[PATCH v2 3/3] sh: dma: Correct the number of DMA channels in SH7709

[Artur Rojek]

According to the hardware manual [1], the DMAC found in SH7709 features
only 4 channels.

While at it, also sort the existing targets and clarify that
NR_ONCHIP_DMA_CHANNELS must be a multiply of two.

[1] https://www.renesas.com/us/en/document/mah/sh7709s-group-hardware-manual (p. 373)

Signed-off-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
---

v2: - sort existing targets
    - clarify that the value must be a multiply of two

 arch/sh/drivers/dma/Kconfig | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 7d54f284ce10..382fbb189fcf 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -28,17 +28,19 @@ config SH_DMA_API
 config NR_ONCHIP_DMA_CHANNELS
 	int
 	depends on SH_DMA
-	default "4" if CPU_SUBTYPE_SH7750  || CPU_SUBTYPE_SH7751  || \
-		       CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7091
+	default "4" if CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750  || \
+		       CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7751 || \
+		       CPU_SUBTYPE_SH7091
 	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
 		       CPU_SUBTYPE_SH7760
-	default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780  || \
-			CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7724
+	default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724  || \
+			CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 	default "6"
 	help
 	  This allows you to specify the number of channels that the on-chip
-	  DMAC supports. This will be 4 for SH7750/SH7751/Sh7750S/SH7091 and 8 for the
-	  SH7750R/SH7751R/SH7760, 12 for the SH7723/SH7780/SH7785/SH7724, default is 6.
+	  DMAC supports. This will be 4 for SH7709/SH7750/SH7750S/SH7751/SH7091,
+	  8 for SH7750R/SH7751R/SH7760, and 12 for SH7723/SH7724/SH7780/SH7785.
+	  Default is 6. Must be an even number.
 
 config SH_DMABRG
 	bool "SH7760 DMABRG support"
-- 
2.40.1