Re: [PATCH V8 0/7] drm: bridge: samsung-dsim: Support variable clocking

From: Neil Armstrong
Date: Tue May 30 2023 - 04:02:05 EST

On 26/05/2023 16:04, Adam Ford wrote:
On Fri, May 26, 2023 at 2:24 AM Neil Armstrong
<neil.armstrong@xxxxxxxxxx> wrote:

On 26/05/2023 09:22, Neil Armstrong wrote:

On Thu, 25 May 2023 22:05:52 -0500, Adam Ford wrote:
This series fixes the blanking pack size and the PMS calculation. It then
adds support to allows the DSIM to dynamically DPHY clocks, and support
non-burst mode while allowing the removal of the hard-coded clock values
for the PLL for imx8m mini/nano/plus, and it allows the removal of the
burst-clock device tree entry when burst-mode isn't supported by connected
devices like an HDMI brige. In that event, the HS clock is set to the
value requested by the bridge chip.


Thanks, Applied to (drm-misc-next)

[1/7] drm: bridge: samsung-dsim: fix blanking packet size calculation
[2/7] drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]
[3/7] drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically
[4/7] drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY
[5/7] drm: bridge: samsung-dsim: Dynamically configure DPHY timing
[6/7] drm: bridge: samsung-dsim: Support non-burst mode
[7/7] dt-bindings: bridge: samsung-dsim: Make some flags optional

OK I made a bad manipulation, I applied patch 7 without review... I'll send a revert patch.

Sorry, I didn't mean to complicate things by adding the binding patch.
I added a note in the cover letter to indicate it, but I also
recognize that it contradicted my earlier email.

No problem :-)