath10k *ar)
> > >  	ath10k_pci_irq_enable(ar);
> > >  	ath10k_pci_rx_post(ar);
> > >  
> > > -	pcie_capability_write_word(ar_pci->pdev, PCI_EXP_LNKCTL,
> > > -				   ar_pci->link_ctl);
> > > +	pcie_capability_clear_and_set_word(ar_pci->pdev, PCI_EXP_LNKCTL,
> > > +					   PCI_EXP_LNKCTL_ASPMC,
> > > +					   ar_pci->link_ctl & PCI_EXP_LNKCTL_ASPMC);
> > >  
> > >  	return 0;
> > >  }
> > > @@ -2821,8 +2822,8 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar,
> > >  
> > >  	pcie_capability_read_word(ar_pci->pdev, PCI_EXP_LNKCTL,
> > >  				  &ar_pci->link_ctl);
> > > -	pcie_capability_write_word(ar_pci->pdev, PCI_EXP_LNKCTL,
> > > -				   ar_pci->link_ctl & ~PCI_EXP_LNKCTL_ASPMC);
> > > +	pcie_capability_clear_word(ar_pci->pdev, PCI_EXP_LNKCTL,
> > > +				   PCI_EXP_LNKCTL_ASPMC);
> > 
> > These ath drivers all have the form:
> > 
> >   1) read LNKCTL
> >   2) save LNKCTL value in ->link_ctl
> >   3) write LNKCTL with "->link_ctl & ~PCI_EXP_LNKCTL_ASPMC"
> >      to disable ASPM
> >   4) write LNKCTL with ->link_ctl, presumably to re-enable ASPM
> > 
> > These patches close the hole between 1) and 3) where other LNKCTL
> > updates could interfere, which is definitely a good thing.
> > 
> > But the hole between 1) and 4) is much bigger and still there.  Any
> > update by the PCI core in that interval would be lost.
> 
> Any update to PCI_EXP_LNKCTL_ASPMC field in that interval is lost yes, the 
> updates to _the other fields_ in LNKCTL are not lost.
> 
> I know this might result in drivers/pci/pcie/aspm.c disagreeing what
> the state of the ASPM is (as shown under sysfs) compared with LNKCTL 
> value but the cause can no longer be due racing RMW. Essentially, 4) is 
> seen as an override to what core did if it changed ASPMC in between. 
> Technically, something is still "lost" like you say but for a different 
> reason than this series is trying to fix.
> 
> > Straw-man proposal:
> > 
> >   - Change pci_disable_link_state() so it ignores aspm_disabled and
> >     always disables ASPM even if platform firmware hasn't granted
> >     ownership.  Maybe this should warn and taint the kernel.
> > 
> >   - Change drivers to use pci_disable_link_state() instead of writing
> >     LNKCTL directly.

Now that I took a deeper look into what pci_disable_link_state() and 
pci_enable_link_state() do, I realized they're not really disable/enable 
pair like I had assumed from their names. Disable adds to ->aspm_disable 
and flags are never removed from that because enable does not touch 
aspm_disable at all but has it's own flag variable. This asymmetry looks 
intentional.

So if ath drivers would do pci_disable_link_state() to realize 1)-3), 
there is no way to undo it in 4). It looks as if ath drivers would 
actually want to use pci_enable_link_state() with different state 
parameters to realize what they want to do in 1)-4).

Any suggestion which way I should go with these ath drivers here, use 
pci_enable_link_state()?

(There are other drivers where pci_disable_link_state() is very much valid 
thing to do.)

-- 
 i.
	
> I fully agree that's the direction we should be moving, yes. However, I'm 
> a bit hesitant to take that leap in one step. These drivers currently not 
> only disable ASPM but also re-enable it (assuming we guessed the intent
> right).
> 
> If I directly implement that proposal, ASPM is not going to be re-enabled 
> when PCI core does not allowing it. Could it cause some power related 
> regression?
> 
> My plan is to make another patch series after these to realize exactly 
> what you're proposing. It would allow better to isolate the problems that 
> related to the lack of ASPM.
> 
> I hope this two step approach is an acceptable way forward? I can of 
> course add those patches on top of these if that would be preferrable.