[PATCH net-next v4 0/7] net: dsa: mv88e6xxx: add 88E6361 support

[Alexis Lothoré]

This series brings initial support for Marvell 88E6361 switch.

MV88E6361 is a 8 ports switch with 5 integrated Gigabit PHYs and 3
2.5Gigabit SerDes interfaces. It is in fact a new variant in the
88E639X/88E6193X/88E6191X family with a subset of existing features:
- port 0: MII, RMII, RGMII, 1000BaseX, 2500BaseX
- port 3 to 7: triple speed internal phys
- port 9 and 10: 1000BaseX, 25000BaseX

Since said family is already well supported in mv88e6xxx driver, adding
initial support for this new switch mostly consists in finding the ID
exposed in its identification register, adding a proper description
in switch description tables in mv88e6xxx driver, and enforcing 88E6361
specificities in mv88e6393x_XXX methods.

- first 4 commits introduce an internal phy offset field for switches which
  have internal phys but not starting from port 0
- 5th commit is a fix on existing switches based on first commits
- 6th commit is a slight modification to prepare 886361 support
- last commit introduces 88E6361 support in 88E6393X family

This initial support has been tested with two samples of a custom board
with the following hardware configuration:
- a main CPU connected to MV88E6361 using port 0 as CPU port
- port 9 wired to a SFP cage
- port 10 wired to a G.Hn transceiver

The following setup was used:
PC <-ethernet-> (copper SFP) - Board 1 - (G.hn) <-phone line(RJ11)-> (G.hn) Board 2

The unit 1 has been configured to bridge SFP port and G.hn port together,
which allowed to successfully ping Board 2 from PC.

Changes since v3:
- fix SoB
- reorder switch id list

Changes since v2:
- add Reviewed-By tags for untouched patches
- remove whitespace
- reorganized some conditions to avoid weird line split

Changes since v1:
- rework mv88e6xxx_port_ppu_updates to use internal helper
- add internal phys offset field to manage switches which do not have
  internal PHYs right on first ports
- fix 88E639X/88E6193X/88E6191X internal phy layout
- enforce 88E6361 features in mv88e6393x_port_set_speed_duplex
- enforce 88E6361 features in mv88e6393x_port_max_speed_mode
- enforce 88E6361 features in mv88e6393x_phylink_get_caps
- add Reviewed-By and Acked-By on untouched patch

Alexis Lothoré (7):
  dt-bindings: net: dsa: marvell: add MV88E6361 switch to compatibility
    list
  net: dsa: mv88e6xxx: pass directly chip structure to
    mv88e6xxx_phy_is_internal
  net: dsa: mv88e6xxx: use mv88e6xxx_phy_is_internal in
    mv88e6xxx_port_ppu_updates
  net: dsa: mv88e6xxx: add field to specify internal phys layout
  net: dsa: mv88e6xxx: fix 88E6393X family internal phys layout
  net: dsa: mv88e6xxx: pass mv88e6xxx_chip structure to
    port_max_speed_mode
  net: dsa: mv88e6xxx: enable support for 88E6361 switch

 .../devicetree/bindings/net/dsa/marvell.txt   |  2 +-
 drivers/net/dsa/mv88e6xxx/chip.c              | 69 ++++++++++++++-----
 drivers/net/dsa/mv88e6xxx/chip.h              | 11 ++-
 drivers/net/dsa/mv88e6xxx/global2.c           |  5 +-
 drivers/net/dsa/mv88e6xxx/port.c              | 26 +++++--
 drivers/net/dsa/mv88e6xxx/port.h              | 13 ++--
 6 files changed, 94 insertions(+), 32 deletions(-)

-- 
2.40.1