RE: [EXT] Re: [PATCH 1/2 v8] dt-bindings: watchdog: marvell GTI system watchdog driver

From: Bharat Bhushan
Date: Mon May 29 2023 - 02:14:48 EST


Please see inline

> -----Original Message-----
> From: Conor Dooley <conor@xxxxxxxxxx>
> Sent: Saturday, May 27, 2023 9:40 PM
> To: Bharat Bhushan <bbhushan2@xxxxxxxxxxx>
> Cc: wim@xxxxxxxxxxxxxxxxxx; linux@xxxxxxxxxxxx; robh+dt@xxxxxxxxxx;
> krzysztof.kozlowski+dt@xxxxxxxxxx; linux-watchdog@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Sunil Kovvuri
> Goutham <sgoutham@xxxxxxxxxxx>
> Subject: Re: [EXT] Re: [PATCH 1/2 v8] dt-bindings: watchdog: marvell GTI system
> watchdog driver
>
> On Sat, May 27, 2023 at 02:53:25PM +0000, Bharat Bhushan wrote:
> > From: Conor Dooley <conor@xxxxxxxxxx>
> > > On Fri, May 26, 2023 at 11:56:25AM +0530, Bharat Bhushan wrote:
>
> > > > +properties:
> > > > + compatible:
> > > > + enum:
> > > > + - marvell,cn9670-wdt
> > > > + - marvell,cn9880-wdt
> > > > + - marvell,cnf9535-wdt
> > > > + - marvell,cn10624-wdt
> > > > + - marvell,cn10308-wdt
> > > > + - marvell,cnf10518-wdt
> > >
> > > static const struct of_device_id gti_wdt_of_match[] = {
> > > { .compatible = "marvell,cn9670-wdt", .data = &match_data_octeontx2},
> > > { .compatible = "marvell,cn9880-wdt", .data = &match_data_octeontx2},
> > > { .compatible = "marvell,cnf9535-wdt", .data = &match_data_octeontx2},
> > > { .compatible = "marvell,cn10624-wdt", .data = &match_data_cn10k},
> > > { .compatible = "marvell,cn10308-wdt", .data = &match_data_cn10k},
> > > { .compatible = "marvell,cnf10518-wdt", .data =
> > > &match_data_cn10k},
> > >
> > > This is a fat hint that you should be using fallback compatibles here.
> > > You even had a fallback setup in your last revision, but you seem to
> > > have removed it alongside the removal of the wildcards. Why did you do
> that?
> >
> > Not sure I understand this comment, Compatible in last version was as below:
> >
> > + properties:
> > + compatible:
> > + oneOf:
> > + - const: marvell,octeontx2-wdt
> > + - items:
> > + - enum:
> > + - marvell,octeontx2-95xx-wdt
> > + - marvell,octeontx2-96xx-wdt
> > + - marvell,octeontx2-98xx-wdt
> > + - const: marvell,octeontx2-wdt
> > + - const: marvell,cn10k-wdt
> > + - items:
> > + - enum:
> > + - marvell,cn10kx-wdt
> > + - marvell,cnf10kx-wdt
> > + - const: marvell,cn10k-wdt
> >
> > By fallback do you mean " const: marvell,cn10k-wdt" and
> > "const: marvell,octeontx2-wdt" ? If yes I removed because "octeontx2"
> > and "cn10k" are soc family name and no a specific soc.
>
> No, I meant that you should permit
> compatible = "marvell,cn9880-wdt", "marvell,cn9670-wdt"; and
> compatible = "marvell,cnf9535-wdt", "marvell,cn9670-wdt"; and
> compatible = "marvell,cn9670-wdt";
> so the driver only needs to contain
> { .compatible = "marvell,cn9670-wdt", .data = &match_data_octeontx2},
> instead of
> { .compatible = "marvell,cn9670-wdt", .data = &match_data_octeontx2},
> { .compatible = "marvell,cn9880-wdt", .data = &match_data_octeontx2},
> { .compatible = "marvell,cnf9535-wdt", .data = &match_data_octeontx2},
>
> Note that using fallback compatibles is separate from using wildcards, and I was
> not suggesting that you go back to wildcards ;)

Fallback you mentioned make code look simple. Is below representation correct for above mentioned fallback?

properties:
compatible:
oneOf:
- const: marvell,cn9670-wdt
- items:
- enum:
- marvell,cn9880-wdt
- marvell,cnf9535-wdt
- const: marvell,cn9670-wdt
- const: marvell,cn10624-wdt
- items:
- enum:
- marvell,cn10308-wdt
- marvell,cnf10518-wdt
- const: marvell,cn10624-wdt


And driver will have
{ .compatible = "marvell,cn9670-wdt", .data = &match_data_octeontx2},
{ .compatible = "marvell,cn10624-wdt", .data = &match_data_cn10k},


Thanks
-Bharat

>
> Cheers,
> Conor.