[PATCH net-next v4 0/6] microchip_t1s: Update on Microchip 10BASE-T1S PHY driver

From: Parthiban Veerasooran
Date: Fri May 26 2023 - 11:23:30 EST

This patch series contain the below updates,
- Fixes on the Microchip LAN8670/1/2 10BASE-T1S PHYs support in the
net/phy/microchip_t1s.c driver.
- Adds support for the Microchip LAN8650/1 Rev.B0 10BASE-T1S Internal
PHYs in the net/phy/microchip_t1s.c driver.

- Updated cover letter contents.
- Modified driver description is more generic as it is common for all the
Microchip 10BASE-T1S PHYs.
- Replaced read-modify-write code with phy_modify_mmd function.
- Moved */ to the same line for the single line comments.
- Changed the type int to u16 for LAN865X Rev.B0 fixup registers
- Changed all the comments starting letter to upper case for the
- Removed return value check of phy_read_mmd and returned directly in the
last line of the function lan865x_revb0_indirect_read.
- Used reverse christmas notation wherever is possible.
- Used FIELD_PREP instead of << in all the places.
- Used 4 byte representation for all the register addresses and values
for consistency.
- Comment for indirect read is modified.
- Implemented "Reset Complete" status polling in config_init.
- Function lan865x_setup_cfgparam is split into multiple functions for
- Reference to AN1760 document is added in the comment.
- Removed interrupt disabling code as it is not needed.
- Provided meaningful macros for the LAN865X Rev.B0 indirect read
registers and control.
- Replaced 0x10 with BIT(4).
- Removed collision detection disable/enable code as it can be done with
a separate patch later.

- Comment for phy_modify_mmd() is extended to indicate that the write is
not required if the register already has the required value.
- Commit message is updated for the not supported hardware revisions
0x0007C160 (Rev.A0) and 0x0007C161 (Rev.B0) since they are never
released to production.
- Commit message is updated to indicate that the Reset Complete interrupt
will be cleared when the STS2 register read is done.
- Corrected the typo in the offset calculation comment.
- Used reverse christmas notation for the local variable declarations.

- Reset complete block comment updated to describe the 5us sleep.
- read-modify-write block comment modified and added reference to AN1699.
- LAN8670/1/2 Rev.B1 and LAN8650/1 Rev.B0 details updated in Kconfig file.
- Removed return value check of lan865x_setup_cfgparam() and returned
directly in the last line of the function lan865x_revb0_config_init.

Parthiban Veerasooran (6):
net: phy: microchip_t1s: modify driver description to be more generic
net: phy: microchip_t1s: replace read-modify-write code with
net: phy: microchip_t1s: update LAN867x PHY supported revision number
net: phy: microchip_t1s: fix reset complete status handling
net: phy: microchip_t1s: remove unnecessary interrupts disabling code
net: phy: microchip_t1s: add support for Microchip LAN865x Rev.B0 PHYs

drivers/net/phy/Kconfig | 5 +-
drivers/net/phy/microchip_t1s.c | 274 ++++++++++++++++++++++++++------
2 files changed, 224 insertions(+), 55 deletions(-)