Re: [PATCH net-next v4 0/6] microchip_t1s: Update on Microchip 10BASE-T1S PHY driver

From: patchwork-bot+netdevbpf
Date: Tue May 30 2023 - 06:00:31 EST


This series was applied to netdev/net-next.git (main)
by Paolo Abeni <pabeni@xxxxxxxxxx>:

On Fri, 26 May 2023 20:53:42 +0530 you wrote:
> This patch series contain the below updates,
> - Fixes on the Microchip LAN8670/1/2 10BASE-T1S PHYs support in the
> net/phy/microchip_t1s.c driver.
> - Adds support for the Microchip LAN8650/1 Rev.B0 10BASE-T1S Internal
> PHYs in the net/phy/microchip_t1s.c driver.
> Changes:
> v2:
> - Updated cover letter contents.
> - Modified driver description is more generic as it is common for all the
> Microchip 10BASE-T1S PHYs.
> - Replaced read-modify-write code with phy_modify_mmd function.
> - Moved */ to the same line for the single line comments.
> - Changed the type int to u16 for LAN865X Rev.B0 fixup registers
> declaration.
> - Changed all the comments starting letter to upper case for the
> consistency.
> - Removed return value check of phy_read_mmd and returned directly in the
> last line of the function lan865x_revb0_indirect_read.
> - Used reverse christmas notation wherever is possible.
> - Used FIELD_PREP instead of << in all the places.
> - Used 4 byte representation for all the register addresses and values
> for consistency.
> - Comment for indirect read is modified.
> - Implemented "Reset Complete" status polling in config_init.
> - Function lan865x_setup_cfgparam is split into multiple functions for
> readability.
> - Reference to AN1760 document is added in the comment.
> - Removed interrupt disabling code as it is not needed.
> - Provided meaningful macros for the LAN865X Rev.B0 indirect read
> registers and control.
> - Replaced 0x10 with BIT(4).
> - Removed collision detection disable/enable code as it can be done with
> a separate patch later.
> [...]

Here is the summary with links:
- [net-next,v4,1/6] net: phy: microchip_t1s: modify driver description to be more generic
- [net-next,v4,2/6] net: phy: microchip_t1s: replace read-modify-write code with phy_modify_mmd
- [net-next,v4,3/6] net: phy: microchip_t1s: update LAN867x PHY supported revision number
- [net-next,v4,4/6] net: phy: microchip_t1s: fix reset complete status handling
- [net-next,v4,5/6] net: phy: microchip_t1s: remove unnecessary interrupts disabling code
- [net-next,v4,6/6] net: phy: microchip_t1s: add support for Microchip LAN865x Rev.B0 PHYs

You are awesome, thank you!
Deet-doot-dot, I am a bot.