Commit ebeb20a9cd3f ("soc: qcom: mdt_loader: Always invoke PAS
mem_setup") dropped the relocate check and made pas_mem_setup run
unconditionally. The code was later moved with commit f4e526ff7e38
("soc: qcom: mdt_loader: Extract PAS operations") to
qcom_mdt_pas_init() effectively losing track of what was actually
done.
The assumption that PAS mem_setup can be done anytime was effectively
wrong, with no good reason and this caused regression on some SoC
that use remoteproc to bringup ath11k. One example is IPQ8074 SoC that
effectively broke resulting in remoteproc silently die and ath11k not
working.
On this SoC FW relocate is not enabled and PAS mem_setup was correctly
skipped in previous kernel version resulting in correct bringup and
function of remoteproc and ath11k.
To fix the regression, reintroduce the relocate check in
qcom_mdt_pas_init() and correctly skip PAS mem_setup where relocate is
not enabled.
Fixes: ebeb20a9cd3f ("soc: qcom: mdt_loader: Always invoke PAS mem_setup")
Tested-by: Robert Marko <robimarko@xxxxxxxxx>
Co-developed-by: Robert Marko <robimarko@xxxxxxxxx>
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
drivers/soc/qcom/mdt_loader.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
index 33dd8c315eb7..46820bcdae98 100644
--- a/drivers/soc/qcom/mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -210,6 +210,7 @@ int qcom_mdt_pas_init(struct device *dev, const struct firmware *fw,
const struct elf32_hdr *ehdr;
phys_addr_t min_addr = PHYS_ADDR_MAX;
phys_addr_t max_addr = 0;
+ bool relocate = false;
size_t metadata_len;
void *metadata;
int ret;
@@ -224,6 +225,9 @@ int qcom_mdt_pas_init(struct device *dev, const struct firmware *fw,
if (!mdt_phdr_valid(phdr))
continue;
+ if (phdr->p_flags & QCOM_MDT_RELOCATABLE)
+ relocate = true;
+
if (phdr->p_paddr < min_addr)
min_addr = phdr->p_paddr;
@@ -246,11 +250,13 @@ int qcom_mdt_pas_init(struct device *dev, const struct firmware *fw,
goto out;
}
- ret = qcom_scm_pas_mem_setup(pas_id, mem_phys, max_addr - min_addr);
- if (ret) {
- /* Unable to set up relocation */
- dev_err(dev, "error %d setting up firmware %s\n", ret, fw_name);
- goto out;
+ if (relocate) {
+ ret = qcom_scm_pas_mem_setup(pas_id, mem_phys, max_addr - min_addr);
+ if (ret) {
+ /* Unable to set up relocation */
+ dev_err(dev, "error %d setting up firmware %s\n", ret, fw_name);
+ goto out;
+ }
}
out: