Re: [PATCH v3] soc: qcom: ocmem: Add OCMEM hardware version print

[Konrad Dybcio]

On 29.05.2023 10:41, Luca Weiss wrote:
> It might be useful to know what hardware version of the OCMEM block the
> SoC contains. Add a debug print for that.
> 
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
> This patch is depends on [0] but could also be applied in the other
> order, if conflicts are resolved.
> 
> [0] https://lore.kernel.org/linux-arm-msm/20230506-msm8226-ocmem-v1-1-3e24e2724f01@xxxxxxxxx/
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
> Changes in v3:
> - Use %lu instead of %ld for print (Konrad)
> - Re-wrap lines so reading is easier (Konrad)
> - Link to v2: https://lore.kernel.org/r/20230509-ocmem-hwver-v2-1-8c8793a07dfc@xxxxxxxxx
> 
> Changes in v2:
> - Use FIELD_GET macros for getting correct bits from register (take
>   wording from mdp5: major, minor, step which hopefully is sort of
>   accurate)
> - Link to v1: https://lore.kernel.org/r/20230509-ocmem-hwver-v1-1-b83ece3f2168@xxxxxxxxx
> ---
>  drivers/soc/qcom/ocmem.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c
> index c3e78411c637..ef7c1748242a 100644
> --- a/drivers/soc/qcom/ocmem.c
> +++ b/drivers/soc/qcom/ocmem.c
> @@ -76,6 +76,10 @@ struct ocmem {
>  #define OCMEM_REG_GFX_MPU_START			0x00001004
>  #define OCMEM_REG_GFX_MPU_END			0x00001008
>  
> +#define OCMEM_HW_VERSION_MAJOR(val)		FIELD_GET(GENMASK(31, 28), val)
> +#define OCMEM_HW_VERSION_MINOR(val)		FIELD_GET(GENMASK(27, 16), val)
> +#define OCMEM_HW_VERSION_STEP(val)		FIELD_GET(GENMASK(15, 0), val)
> +
>  #define OCMEM_HW_PROFILE_NUM_PORTS(val)		FIELD_GET(0x0000000f, (val))
>  #define OCMEM_HW_PROFILE_NUM_MACROS(val)	FIELD_GET(0x00003f00, (val))
>  
> @@ -355,6 +359,12 @@ static int ocmem_dev_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	reg = ocmem_read(ocmem, OCMEM_REG_HW_VERSION);
> +	dev_dbg(dev, "OCMEM hardware version: %lu.%lu.%lu\n",
> +		OCMEM_HW_VERSION_MAJOR(reg),
> +		OCMEM_HW_VERSION_MINOR(reg),
> +		OCMEM_HW_VERSION_STEP(reg));
> +
>  	reg = ocmem_read(ocmem, OCMEM_REG_HW_PROFILE);
>  	ocmem->num_ports = OCMEM_HW_PROFILE_NUM_PORTS(reg);
>  	ocmem->num_macros = OCMEM_HW_PROFILE_NUM_MACROS(reg);
> 
> ---
> base-commit: 8705151771af822ac794b44504cd72eebc423499
> change-id: 20230509-ocmem-hwver-99bcb33b028b
> 
> Best regards,