Re: [PATCH v2 2/6] dt-bindings: clock: Add YAML schemas for LPASS AUDIOCC and reset on SC8280XP

[Johan Hovold]

On Thu, May 25, 2023 at 01:29:26PM +0100, Srinivas Kandagatla wrote:
> The LPASS (Low Power Audio Subsystem) Audio clock controller provides reset
> support when it is under the control of Q6DSP.
> 
> Add support for those resets and adds IDs for clients to request the reset.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
>  .../bindings/clock/qcom,sc8280xp-lpasscc.yaml         | 11 +++++++++++
>  include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h     |  5 +++++
>  2 files changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
> index 08a9ae60a365..0557e74d3c3b 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
> @@ -21,6 +21,7 @@ properties:
>  
>    compatible:
>      enum:
> +      - qcom,sc8280xp-lpassaudiocc
>        - qcom,sc8280xp-lpasscc
>  
>    qcom,adsp-pil-mode:
> @@ -45,6 +46,16 @@ required:
>  additionalProperties: false
>  
>  examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,lpasscc-sc8280xp.h>
> +    lpass_audiocc: clock-controller@32a9000 {
> +        compatible = "qcom,sc8280xp-lpassaudiocc";
> +        reg = <0x032a9000 0x1000>;
> +        qcom,adsp-pil-mode;
> +        #reset-cells = <1>;
> +        #clock-cells = <1>;

Nit: #clock before #reset

> +    };
> +
>    - |
>      #include <dt-bindings/clock/qcom,lpasscc-sc8280xp.h>
>      lpasscc: clock-controller@33e0000 {
> diff --git a/include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h b/include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h
> index df800ea2741c..d190d57fc81a 100644
> --- a/include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h
> +++ b/include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h
> @@ -6,6 +6,11 @@
>  #ifndef _DT_BINDINGS_CLK_QCOM_LPASSCC_SC8280XP_H
>  #define _DT_BINDINGS_CLK_QCOM_LPASSCC_SC8280XP_H
>  
> +/* LPASS AUDIO CC CSR */
> +#define LPASS_AUDIO_SWR_RX_CGCR				0
> +#define LPASS_AUDIO_SWR_WSA_CGCR			1
> +#define LPASS_AUDIO_SWR_WSA2_CGCR			2
> +
>  /* LPASS TCSR */
>  #define LPASS_AUDIO_SWR_TX_CGCR				0

Should you have different prefixes for the CSR and TCSR defines?

Looks good to me otherwise:

Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>