Re: [PATCH v2 2/4] dt-bindings: timer: atmel,at91sam9260-pit: convert to yaml

From: Conor Dooley
Date: Mon May 29 2023 - 08:17:46 EST


Hey Claudiu,

On Mon, May 29, 2023 at 09:26:02AM +0300, Claudiu Beznea wrote:
> Convert Microchip AT91 PIT bindings to YAML. Along with it clocks and
> clock-names bindings were added as the drivers needs it to ensure proper
> hardware functionality.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/arm/atmel-sysregs.txt | 12 ---
> .../bindings/timer/atmel,at91sam9260-pit.yaml | 96 +++++++++++++++++++
> 2 files changed, 96 insertions(+), 12 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/timer/atmel,at91sam9260-pit.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index 67a66bf74895..54d3f586403e 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -4,18 +4,6 @@ Chipid required properties:
> - compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid"
> - reg : Should contain registers location and length
>
> -PIT Timer required properties:
> -- compatible: Should be "atmel,at91sam9260-pit"
> -- reg: Should contain registers location and length
> -- interrupts: Should contain interrupt for the PIT which is the IRQ line
> - shared across all System Controller members.
> -
> -PIT64B Timer required properties:
> -- compatible: Should be "microchip,sam9x60-pit64b"
> -- reg: Should contain registers location and length
> -- interrupts: Should contain interrupt for PIT64B timer
> -- clocks: Should contain the available clock sources for PIT64B timer.
> -
> System Timer (ST) required properties:
> - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
> - reg: Should contain registers location and length
> diff --git a/Documentation/devicetree/bindings/timer/atmel,at91sam9260-pit.yaml b/Documentation/devicetree/bindings/timer/atmel,at91sam9260-pit.yaml
> new file mode 100644
> index 000000000000..1cc7b7494e4b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/atmel,at91sam9260-pit.yaml
> @@ -0,0 +1,96 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/atmel,at91sam9260-pit.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip AT91 Periodic Interval Timer (PIT)
> +
> +maintainers:
> + - Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> +
> +description:
> + Microchip AT91 periodic interval timer provides the operating system scheduler
> + interrupt. It is designed to offer maximum accuracy and efficient management,
> + even for systems with long response time.
> +
> +properties:
> + compatible:
> + enum:
> + - atmel,at91sam9260-pit
> + - microchip,sam9x60-pit64b

The missing compatible should probably be added here, rather than
removed from the devicetree.

> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 2
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: atmel,at91sam9260-pit
> + then:
> + properties:

> + interrupts:
> + description:
> + Contain interrupt for the PIT which is the IRQ line shared across all
> + System Controller members.

I think you should drop this & the corresponding section below, since
both PIT and PIT64 have a single interrupt.

Thanks,
Conor.

> + clocks:
> + maxItems: 1
> +
> + else:
> + properties:
> + interrupts:
> + description:
> + PIT64B peripheral interrupt identifier.
> + clocks:
> + minItems: 2
> + clock-names:
> + items:
> + - const: pclk
> + - const: gclk
> + required:
> + - clock-names

Attachment: signature.asc
Description: PGP signature