Re: [PATCH v4 6/6] ASoC: dt-bindings: Add tas2781 amplifier

[Krzysztof Kozlowski]

On 28/05/2023 00:36, Shenghao Ding wrote:
> Create tas2781.yaml for tas2781 driver.
> 
> Signed-off-by: Shenghao Ding <13916275206@xxxxxxx>
> 
> ---
> Changes in v4:
>  - remove '\t' in the file

Keep the rest of the changelog.

>  Changes to be committed:
> 	new file:   Documentation/devicetree/bindings/sound/ti,tas2781.yaml

This is useless, drop.

Your mail threading is still broken. This breaks usage with b4, so I
cannot easily make diffs or apply it easily (e.g. via any message ID). I
already mentioned this and no improvements at v4.



> ---
>  .../devicetree/bindings/sound/ti,tas2781.yaml | 88 +++++++++++++++++++
>  1 file changed, 88 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
> new file mode 100644
> index 000000000000..b3dcd7b18f5d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments TAS2781 SmartAMP
> +
> +maintainers:
> +  - Shenghao Ding <shenghao-ding@xxxxxx>
> +
> +description:
> +  The TAS2781 is a mono, digital input Class-D audio amplifier
> +  optimized for efficiently driving high peak power into small
> +  loudspeakers. Integrated an on-chip DSP supports Texas Instruments
> +  Smart Amp speaker protection algorithm. The integrated speaker
> +  voltage and current sense provides for real time
> +  monitoring of loudspeaker behavior.
> +
> +allOf:
> +  - $ref: dai-common.yaml#
> +
> +properties:
> +  '#address-cells':
> +    const: 1
> +  '#size-cells':
> +    const: 0

Put compatible first. What's more I don't understand why added it. Your
changelog does not explain it - you wrote there is only one change, fix
of tab.

> +
> +  compatible:
> +    enum:
> +      - ti,tas2781
> +
> +  reg:
> +    description:
> +      I2C address, in multiple tas2781s case, all the i2c address
> +      aggreate as one Audio Device to support multiple audio slots.
> +    maxItems: 4
> +    items:
> +      minimum: 0x38
> +      maximum: 0x3f
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  ti,broadcast-addr:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Generic I2C address for all the tas2781 devices in
> +      purpose of I2C broadcast during the multi-device
> +      writes, useless in mono case or remove this item to
> +      disable broadcast mode.
> +
> +  '#sound-dai-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +   #include <dt-bindings/gpio/gpio.h>
> +   i2c {
> +     /* example with quad support, such as tablet or pad device */
> +     #address-cells = <1>;
> +     #size-cells = <0>;
> +     quad: codec@38 {
> +       compatible = "ti,tas2781";
> +       reg = < 0x38 /* Audio slot 0 */
> +               0x3a /* Audio slot 1 */
> +               0x39 /* Audio slot 2 */
> +               0x3b /* Audio slot 3 */

These should be four items, right? <0x38>, <0x3a> etc. Drop spaces
around <>, that's not DTS syntax.


> +               >;
> +       #sound-dai-cells = <1>;
> +       reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH >;

Drop redundant white space.



Best regards,
Krzysztof