Re: [PATCH v4 0/9] serial: sc16is7xx: fix GPIO regression and rs485 improvements

[Lech Perczak]

W dniu 29.05.2023 o 16:07, Hugo Villeneuve pisze:
> From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
>
> Hello,
> this patch series mainly fixes a GPIO regression and improve RS485 flags and
> properties detection from DT.
>
> It now also includes various small fixes and improvements that were previously
> sent as separate patches, but that made testing everything difficult.
>
> Patch 1 fixes an issue when debugging IOcontrol register. After testing the GPIO
> regression patches (patches 6 and 7, tests done by Lech Perczak), it appers that
> this patch is also necessary for having the correct IOcontrol register values.
>
> Patch 2 introduces a delay after a reset operation to respect datasheet
> timing recommandations.
>
> Patch 3 fixes an issue with init of first port during probing.
>
> Patch 4 fixes a bug with the output value when first setting the GPIO direction.
>
> Patch 5 is a refactor of GPIO registration code.
>
> Patches 6 and 7 fix a GPIO regression by (re)allowing to choose GPIO function
> for GPIO pins shared with modem status lines.
>
> Patch 8 allows to read common rs485 device-tree flags and properties.
>
> Patch 9 improves comments about chip variants.
>
> I have tested the changes on a custom board with two SC16IS752 DUART using a
> Variscite IMX8MN NANO SOM.
>
> Thank you.
>
> Link: [v1] https://lkml.org/lkml/2023/5/17/967 <https://lkml.org/lkml/2023/5/17/967>
> [v1] https://lkml.org/lkml/2023/5/17/777 <https://lkml.org/lkml/2023/5/17/777>
> [v1] https://lkml.org/lkml/2023/5/17/780 <https://lkml.org/lkml/2023/5/17/780>
> [v1] https://lkml.org/lkml/2023/5/17/785 <https://lkml.org/lkml/2023/5/17/785>
> [v1] https://lkml.org/lkml/2023/5/17/1311 <https://lkml.org/lkml/2023/5/17/1311>
> [v2] https://lkml.org/lkml/2023/5/18/516 <https://lkml.org/lkml/2023/5/18/516>
> [v3] https://lkml.org/lkml/2023/5/25/7 <https://lkml.org/lkml/2023/5/25/7>
>
> Changes for V3:
> - Integrated all patches into single serie to facilitate debugging and tests.
> - Reduce number of exported GPIOs depending on new property
> nxp,modem-control-line-ports
> - Added additional example in DT bindings
>
> Changes for V4:
> - Increase reset post delay to relax scheduler.
> - Put comments patches at the end.
> - Remove Fixes tag for patch "mark IOCONTROL register as volatile".
> - Improve commit messages after reviews.
> - Fix coding style issues after reviews.
> - Change GPIO registration to always register the maximum number of GPIOs
> supported by the chip, but maks-out GPIOs declared as modem control lines.
> - Add patch to refactor GPIO registration.
> - Remove patch "serial: sc16is7xx: fix syntax error in comments".
> - Remove patch "add dump registers function"
>
> Hugo Villeneuve (9):
> serial: sc16is7xx: mark IOCONTROL register as volatile
> serial: sc16is7xx: add post reset delay
> serial: sc16is7xx: fix broken port 0 uart init
> serial: sc16is7xx: fix bug when first setting GPIO direction
> serial: sc16is7xx: refactor GPIO controller registration
> dt-bindings: sc16is7xx: Add property to change GPIO function
> serial: sc16is7xx: fix regression with GPIO configuration
> serial: sc16is7xx: add call to get rs485 DT flags and properties
> serial: sc16is7xx: improve comments about variants
>
> .../bindings/serial/nxp,sc16is7xx.txt | 46 ++++++
> drivers/tty/serial/sc16is7xx.c | 150 +++++++++++++-----
> 2 files changed, 156 insertions(+), 40 deletions(-)
>
>
> base-commit: 8b817fded42d8fe3a0eb47b1149d907851a3c942

It would be a lot of sending, to do that for every patch separately, so for whole series:
Reviewed-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx>

And where applicable - for code patches:
Tested-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx>

I tested whole series at the same time.
I did my tests on an i.MX6 board with SC16IS760 over SPI, which differs a tiny bit from SC16IS752,
and everything works as it should.
Thank you for fixing this!

> -- 
> 2.30.2
>
-- 
Pozdrawiam/With kind regards,
Lech Perczak

Sr. Software Engineer
Camlin Technologies Poland Limited Sp. z o.o.
Strzegomska 54,
53-611 Wroclaw
Tel:     (+48) 71 75 000 16
Email:   lech.perczak@xxxxxxxxxxxxxxx
Website: http://www.camlingroup.com